1. Produktet er slutview
The Design House 588079 Stem Mount Photocontrol is an outdoor, 120-volt device designed for automatic lighting control. It features a built-in daylight sensor that activates connected lighting at dusk and deactivates it at dawn, providing energy-efficient operation for commercial and residential applications. Constructed from durable aluminum, this photocontrol is UL listed for wet locations and is Title 2 compliant.
Billede 1.1: Eks.ample of outdoor lighting application controlled by a photocontrol.
2. Sikkerhedsoplysninger
WARNING: Risk of Electric Shock. Turn off power at the circuit breaker or fuse box before installation or servicing. Improper installation can result in serious injury or death.
- Always ensure the main power supply is disconnected before attempting any electrical work.
- Dette produkt skal installeres i overensstemmelse med den gældende installationskode af en person, der er bekendt med produktets konstruktion og drift og de involverede farer.
- Overskrid ikke den angivne voltage og wattage vurderinger.
- Sørg for, at alle ledningsforbindelser er sikre og korrekt isolerede.
- This device is suitable for wet locations. Ensure all outdoor enclosures are properly sealed after installation.
3. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | 588079 |
| Byggemateriale | Aluminium |
| Voltage | 120V |
| Wattage (Wolfram) | 2000W |
| Wattage (Ballast) | 2000VA |
| Dimensioner (H x B x D) | 3.5 tommer x 2 tommer x 1.5 tommer |
| Varens vægt | 5.9 ounce |
| Placeringsvurdering | UL-godkendt til våde steder |
Image 3.1: Product dimensions for the Design House 588079 Photocontrol.
Image 3.2: Indication of suitability for wet locations.
4. Opsætning og installation
This photocontrol is designed for stem mounting and hard-wired electrical connections. Professional installation is recommended.
4.1 Nødvendigt værktøj
- Screwdriver (for mounting and wiring connections)
- Afisoleringstænger
- Elektrisk tape eller ledningsmøtrikker
Image 4.1: The photocontrol is designed for straightforward installation.
4.2 Ledningsinstruktioner
Before beginning, ensure power is OFF at the circuit breaker.
- Sort ledning: Connect the black wire from the photocontrol to the 120V LINE (hot) wire from the power source.
- Hvid ledning: Connect the white wire from the photocontrol to the NEUTRAL wire from the power source and to the neutral wire of the light fixture.
- Rød ledning: Connect the red wire from the photocontrol to the LOAD (hot) wire of the light fixture.
- Secure all connections with appropriate wire nuts and electrical tape.
Image 4.2: Illustration of hard-wired electrical connection.
4.3 Montering
Mount the photocontrol in a location where it will receive unobstructed natural light throughout the day. Avoid areas where artificial light sources (e.g., streetlights, porch lights) might shine directly onto the sensor, as this could interfere with its operation.
5. Betjeningsvejledning
The Design House 588079 Photocontrol operates automatically based on ambient light levels.
- Dusk Activation: When the ambient light level drops below a certain threshold (typically at dusk), the photocontrol will automatically turn on the connected lighting.
- Dawn Deactivation: When the ambient light level rises above a certain threshold (typically at dawn), the photocontrol will automatically turn off the connected lighting.
- Tidsforsinkelse: The photocontrol incorporates a time delay feature to prevent false triggering from transient light changes (e.g., car headlights, lightning flashes). This means there will be a slight delay (typically a few seconds to a couple of minutes) between the change in light level and the activation or deactivation of the lights.
Image 5.1: Visual representation of the dusk to dawn operation.
6. Vedligeholdelse
The Design House 588079 Photocontrol requires minimal maintenance.
- Rensning: Periodically inspect the photocontrol sensor for any dirt, dust, or debris that may obstruct the light sensor. Gently clean the sensor surface with a soft, damp klæde. Brug ikke slibende rengøringsmidler.
- Inspektion: Annually inspect the wiring connections and the housing for any signs of wear, damage, or corrosion. Ensure the mounting is secure.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lysene tændes ikke i skumringen. | No power, faulty wiring, sensor obstructed, sensor exposed to artificial light. | Check circuit breaker. Verify wiring connections. Clean sensor. Relocate photocontrol away from artificial light sources. |
| Lights do not turn off at dawn. | Sensor obstructed, sensor exposed to artificial light. | Clean sensor. Relocate photocontrol away from artificial light sources. |
| Lights flicker or cycle on/off rapidly. | Interference from nearby light, faulty connection. | Ensure sensor is not exposed to intermittent light. Check wiring connections for looseness. |
8. Garanti og support
This Design House 588079 Photocontrol is covered by a 5 års begrænset garanti fra købsdatoen. Denne garanti dækker fejl i materialer og udførelse ved normal brug.
Image 8.1: The product is backed by a 5-year limited warranty.
For warranty claims, technical support, or further assistance, please contact Design House customer service. Keep your proof of purchase for warranty validation.