Indledning
The Monoprice SS-4 Premium 4 Channel Speaker Selector is designed to connect up to four pairs of 4-ohm or 8-ohm speakers to a single amplifier or receiver. It features resistor-based impedance matching circuitry to maintain a safe impedance load for your audio equipment. Each speaker zone can be independently turned on or off using the front panel buttons.
Sikkerhedsoplysninger
- Læs disse instruktioner omhyggeligt inden brug.
- Gem denne vejledning til fremtidig reference.
- Do not expose this device to moisture or extreme temperatures.
- Ensure all connections are secure before powering on your audio system.
- Use only the recommended speaker wire gauges (12-16 AWG).
Pakkens indhold
Please ensure all items listed below are present in your package. If anything is missing or damaged, contact Monoprice Customer Service.
- 1x Monoprice SS-4 Premium 4 Channel Speaker Selector
- 1x Brugermanual (dette dokument)
Produkt overview
Frontpanel
The front panel features four individual push-button controls for each speaker zone.
Billede: Forside view of the Monoprice SS-4 Speaker Selector, showing four 'ZONE' buttons labeled 1 through 4.
- ZONE 1-4 Buttons: Press to enable or disable the corresponding speaker zone.
Bagpanel
The rear panel provides all the necessary connections for your amplifier and speaker pairs.
Billede: Bagside view of the Monoprice SS-4 Speaker Selector, showing input terminals labeled 'FROM AMPLIFIER' and output terminals labeled 'ZONE 1 SPEAKERS' through 'ZONE 4 SPEAKERS'.
- FRA AMPLIFIER (L/R): Input terminals for connecting your amplifier eller modtager.
- ZONE 1-4 SPEAKERS (L/R): Output terminals for connecting up to four pairs of speakers.
Opsætning og installation
Follow these steps to properly connect your Monoprice SS-4 Speaker Selector to your audio system.
- Sluk: Sørg for din amplifier/receiver and all other audio components are powered off and unplugged from the wall outlet before making any connections.
- Forbinde Amplivligere: Tilslut højttalerudgangsterminalerne på din amplifier or receiver to the "FROM AMPLIFIER L/R" input terminals on the rear of the SS-4 Speaker Selector. Use high-quality 12-16 AWG speaker wire.
- Tilslut højttalere: Connect each pair of speakers to the corresponding "ZONE 1 SPEAKERS L/R" through "ZONE 4 SPEAKERS L/R" output terminals on the rear of the SS-4 Speaker Selector. Ensure correct polarity (+ to + and - to -) for all connections.
- Bekræft forbindelser: Double-check all speaker wire connections to ensure they are secure and that there are no stray wire strands that could cause a short circuit. The heavy-duty screw-type connectors are designed for secure connections.
- Tænd: Once all connections are verified, plug in and power on your amplifier/modtager.
Vigtig:
- The SS-4 features automatic impedance protection circuitry to maintain a safe load for your amplivligere.
- It supports a 5-ohm minimum amplifier impedance with four 4-ohm speakers selected, and a 6-ohm minimum with 8-ohm speakers.
- Isolated left/right circuit grounds provide a safe connection for amplifiers with floating grounds or bridged configurations.
Betjeningsvejledning
Using the Monoprice SS-4 Speaker Selector is straightforward.
- Select Speaker Zones: Press the "ZONE 1", "ZONE 2", "ZONE 3", or "ZONE 4" buttons on the front panel to turn the corresponding speaker pair on or off.
- Flere zoner: You can activate one or more speaker zones simultaneously. The impedance protection circuitry will automatically adjust to ensure a safe load for your amplivligere.
- Lydstyrkekontrol: Juster lydstyrken ved hjælp af din amplifier or receiver's volume control. The SS-4 Speaker Selector does not provide independent volume control for each zone.
Opretholdelse
The Monoprice SS-4 Speaker Selector requires minimal maintenance.
- Rensning: Brug en blød, tør klud til at rengøre enhedens yderside. Brug ikke flydende rengøringsmidler eller aerosoler.
- Forbindelser: Kontrollér regelmæssigt alle ledningsforbindelser for at sikre, at de forbliver fastgjorte.
- Ventilation: Ensure the unit has adequate ventilation and is not placed in an enclosed space that could lead to overheating.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen lyd fra højttalere. | Speaker zone not activated. | Press the corresponding ZONE button on the front panel. |
| Ingen lyd fra højttalere. | Forkert ledningsføring eller løse forbindelser. | Check all speaker wire connections for correct polarity and ensure they are secure. |
| Ingen lyd fra højttalere. | AmpFjernbetjening/modtager er ikke tændt, eller indgang er ikke valgt. | Sørg for din ampHvis højttaleren/modtageren er tændt, og den korrekte inputkilde er valgt. |
| Forvrænget lyd. | Overdrive amplivligere eller højttalere. | Skru ned for lydstyrken på din amplifier. Ensure speaker impedance is compatible. |
Specifikationer
- Model: 138157
- Kanaler: 4
- Impedance Protection: Automatisk
- Strømkapacitet: 100 watt RMS pr. kanal
- Minimum Amplifier Impedance (4-ohm speakers): 5 ohms (with four 4-ohm speakers selected)
- Minimum Amplifier Impedance (8-ohm speakers): 6 ohms (with 8-ohm speakers)
- Supported Speaker Wire Gauge: 12-16 AWG
- Forbindelser: Heavy-duty screw-type
- Farve: Sort
- Varens vægt: 3.14 ounce
Garanti
Monoprice provides a limited warranty for this product. For detailed warranty information, please refer to the official Monoprice website or contact customer support. The product's warranty description is listed as "1" in the product data, indicating a standard limited warranty.
Kundesupport
For technical support, troubleshooting assistance, or warranty inquiries, please visit the official Monoprice webwebsted eller kontakt deres kundeserviceafdeling.