Intex SX3000 Krystal Clear Sandfilterpumpe Brugermanual

1. Vigtige sikkerhedsinstruktioner

Læs, forstå og følg alle instruktioner omhyggeligt, før du installerer og bruger dette produkt. Gem denne manual til senere brug.

• Elektrisk sikkerhed: Always disconnect the power cord from the electrical outlet before performing any maintenance or servicing. Ensure the pump is connected to a grounded outlet protected by a Ground Fault Circuit Interrupter (GFCI).
• Vandsikkerhed: Never operate the pump when people are in the pool. Ensure all connections are secure to prevent leaks.
• Børn: Dette apparat kan bruges af børn i alderen 8 år og derover og personer med nedsatte fysiske, sensoriske eller mentale evner eller mangel på erfaring og viden, hvis de har fået opsyn eller instruktion i brugen af ​​apparatet på en sikker måde og forstår de involverede farer. . Børn må ikke lege med apparatet. Rengøring og brugervedligeholdelse må ikke udføres af børn uden opsyn.
• Placering: Position the pump on a firm, level surface, elevated to prevent water damage. Do not bury the power cord.
• Kemikalier: Håndter poolkemikalier forsigtigt, og følg producentens anvisninger.

2. Produktet er slutview

The Intex SX3000 Krystal Clear Sand Filter Pump is designed to provide efficient and reliable filtration for above-ground pools. It features HydroAeration Technology for improved water quality and a built-in timer for automated operation.

Figure 2.1: Intex Krystal Clear Sand Filter Pump SX3000

Nøglefunktioner:

• HydroAeration-teknologi: Enhances water circulation, filtration, and clarity while increasing negative ioner.
• Nem installation: Designed for straightforward setup with minimal assembly.
• 24-timers timer: Built-in timer with 2 to 12-hour preset cycles for automatic operation.
• 3000 GPH Pump Flow Rate: Provides a powerful flow rate for effective cleaning of pools up to 19,600 gallons.
• Deluxe vægmonteret overfladeskimmer: Automatically collects leaves and debris from the water surface.

Figure 2.2: Visual representation of the sand filter pump's key features including the built-in timer, pressure gauge, 6-function valve, and strainer basket.

Figure 2.3: Explanation of Intex's patented HydroAeration Technology for improved filtration, clarity, and freshness in above-ground pools.

3. Opsætning og installation

Follow these steps to properly set up your Intex SX3000 Sand Filter Pump. Refer to the video for a visual guide.

1. Udpak komponenter: Carefully remove all parts from the packaging. Ensure all components listed in the manual are present.
2. Assemble Filter Tank: Insert the bottom filter components and tubing into the filter tank as shown in the video. Secure the top part of the filter tank.
3. Prepare Pump Motor: Remove any protective tapes or stickers from the pump motor's inlet/outlet ports. Ensure O-rings are correctly seated.
4. Tilslutning til pool: Before connecting, ensure the pool's inlet and outlet ports are capped or closed to prevent water loss. Replace the standard pool inlet/outlet fittings with the provided larger fittings for optimal flow.
5. Positioner pumpe: Place the pump on a stable, level surface, ideally elevated slightly to prevent water accumulation around the motor. Bricks or a dedicated pump pad can be used.
6. Fyld med sand: Carefully pour the recommended amount of #20 silica sand (approximately 120 lbs or 55 kg) into the filter tank. Avoid getting sand into the central pipe.
7. Tilslut slanger: Connect the hoses from the pump to the filter tank and from the filter tank to the pool's inlet/outlet ports. Ensure all connections are tight and secure to prevent leaks. Use Hose Adapter A w/Collar if your pool requires it.
8. Forbered pumpen: Before starting, ensure the filter tank is filled with water. Open the air release valve on top of the pump to allow air to escape until a steady stream of water emerges.

Figure 3.1: Proper placement and connection of the sand filter pump to an above-ground pool.

Figure 3.2: The filter pump system includes two 1.5" connector hoses and a HydroAeration Technology inlet fitting for simple connection.

4. Betjening

The multi-port valve on top of the filter tank allows you to select different operating modes. Always turn off the pump before changing valve settings.

1. Filter (Normal Operation): This setting is used for daily filtering of pool water. Water flows through the sand, trapping debris, and returns to the pool.
2. Tilbageskylning: Used to clean the sand filter. Water flows in reverse through the sand, flushing trapped debris out through the waste port. Perform backwash when the pressure gauge indicates a high reading (typically in the red zone).
3. Skylle: After backwashing, use this setting to rinse the sand and settle the sand bed before returning to filter mode. Water flows through the sand and out the waste port.
4. Spild: Bypasses the filter and sends water directly out the waste port. Useful for quickly lowering pool water level or vacuuming heavy debris directly to waste.
5. Recirkuler: Circulates pool water without passing it through the filter. Useful for distributing chemicals without filtering.
6. Lukket: Shuts off all flow to the filter. Use this setting when performing maintenance on the pump or filter.

24-timers timer: Use the built-in timer to set automatic operating cycles. Refer to the pump's control panel for specific timer programming instructions.

5. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer optimal ydeevne og levetid for din sandfilterpumpe.

• Backwash and Rinse: Perform backwashing and rinsing regularly, typically once a week or when the pressure gauge indicates a rise of 3-5 PSI above the clean operating pressure.
• Clean Strainer Basket: Periodically check and clean the strainer basket located in the pump motor. Turn off the pump, close valves, and remove the lid to access the basket.
• Sandudskiftning: The filter sand should be replaced approximately every 5 years, depending on usage and water quality.
• Vinterisering: At the end of the swimming season, drain all water from the pump, filter tank, and hoses. Store components in a dry, frost-free area.

Figure 5.1: Regularly clean the strainer basket to ensure efficient pump operation.

Figure 5.2: The automatic pool skimmer features an easy-to-clean strainer basket and durable polypropylene plastic construction with an adjustable bracket.

6. Fejlfinding

If you encounter issues with your sand filter pump, refer to the following common problems and solutions:

7. Specifikationer

Detailed technical specifications for the Intex SX3000 Krystal Clear Sand Filter Pump.

• Mærke: Intex
• Modelnummer: 28635EG
• Materiale: Plast, polypropylen (PP)
• Stil: Over Jorden
• Strømkilde: Elektrisk med ledning
• Pump Flow Rate (Pump Capacity): 3,000 GPH (11,356 LPH)
• System Flow Rate (In Pool): 2,450 GPH (9,274 LPH)
• Maksimal gennemstrømningshastighed: 50 gallon pr. Minut
• Sandkapacitet: 120 lb (55 kg) #20 Silica
• Pool Size/Water Capacity: Minimum 5,500 gal (20.8m³), Maximum 19,600 gal (74.2m³)
• Voltage: 110-120 V (with GFCI)

Figure 7.1: Key specifications for the Intex Sand Filter Pump, including system flow rate, sand capacity, pool size, and voltage.

Figure 7.2: Specifications for the automatic pool skimmer, including minimum filtration pump flow rate and compatibility with Easy Set or Metal Frame Pool sidewalls.

8. Garanti og support

Intex products are manufactured to the highest quality standards. For warranty information, technical support, or to purchase replacement parts, please refer to the contact information provided in your product packaging or visit the official Intex webwebsted.

Keep your original purchase receipt as proof of purchase may be required for warranty claims.