Godox DP600III 600Ws Professional Studio Flash User Manual

1. Introduktion

The Godox DP600III is a powerful 600Ws professional studio flash designed for high-quality photography. It features a consistent color temperature, rapid recycle times, and versatile power control, making it suitable for various studio applications. This manual provides essential information for the safe and effective use of your DP600III studio flash.

Figure 1.1: Godox DP600III 600Ws Professional Studio Flash overview.

2. Sikkerhedsinstruktioner

Please read and understand all safety precautions before using this product to prevent injury to yourself or others and damage to the unit. Keep this manual for future reference.

• Do not disassemble or modify the unit. If the product fails, it must be repaired by an authorized maintenance center.
• Opbevar dette produkt tørt. Må ikke håndteres med våde hænder eller nedsænkes i vand.
• Brug ikke blitzenheden i nærheden af ​​brandfarlige gasser, kemikalier eller andre materialer.
• Flashrøret og modellering lamp can become very hot during operation. Avoid touching them immediately after use.
• Always disconnect the power cable before cleaning or performing maintenance.
• Sørg for, at enheden er korrekt jordet.
• Do not point the flash directly at human or animal eyes from a close distance.

3. Hvad er der i æsken

Kontroller, at alle komponenter er til stede ved udpakning:

• Godox DP600III Studio Flash Unit
• Strømkabel
• Modellering L.amp
• Lamp Cover (Protector)

Note: Modifiers and other accessories are sold separately unless specified by your retailer.

4. Opsætning

4.1 Montering på et lysstativ

Mount the DP600III onto a standard light stand using the integrated mounting bracket. Secure it by tightening the locking knob on the bracket.

Figure 4.1: DP600III attached to a light stand.

4.2 Installing the Flash Tube and Modeling Lamp

Carefully insert the flash tube and modeling lamp into their respective sockets. Ensure they are seated firmly. Always use the lamp cover when transporting or storing the unit to protect the bulbs.

Figure 4.2: Flash tube and Bowens mount area.

4.3 Tilslutning af strøm

Connect the provided power cable to the power input on the rear of the flash unit and then to a suitable AC power outlet (AC200-240V~50/60Hz). Ensure the power switch is in the OFF position before connecting.

5. Betjeningsvejledning

5.1 Tænd/sluk

Tryk på tænd/sluk-knappen på bagpanelet for at tænde eller slukke for enheden.

Figure 5.1: Rear control panel of the DP600III.

5.2 Justering af blitzstyrke

The flash output can be adjusted from 1/32 to full power (1/1) in 50 precise steps. Use the dial on the control panel to increase or decrease the power level. The current power setting is displayed on the LCD screen.

5.3 Modellering Lamp Tilstande

150W modellerings-lamp can be set to three modes:

• OFF: Modellering lamp er slukket.
• PROP (Proportional): Modelleringen lamp's brightness adjusts proportionally to the flash power setting.
• PERCENTAGE: Modelleringen lamp's brightness can be manually set to a specific percentage.

Tryk på modellerings lamp knappen for at gennemgå disse tilstande.

Figure 5.2: Control panel with modeling lamp indstillinger.

5.4 Wireless Control System

The DP600III features a built-in Godox 2.4G Wireless X System receiver. This allows for remote control of flash power, modeling lamp, and other functions using a compatible Godox X-series transmitter (e.g., XT2, XPro, XT32, FT-16, sold separately).

• Group (GR) and Channel (CH) Settings: Use the GR/CH button and dial to set the desired group and channel for wireless communication. Ensure your transmitter is set to the same group and channel.
• Wireless ID Setting: For advanced interference avoidance, set a unique Wireless ID (01-99) on both the flash and the transmitter.

5.5 Sync Modes (S1/S2)

The DP600III supports S1 and S2 optical slave modes for triggering by another flash. Press the S1/S2 button to activate these modes.

• S1 tilstand: The flash will fire in response to the first flash from a master flash. Suitable for manual flash.
• S2 tilstand: The flash will ignore the first pre-flash from a master flash (e.g., TTL flash) and fire on the second flash.

5.6 Brugerdefinerede funktioner (C.Fn)

The unit includes custom functions for advanced settings. Refer to the detailed manual (available online) for a complete list and instructions on adjusting C.Fn settings.

6. Vedligeholdelse

• Rensning: Use a soft, dry cloth to clean the unit. For stubborn dirt, a slightly damp en tør klud kan bruges. Brug ikke skrappe kemikalier eller opløsningsmidler.
• Opbevaring: Store the unit in a cool, dry place away from direct sunlight and excessive humidity. Always attach the lamp cover to protect the flash tube and modeling lamp under opbevaring og transport.
• Udskiftning af pære: If the flash tube or modeling lamp needs replacement, ensure the unit is unplugged and cooled down. Carefully remove the old bulb and insert the new one, avoiding direct contact with the glass part of the new bulb.

7. Fejlfinding

8. Specifikationer

9. Garanti og support

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Godox webwebsted. Behold din købskvittering som købsbevis i tilfælde af garantikrav.

For yderligere assistance, kontakt Godox kundeservice eller din lokale distributør.