Walfront STC-200
Walfront Digital Temperature Controller STC-200 Instruction Manual
Model: STC-200
1. Introduktion og overview
The Walfront Digital Temperature Controller STC-200 is a versatile microcomputer-controlled thermostat designed for precise temperature management in various applications. It supports both refrigeration and heating modes, making it suitable for homebrewing, fermenters, fridges, seafood machines, water heaters, and other equipment requiring accurate temperature regulation. This manual provides essential information for the safe and effective operation of your STC-200 controller.
2. Produktfunktioner
- Programmerbare parametre: User and administrator parameters are set separately for convenient operation.
- Kompressorforsinkelsesbeskyttelse: Features adjustable compressor delay to protect connected equipment.
- Digital Temperature Control Alarm: Includes alarm output for temperature deviations.
- Klar digital skærm: Utilizes a digital tube display for clear and fast data reading.
- Refrigeration & Heating Modes: Equipped with mode conversion functions for cooling and heating.
- Fejlalarm: Alerts users to sensor failures.
- Temperaturkorrektion: Allows for calibration of temperature readings.
Figur 2.1: Forside view of the STC-200 Digital Temperature Controller, showing the digital display, 'Set' button, power button, and up/down arrows. The display shows "8.8." indicating its digital tube nature. Text overlay highlights key features like refrigeration/heating modes and user-friendly parameter settings.
3. Tekniske specifikationer
| Parameter | Værdi |
|---|---|
| Tilstand | Splinterny |
| Materiale | ABS (Acrylonitril Butadien Styren) |
| Monteringshulstørrelse | Approx. 70.5 x 28.5 mm / 2.8 x 1.1 in |
| Driftsmiljø Temperatur | -30 °C ~ 80 °C |
| Relativ luftfugtighed | No more than 85% (non-condensable) |
| Strømforsyning Voltage | 220VAC ± 10 % |
| Strømforbrug | Mindre end 5W |
| Temperaturområde | -40 °C ~ 99 °C |
| Temperaturkontrolområde | -40 °C ~ 70 °C |
| Opløsning | 1 °C |
| Relækapacitet | 10A/250VAC/30VDC |
| Nettovægt | Ca. 161 g / 5.7 oz |
Figur 3.1: Side view of the STC-200 Digital Temperature Controller illustrating its dimensions: approximately 70.5mm (2.8 inches) in height and 28.5mm (1.1 inches) in depth for the mounting hole.
4. Opsætning og installation
4.1 Montering
The STC-200 is designed for panel mounting. Ensure the mounting hole dimensions (70.5 x 28.5 mm) are accurately cut. Secure the controller using the integrated clips on the sides.
Figur 4.1: Side view of the STC-200 controller, highlighting the orange mounting clips that secure the unit into a panel cutout.
4.2 Ledningsdiagram og tilslutninger
Forsigtighed: This unit operates on 220VAC. Ensure all wiring is performed by a qualified professional and that the power supply is disconnected before making any connections. Distinguish the interface of the relay, sensor, and power supply wires. Keep sensor wires and power supply wires at a proper distance to avoid interference.
- Terminalerne 1, 2, 3: Load connection (10A/220VAC/30VDC).
- Terminal 4, 5: Temperature sensor connection.
- Terminal 6, 7: 220VAC Power Supply.
Figur 4.2: Bagside view of the STC-200 controller, displaying the wiring diagram. It clearly labels terminals for load (1, 2, 3), temperature sensor (4, 5), and 220VAC power supply (6, 7). A caution note emphasizes proper wiring and voltage verifikation.
Figur 4.3: Nærbillede view of the rear terminal blocks on the STC-200 controller, showing the seven screw terminals for electrical connections.
5. Betjeningsvejledning
5.1 Grundlæggende betjening
- Tænd/sluk: Tryk på tænd / sluk-knappen (⑂) for at tænde eller slukke for enheden.
- View Aktuel temperatur: The main display shows the current measured temperature.
- Indstil temperatur: Press the 'Set' button to enter temperature setting mode. Use the Up (▲) og ned (▼) buttons to adjust the desired temperature. Press 'Set' again to confirm and exit.
5.2 Parameter Settings (F-Codes)
To access advanced parameters (F-codes), press and hold the 'Set' button for approximately 3 seconds until 'F0' appears. Use the Up (▲) og ned (▼) buttons to navigate through the F-codes (F0, F1, F2, F3, F4, F5). Press 'Set' to view or modify the value of a selected F-code. Press 'Set' again to save changes and move to the next parameter, or press the power button to exit without saving.
- F0: Temperature Control Mode (0=Refrigeration, 1=Heating)
- F1: Temperature Hysteresis (Differential)
- F2: Alarmgrænse for høj temperatur
- F3: Lav temperatur alarmgrænse
- F4: Compressor Delay Time (in minutes)
- F5: Temperature Correction Value
5.3 Visual Guide: Setting Parameters
Video 5.1: This video demonstrates how to access and adjust the F-code parameters on the Walfront STC-200 Digital Temperature Controller. It shows the sequence of button presses to enter the setting menu, navigate through F0 to F5, and modify their values, such as setting the temperature control mode or compressor delay.
6. Vedligeholdelse
- Rensning: Regularly wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Sensorpleje: Ensure the temperature sensor is clean and free from debris. Avoid bending or damaging the sensor cable.
- Miljøforhold: Operate the controller within the specified environmental temperature and humidity ranges to ensure longevity.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Skærmen er tom | No power supply; Incorrect wiring; Unit failure. | Check power connection (220VAC). Verify wiring according to diagram. If problem persists, contact support. |
| "E1" or "HHH" error on display | Sensor fault (open circuit, short circuit); Temperature exceeds range. | Check sensor connection and integrity. Ensure operating temperature is within -40°C to 99°C. Replace sensor if damaged. |
| Temperaturaflæsningen er unøjagtig | Sensor placement; Need for calibration. | Relocate sensor to a more representative area. Use F5 parameter to apply temperature correction. |
| Controller not switching load | Incorrect temperature setting; Relay failure; Load wiring issue. | Verify set temperature and hysteresis. Check load wiring (Terminals 1, 2, 3). Ensure F0 mode is correctly set (Refrigeration/Heating). |
8. Garanti og support
Walfront products are manufactured to high quality standards. For warranty information, technical support, or service inquiries, please refer to the contact details provided with your purchase or visit the official Walfront webwebsted. Gem venligst din købsbevis til garantikrav.
For further assistance, you may visit the Walfront Store on Amazon: Walfront Store
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.