FLYSKY FS-i6X 10CH 2.4GHz AFHDS2A RC Transmitter Controller User Manual

1. Introduktion

This manual provides detailed instructions for the setup, operation, and maintenance of your FLYSKY FS-i6X 10CH 2.4GHz AFHDS2A RC Transmitter Controller and FS-iA10B Receiver. This system is designed for various RC models including fixed-wing aircraft, gliders, helicopters, and quadcopters. The FS-i6X system utilizes multi-channel hopping frequency technology (AFHDS 2A) for reduced interference and features a high-efficiency omni-directional gain antenna for a strong, reliable connection. It also boasts low power consumption, extending battery life, and supports bidirectional communication for telemetry data.

2. Sikkerhedsoplysninger

Always operate your RC equipment responsibly and safely. Failure to do so may result in injury or damage to property. Please observe the following safety guidelines:

• Sørg for, at alle forbindelser er sikre før brug.
• Do not operate the transmitter with low battery voltage.
• Hold senderen og modtageren væk fra fugt og ekstreme temperaturer.
• Tænd altid først senderen, derefter modtageren. Når du slukker, skal du først slukke modtageren og derefter senderen.
• Efterse regelmæssigt alle komponenter for tegn på slid eller beskadigelse.
• Brug fjernstyrede modeller i åbne områder, væk fra mennesker, dyr og forhindringer.

3. Pakkens indhold

Bekræft, at alle nedenstående varer er inkluderet i din pakke:

• 1X Flysky FS-i6X Transmitter
• 1X FS-iA10B Receiver
• 1X Bind plug
• 1X Upgrade Cable

Bemærk: Batterier er ikke inkluderet og skal købes separat.

4. Produktet er slutview

The FLYSKY FS-i6X is a 10-channel 2.4GHz RC transmitter designed for precise control of various RC models. It features a clear STNTransflective LCD display for easy navigation and setup.

Figure 4.1: FLYSKY FS-i6X Transmitter and FS-iA10B Receiver included in the package.

4.1 FS-i6X Transmitter

The FS-i6X transmitter features dual antennas for enhanced signal reliability and a robust design suitable for various RC applications. It operates on 6V DC using 4 AA batteries.

Figur 4.2: Forside view of the FS-i6X Transmitter, showing the sticks, switches, and LCD screen.

Figur 4.3: Nærbillede view of the FS-i6X Transmitter's switches, knobs, and stick gimbals.

The transmitter is equipped with a PS/2 port for DSC (Direct Servo Control) and can be connected to a PC via an upgrade cable for simulator practice.

Figur 4.4: Bagside view of the FS-i6X Transmitter, highlighting the Trainer Jack/Update Interface and power input.

The FS-i6X is versatile and compatible with various RC models, including multirotors, helicopters, fixed-wing aircraft, RC cars, RC boats, and even robots.

Figure 4.5: Illustration of different RC model types compatible with the FS-i6X transmitter.

The LCD screen provides essential information and allows for digital configuration. It supports displaying information in English or Chinese characters.

Figure 4.6: Close-up of the FS-i6X's backlit LCD screen, showing operational data.

4.2 FS-iA10B Receiver

The FS-iA10B is a 10-channel 2.4GHz receiver designed to work seamlessly with the FS-i6X transmitter. It features dual antennas for robust signal reception and supports i-BUS and data acquisition.

Figur 4.7: Øverst view of the FS-iA10B Receiver, showing channel ports and antenna connections.

Figur 4.8: Detaljeret view of the FS-iA10B Receiver's servo and i-BUS ports.

5. Opsætning

5.1 Batteriinstallation

The FS-i6X transmitter requires 4 x 1.5V AA batteries (not included). Open the battery compartment on the back of the transmitter and insert the batteries, ensuring correct polarity. Close the compartment securely.

5.2 Binding (Transmitter to Receiver)

The FS-i6X transmitter and FS-iA10B receiver are typically pre-bound from the factory. You should not need to bind them again upon receipt. However, if re-binding is necessary, follow these steps:

1. Sørg for, at senderen er slukket.
2. Connect the bind plug to the B/VCC port on the FS-iA10B receiver.
3. Apply power to the receiver (e.g., via an ESC or external battery). The receiver's LED should flash rapidly.
4. While holding down the 'BIND KEY' button on the FS-i6X transmitter, power on the transmitter.
5. The transmitter's screen should indicate binding progress. Once bound, the receiver's LED will become solid.
6. Release the 'BIND KEY' button and power off both the transmitter and receiver.
7. Fjern bindestikket fra modtageren.
8. Power on the transmitter first, then the receiver. The receiver's LED should be solid, indicating a successful bind.

5.3 Tilslutning af modtageren

Connect your servos, ESCs, and other components to the appropriate channels on the FS-iA10B receiver. Refer to the markings on the receiver for channel assignments (CH1-CH10, i-BUS, SENS, B/VCC).

5.4 How to Setup 10 Channels

The FS-i6X transmitter defaults to 6 channels. To enable all 10 channels, follow these steps:

1. Tryk længe på OK button for 2 seconds to enter the main menu setting.
2. Naviger til og vælg Systemopsætning at komme ind.
3. Scroll down to the last item, Aux SWitches (auxiliary switch setting), and enter.
4. Set switches SwA, B, C, D til On for at aktivere dem.
5. Change the channel assignment from Ch6 til Ch10.
6. Tryk længe på CANCH key to automatically save the settings and exit the menu.

6. Betjening

6.1 Grundlæggende betjening

To power on the transmitter, press and hold the power button until the LCD screen illuminates. To power off, press and hold the power button again until the screen turns off. Always ensure your model's power is off before powering off the transmitter.

6.2 Mode-2 Configuration

This FS-i6X transmitter is configured for Mode-2, which means the left stick controls throttle and rudder, while the right stick controls aileron and elevator. This is a common configuration for RC aircraft.

6.3 Simulator Connection

The FS-i6X supports connection to PC-based flight simulators. Use the provided upgrade cable to connect the transmitter's PS/2 port to your computer's USB port. This allows you to practice flying skills without risking your physical model. Note that simulator software must be purchased separately.

7. Vedligeholdelse

• Hold sender og modtager rene og fri for støv og snavs. Brug en blød, tør klud til rengøring.
• Store the equipment in a cool, dry place, away from direct sunlight and extreme temperatures.
• Fjern batterierne fra senderen, hvis den ikke skal bruges i længere tid, for at forhindre lækage.
• Regularly check all cables and connectors for wear or damage.

8. Fejlfinding

• Ingen strøm: Kontroller batteriinstallationen, og sørg for, at batterierne har tilstrækkelig opladning.
• Ingen kontrol/intermitterende kontrol: Verify that the transmitter and receiver are properly bound. Check all connections between the receiver and your model's components. Ensure there is no significant interference in your operating area.
• Receiver LED Flashing: This usually indicates the receiver is not bound to the transmitter or has lost signal. Re-bind the receiver to the transmitter if necessary.
• Visningsproblemer: If the LCD display is dim or unreadable, check battery voltage.

9. Specifikationer

10. Garanti og support

For warranty information, technical support, or service inquiries, please refer to the official FLYSKY webwebstedet eller kontakt deres kundeservice direkte. Gem din købskvittering som købsbevis i tilfælde af garantikrav.