1. Introduktion
The Electro Voice EVOLVE30M-W is a compact and powerful active PA speaker system designed for solo musicians, small groups, and mobile entertainers. It offers exceptional sound coverage and performance in a portable and easy-to-use package. The system includes a subwoofer, a column array, and a pole for simple and intuitive setup.
Key features include a 10-inch subwoofer housed in a 15mm plywood enclosure, a column array with six 2.8-inch neodymium drivers, and an integrated cable pole with magnetic locking for quick assembly. The system boasts 1000W peak power, a wide 120° x 40° coverage angle, and a maximum SPL of 122 dB.
2. Produktkomponenter og deroverview
The EVOLVE30M-W system consists of three main components:
- subwoofer: Houses the 10-inch woofer and the amplifier, with integrated QuickSmartDSP and control panel.
- Kolonneopstilling: Contains six 2.8-inch neodymium drivers for high-frequency reproduction.
- Two-Piece Pole: Connects the column array to the subwoofer, featuring integrated cabling and magnetic locking.
Figur 2.1: Eksploderet view showing the subwoofer, pole, and column array components.
Figure 2.2: The EVOLVE30M-W system components laid out, including the subwoofer, pole sections, column array, and protective bags.
3. Opsætningsvejledning
Setting up your EVOLVE30M-W system is quick and straightforward:
- Placer subwooferen: Place the subwoofer on a stable, flat surface where you intend to use the system. Ensure adequate ventilation around the unit.
- Saml stangen: Connect the two sections of the aluminum pole. The integrated cabling will automatically connect as you join the sections.
- Insert the Pole into Subwoofer: Carefully insert the assembled pole into the designated slot on top of the subwoofer. The magnetic lock will secure it in place.
- Fastgør kolonnearrayet: Place the column array onto the top of the pole. Ensure it clicks securely into position. The electrical connection for the array is made automatically through the pole.
- Tilslut strøm: Plug the power cable into the subwoofer's power inlet and then into a suitable AC power outlet.
Figure 3.1: The EVOLVE30M-W system fully assembled and ready for use.
Figur 3.2: Endnu en front view of the assembled EVOLVE30M-W, highlighting its sleek design.
Figur 3.3: Sideprofile of the assembled EVOLVE30M-W system.
4. Betjeningsvejledning
The EVOLVE30M-W features a comprehensive control panel and QuickSmartDSP for easy operation and sound optimization.
4.1 Kontrolpanel og tilslutninger
The rear panel of the subwoofer provides all necessary inputs, outputs, and controls:
Figur 4.1: Detaljeret view of the EVOLVE30M-W control panel.
Figure 4.2: Angled perspective of the EVOLVE30M-W control panel, showing input and output sections.
- Indgange:
- 6 x XLR/TRS Combo Jacks (Inputs 1-4 for Line/Mic, Inputs 5/6 for Line)
- 1 x 3.5mm Minijack (Aux In)
- 1 x Stereo RCA (Aux In)
- 1 x 6.3mm Hi-Z Jack (for instruments)
- 1 x 6.3mm Footswitch Jack
- Udgange:
- 1 x XLR Mix Out
- 1 x XLR Aux Out
- QuickSmartDSP Display and Control Knob: Navigate menus, adjust settings, and select presets.
- Hovedvolumen: Controls the overall output level of the system.
- Bluetooth-parringsknap: For connecting Bluetooth audio devices.
4.2 QuickSmartDSP Functions
The integrated QuickSmartDSP provides advanced processing with single-knob control and an LCD screen:
- 4 forudindstillinger: Music, Live, Speech, Club – optimize sound for different applications.
- Multi-Band EQ: Fine-tune the frequency response.
- 5 User Presets: Save your custom settings for quick recall.
- Udgangsforsinkelse: Adjust delay for proper time alignment in multi-speaker setups.
- Fantomkraft: Enable for condenser microphones on relevant inputs.
- Indgangsniveaukontrol: Adjust individual input gains.
- Masterniveaukontrol: Overall system volume.
4.3 EV QuickSmart Mobile App
The EV QuickSmart Mobile App allows you to configure, control, and monitor up to six EVOLVE systems simultaneously from your mobile device. Download the app from your device's app store for enhanced control capabilities.
5. Vedligeholdelse
Proper maintenance ensures the longevity and optimal performance of your EVOLVE30M-W system:
- Rensning: Use a soft, dry cloth to clean the exterior surfaces of the subwoofer, pole, and column array. For stubborn dirt, a slightly damp en tør klud kan bruges. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Opbevaring: When not in use, store the system in a dry, temperate environment. Utilize the included transport bag for the column array and pole to protect them during transport and storage.
- Ventilation: Ensure the subwoofer's ventilation grilles are clear of obstructions to prevent overheating.
- Kabelpleje: Inspect all cables regularly for signs of wear or damage. Replace any damaged cables immediately.
6. Fejlfinding
If you encounter issues with your EVOLVE30M-W system, refer to the following common troubleshooting steps:
- Ingen strøm:
- Check if the power cable is securely connected to both the subwoofer and the power outlet.
- Ensure the power switch on the subwoofer is in the 'ON' position.
- Kontroller, at stikkontakten fungerer ved at tilslutte en anden enhed.
- Ingen lyd:
- Check all audio cable connections from your source devices to the subwoofer inputs.
- Ensure the Master Volume knob is turned up.
- Verify individual input levels are not set too low or muted via the DSP.
- Confirm the column array is properly seated on the pole and the pole is securely connected to the subwoofer.
- Forvrænget lyd:
- Reduce the input level from your source device or the input gain on the subwoofer to prevent clipping.
- Kontroller for beskadigede kabler.
- Ensure the system is not being overdriven (Master Volume too high).
- Problemer med Bluetooth-forbindelse:
- Sørg for, at Bluetooth er aktiveret på din kildeenhed.
- Press and hold the Bluetooth pairing button on the subwoofer to enter pairing mode.
- Move your source device closer to the subwoofer.
- Prøv at ophæve parringen og parre enheden igen.
For more complex issues or if the problem persists, please contact Electro-Voice customer support or refer to the official product support webwebsted.
7. Specifikationer
Detailed technical specifications for the Electro Voice EVOLVE30M-W active PA speaker system:
| Feature | Specifikation |
|---|---|
| Modelnummer | EVOLVE30M-W |
| Udgangseffekt (peak) | 1000 W |
| Frekvensrespons (-3 dB) | 43 - 20,000 Hz |
| Frekvensrespons (-10 dB) | 37 - 20,000 Hz |
| Maksimal SPL | 122 dB |
| Coverage Angle (H x V) | 120° x 40° |
| Crossover-frekvens | 200 Hz |
| Subwoofer driver | 10-tommer bashøjttaler |
| Kolonne Array Drivere | 6 x 2.8-tommer neodym-drivere |
| Subwoofer Enclosure Material | 15mm krydsfiner |
| Column Array Material | Komposit |
| Stangmateriale | Aluminium |
| Subwooferens dimensioner (H x B x D) | 530 x 345 x 471 mm (20.9 x 13.6 x 18.5 tommer) |
| Column Array Dimensions (H x W x D) | 825 x 102 x 172 mm (32.5 x 4.0 x 6.8 tommer) |
| Pole Dimensions (H x W x D) | 929 x 48.5 x 55 mm (36.6 x 1.9 x 2.2 tommer) |
| Subwoofer-vægt | 20.3 kg (44.75 lbs) |
| Column Array Weight | 4.7 kg (10.36 lbs) |
| Pole Weight | 1.25 kg (2.76 lbs) |
| Total System Weight (approx.) | 26.25 kg (57.87 lbs) |
| Forbindelse | Hjælpefunktion, Bluetooth |
| Særlige funktioner | Transportabel |
8. Garanti og support
For detailed warranty information, please refer to the warranty card included with your product or visit the official Electro-Voice webGarantibetingelserne kan variere fra region til region.
For technical support, service, or additional product information, please contact Electro-Voice customer service or visit their official support portal. You can typically find contact details on the Electro-Voice webwebsted eller i produktemballagen.
Online ressourcer:
- Official Electro-Voice Webwebsted: www.electrovoice.com
- Product Support Pages: Refer to the support section on the official website for FAQs, software updates, and additional documentation.