MAX MXSA001 315MHz TPMS dæktryksensorer til Toyota instruktionsmanual

1. Introduktion

This instruction manual provides essential information for the proper installation, operation, and maintenance of your MAX MXSA001 315MHz Tire Pressure Monitoring System (TPMS) sensors. These sensors are designed as direct replacements for various Toyota models, ensuring accurate tire pressure monitoring for enhanced safety and vehicle performance. Please read this manual thoroughly before installation and retain it for future reference.

2. Sikkerhedsoplysninger

Professionel installation anbefales: Installation of TPMS sensors requires specialized tools and knowledge. It is highly recommended that these sensors be installed by a qualified technician.
Correct Torque: Ensure valve stem nuts are tightened to the specified torque (4 Nm or 35 in-lbs) to prevent air leaks and sensor damage.
Dækmontering: Exercise caution during tire mounting and demounting to avoid damaging the sensor.
Kompatibilitet: Verify that the sensors are compatible with your vehicle's make, model, and year before installation. Refer to the replacement OEM part numbers provided.
Batterilevetid: TPMS sensors contain non-replaceable batteries. The typical lifespan is 5-7 years, depending on usage.

3. Pakkens indhold

Hver pakke indeholder:

4 x MAX MXSA001 315MHz TPMS Sensors
4 x Silver Aluminum Valve Stems (pre-attached to sensors)

Four MAX MXSA001 TPMS sensors with silver aluminum valve stems, arranged on a white background.

Figur 3.1: Overview of four MAX MXSA001 TPMS sensors.

4. Opsætning og installation

Proper installation is crucial for the correct functioning of the TPMS. It is strongly recommended that installation be performed by a certified automotive technician.

4.1 Kontrol før installation

Confirm that the MXSA001 sensors are the correct replacement for your vehicle's OEM part numbers (e.g., 4260733021, 4260706011, 4260733011, 426070C020, 426070C010, 42607AD020, 4260704010).
Inspect each sensor for any visible damage before installation.

4.2 Montering af sensor

Fjern dækket fra hjulet.
Carefully remove the old TPMS sensor and valve stem.
Insert the new MAX MXSA001 sensor's valve stem through the valve hole from the inside of the rim.
Secure the valve stem nut from the outside, tightening it to 4 Nm (35 in-lbs). Spænd ikke for meget.
Ensure the sensor body is properly seated and does not interfere with the tire bead during mounting.
Monter dækket tilbage på hjulet, og pas på ikke at beskadige sensoren.
Pump dækket op til producentens anbefalede tryk.

Nærbillede view of a single MAX MXSA001 TPMS sensor, showing the black sensor body, silver valve stem, and printed specifications like 'Max.9Bar/130Psi' and '4Nm'.

Figure 4.2.1: Close-up of a single MXSA001 sensor.

Side view of a MAX MXSA001 TPMS sensor, highlighting the angle of the valve stem attachment to the sensor body.

Figur 4.2.2: Side view of the sensor and valve stem.

4.3 TPMS Relearn Procedure

After installing new TPMS sensors, your vehicle's TPMS control module must be reprogrammed or

Relaterede dokumenter - MXSA001

	MAX Sensor TPMS installationsvejledning og garantioplysninger (GEN 5) Detaljerede instruktioner til installation af MAX Sensor TPMS-sensorer (model MX005A GEN 5, MX005R GEN 5), inklusive programmering, montering, oppustning og garantioplysninger. FCC-kompatibel.
	MAX SENSOR MX-51 TPMS Diagnostic Tool Brugermanual og deroverview Omfattende guide til MAX SENSOR MX-51, et TPMS-diagnoseværktøj til test, programmering og genindlæring af dæktryksovervågningssystemer. Inkluderer opsætning, betjening og fejlfinding.
	MAX Sensor MXBLE02 TPMS-sensor installations- og garantivejledning Omfattende vejledning til installation af MAX Sensor MXBLE02 TPMS-sensoren, inklusive vigtige sikkerhedsforanstaltninger, garantioplysninger og FCC-overholdelsesoplysninger.
	MAX Sensor TPMS installations- og garantivejledning Denne vejledning indeholder instruktioner til installation af MAX Sensor TPMS-enheder (model MX005A, MX005R GEN 5A), der dækker komponentidentifikation, trinvis installation, garantioplysninger og FCC-overholdelsesoplysninger.
	Brugermanual til automatisk injektor - YZHIDIANF Teknisk support og garantioplysninger Officiel brugermanual til YZHIDIANF Auto Injector, der indeholder detaljer om teknisk support, garantioplysninger og kontaktoplysninger. Inkluderer fordele som 2 års garanti, gratis udskiftning og velfærdsplaner.
	TST 507 Series Wireless TPMS Installation Manual Installation guide for the TST 507 Series Wireless Tire Pressure and Temperature Monitoring System (TPMS). Covers setup, sensor programming, display configuration, alerts, troubleshooting, and specifications for vehicles and trailers.

Max Sensor MXSA001