BEEPER Beretti Scolopax 4.0 Radio Collar Instruction Manual

1. Introduktion

The BEEPER Beretti Scolopax 4.0 is an advanced radio collar designed for hunting dogs, specifically optimized for woodcock hunting. This device features unique sound profiles, including a 'bell' sound that does not disturb wildlife, and is engineered for high audibility over long distances. Its robust construction ensures durability and resistance to environmental factors, making it a reliable tool for hunters.

The Scolopax 4.0 incorporates baritone sounds with a very low frequency and high volume, allowing sounds to propagate effectively through dense vegetation over greater distances compared to conventional beepers. It offers 32 distinct sounds for both search and point phases, including specialized sounds like the 'falcon' and 'mushroom' that are less likely to disturb woodcocks.

2. Pakkens indhold

Kontroller venligst pakken for at sikre, at alle varer er til stede:

• Beeper Scolopax 4.0 Unit
• Orange Collar
• Gold Seal/Gasket
• 3 x AA batterier
• Skruetrækker
• Magnetisk nøgle
• Instruktionshæfte
• Product Carrying Case

Image: The durable black carrying case provided with the Beeper Scolopax 4.0, designed for protection and transport.

3. Opsætning

3.1 Batteriinstallation

1. Locate the battery compartment on the beeper unit. The unit features a secure, waterproof cap closure system.
2. Using the provided screwdriver, carefully open the battery compartment.
3. Isæt de 3 AA-batterier, og sørg for at polerne (+/-) vender korrekt som angivet inde i batterirummet.
4. Close the battery compartment securely with the cap and tighten with the screwdriver to maintain its waterproof seal.

Image: The Beeper Scolopax 4.0 unit with its battery compartment open, showing three AA batteries ready for installation. The unit is black with a red accent.

3.2 Fastgørelse til halsbånd

Thread the orange collar through the designated loops on the beeper unit. Ensure the unit is securely fastened to the collar and positioned comfortably for your dog.

4. Betjeningsvejledning

4.1 Tænd/sluk

The Beeper Scolopax 4.0 can be powered on or off using the provided magnetic key. Simply pass the magnetic key over the designated area on the beeper unit to activate or deactivate it. Alternatively, inserting the batteries will power on the device.

4.2 Lydtilstande og justeringer

The device offers 32 distinct sounds: 16 for the dog's search phase and 16 for when the dog is on point (stop). These include unique 'bell' and 'mushroom' sounds designed not to disturb game.

• Adjusting Pause Time: The pause time between sounds during the dog's search phase can be adjusted from 4 to 60 seconds. Use the internal settings (accessible with the screwdriver) to set your preferred interval.
• Silent Pointing Trigger: The beeper features a silent trigger for when the dog goes on point, ensuring minimal disturbance to the game.
• Delayed Sound on Point: An internal setting allows you to set a delay for the sound to activate once the dog is on point. This can be adjusted using the screwdriver.

Image: The Beeper Scolopax 4.0 unit shown alongside its remote control, illustrating the system's components for operation.

4.3 Battery Status Signal

Upon power-on, the device emits different sounds to indicate the current battery status, allowing you to monitor battery life effectively.

5. Vedligeholdelse

5.1 Rengøring

Regularly clean the beeper unit with a damp klud til at fjerne snavs og snavs. Undgå at bruge barske kemikalier eller slibende materialer, der kan beskadige casing eller tætninger.

5.2 Udskiftning af batteri

When the battery status signal indicates low power, replace all three AA batteries simultaneously. Always use fresh, high-quality AA batteries for optimal performance and battery life.

5.3 Vandtæt forsegling

The beeper unit is designed with a waterproof cap closure. Ensure this cap is always securely fastened after battery changes or adjustments to maintain its water resistance. Periodically inspect the gold seal/gasket for any signs of wear or damage and replace if necessary.

6. Fejlfinding

• Ingen lyd:
  • Check if the unit is powered on using the magnetic key.
  • Sørg for, at batterierne er korrekt installeret og ikke er afladede.
• Svag lyd:
  • Udskift AA-batterierne med nye.
• Beeper Not Responding:
  • Verify the magnetic key is functioning correctly.
  • Kontroller batteriforbindelserne og sørg for, at de er sikre.

7. Specifikationer

8. Garanti og support

8.1 Garanti

The BEEPER Beretti Scolopax 4.0 comes with a 24 måneders garanti fra købsdatoen. Denne garanti dækker fabrikationsfejl ved normal brug. Gem venligst din købsbevis i tilfælde af garantikrav.

8.2 Support

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact your retailer or the manufacturer directly. Refer to the contact information provided in your product packaging or on the official BEEPER webwebsted.