Indledning
The ENERMAX Max Pro II series power supply is designed for the European market, offering low noise and efficient operation. This power supply achieves 88% peak efficiency, certified by 80 PLUS® 230V EU, and features a standby power consumption of less than 0.5 watts, complying with the latest EU eco-design regulations.
It incorporates a 120 mm high-pressure fan with patented Twister Bearing technology for quiet and effective cooling. The SafeGuard multiple safety system provides comprehensive protection against overcurrent, overvoltage, short circuit, undervoltage, overheat, and overpower, ensuring system stability and longevity. Max Pro II power supplies are built for continuous 24-hour operation at ambient temperatures up to 40°C.
Sikkerhedsforanstaltninger
- Always disconnect the power supply from the main power outlet before installation or maintenance.
- Åbn ikke strømforsyningsenheden. Høj lydstyrketages are present inside, which can be dangerous.
- Sørg for korrekt jordforbindelse af dit computersystem.
- Undgå at bruge strømforsyningen i miljøer med høj luftfugtighed eller ekstreme temperaturer.
- Keep the power supply away from liquids and excessive dust.
Opsætning og installation
Follow these steps to properly install your ENERMAX Max Pro II power supply:
- Pak strømforsyningen ud: Tag forsigtigt strømforsyningen ud af emballagen, og undersøg den for tegn på skader.
- Monter strømforsyningen: Secure the power supply into the designated bay in your computer case using the provided screws. Ensure the fan is oriented correctly for optimal airflow (typically facing downwards or towards the inside of the case, depending on case design).
- Tilslut hovedstrømkabler:
- Connect the 24-pin ATX main power connector to your motherboard.
- Connect the 4+4-pin or 8-pin EPS12V CPU power connector to your motherboard.
- Tilslut perifere kabler: Utilize the flat cables for easy installation and clean cable management. Connect SATA power connectors to your storage drives (HDDs, SSDs) and optical drives. Connect 6+2-pin PCIe power connectors to your graphics card(s) as required.
- Bekræft forbindelser: Double-check all connections to ensure they are firmly seated. Loose connections can cause system instability or damage.
- Tilslut til stikkontakt: Once all internal connections are secure, connect the AC power cord to the power supply and then to a grounded wall outlet.
Figur 1: Forside view of the ENERMAX Max Pro II 600W Power Supply, showing the fan grille and branding.
Figur 2: Side view of the power supply, illustrating the flat cable design for improved cable management.
Betjeningsvejledning
The ENERMAX Max Pro II is designed for reliable and efficient operation:
- Tænd: After installation, turn on your computer system. The power supply will automatically begin operation.
- Effektivitet: The unit operates with up to 88% efficiency at 230VAC between 20% and 100% load, reducing energy waste and heat generation.
- Kølesystem: The integrated 120mm fan with patented Twister Bearing technology and Smart Airflow Control (SAC) ensures quiet operation, maintaining fan noise at approximately 14dB(A) up to 40% system load.
- Kontinuerlig drift: This power supply is engineered for 24-hour continuous operation at an ambient temperature of 40°C, providing consistent performance for demanding systems.
- Energibesparelse: Supports Intel® ATX12V v2.3 and the C6/C7 energy-saving functions of Intel® processors (first introduced with the Haswell™ generation), contributing to lower power consumption in idle states.
Figur 3: Top-down view of the 120mm fan, highlighting the Twister Bearing technology for quiet and efficient cooling.
Opretholdelse
Korrekt vedligeholdelse sikrer strømforsyningens levetid og optimale ydeevne:
- Fjernelse af støv: Periodically clean the exterior of the power supply and the fan grille to prevent dust buildup, which can impede airflow and lead to overheating. Use compressed air or a soft brush. Ensure the power supply is disconnected from the mains before cleaning.
- Sørg for korrekt luftstrøm: Make sure that the air vents of your computer case are not obstructed. Good airflow within the case is crucial for the power supply's cooling system.
- Miljøforhold: Operate the power supply within recommended temperature and humidity ranges. Avoid placing your computer in direct sunlight or near heat sources.
Fejlfinding
If you encounter issues with your ENERMAX Max Pro II power supply, consider the following troubleshooting steps:
- Ingen strøm:
- Kontroller, om netledningen er korrekt tilsluttet både strømforsyningen og stikkontakten.
- Ensure the power switch on the back of the power supply is in the 'ON' position.
- Kontroller, at stikkontakten fungerer ved at tilslutte en anden enhed.
- Confirm all internal power connectors (24-pin ATX, EPS12V, PCIe) are correctly and firmly seated.
- Systemustabilitet/Tilfældige nedlukninger:
- This could indicate an overloaded power supply or a component issue. Ensure your system's power requirements do not exceed the PSU's capacity.
- The SafeGuard multiple safety system (OVP, UVP, OPP, SCP, OCP, OTP) will protect the system from damage in case of electrical anomalies. If the PSU shuts down, it might be due to one of these protections activating.
- Kontroller, at der er tilstrækkelig ventilation i pc-kabinettet for at forhindre overophedning.
- Usædvanlige lyde: While the fan is designed for quiet operation, excessive or unusual noises might indicate a problem. Ensure no cables are obstructing the fan blades. If the noise persists, contact support.
Specifikationer
| Feature | Værdi |
|---|---|
| Mærke | Enermax |
| Modelnavn | MAXPRO II |
| Modelnummer | EMP600AGT-C |
| Udgangseffekt | 600 watt |
| Formfaktor | ATX |
| Connector Type | ATX |
| Afkølingsmetode | Luft |
| Varedimensioner (L x B x H) | 15 x 14 x 8.6 centimeter |
| Varens vægt | 1.6 kilo |
| Farve | Sort |
| Kompatible enheder | PC |
| Effektivitetscertificering | 80 PLUS 230V EU (up to 88% peak efficiency) |
| Sikkerhedsfunktioner | SafeGuard (OVP, UVP, OPP, SCP, OCP, OTP) |
Garanti og support
Garanti: The ENERMAX Max Pro II power supply typically comes with a 3-year manufacturer's warranty. Please refer to your purchase documentation for specific terms and conditions.
Kundesupport: For technical assistance, warranty claims, or further inquiries, please visit the official Enermax website or contact their customer support department. Ensure you have your product model number (EMP600AGT-C) and proof of purchase available when contacting support.
Videoressourcer
No official product videos from the seller were found in the provided data. For additional visual guides or product information, please check the official Enermax webwebsted eller autoriserede forhandlere.