Indledning
The Pro-Ject T1 Phono SB Turntable is a high-fidelity, European-built belt-drive turntable designed to deliver exceptional audio performance. This model features an integrated phono preamplifier and electronic speed control, ensuring a seamless and high-quality listening experience for your vinyl collection.
Key features include a factory-pre-set tonearm and cartridge for easy installation, an 8mm thick bead-blasted glass platter for stable playback, and precise electronic selection for both 33 1/3 and 45 RPM speeds. The built-in phono preamp is bypassable, offering flexibility for connection to various audio systems.
Billede: Et nærbillede view of the Pro-Ject T1's 8mm thick bead-blasted glass platter.
Hvad er der i æsken
Sørg for, at alle følgende komponenter er til stede ved udpakning:
- Pro-Ject T1 Phono SB Turntable
- Støvdæksel
- Ortofon OM5e Phono Cartridge (pre-mounted)
- Connect-It E højkvalitets lydkabel
- Værktøjer til opsætning og justering
- 15 V DC strømforsyning
Image: The Pro-Ject T1 Phono SB Turntable in Piano Black, showcasing its sleek design and glass platter.
Opsætning
The T1 Phono SB turntable is designed for easy setup, with the tonearm and Ortofon OM5e cartridge pre-installed and adjusted at the factory. Follow these steps to get started:
- Placering: Place the turntable on a stable, level surface away from direct sunlight, heat sources, and strong vibrations.
- Montering af støvdæksel: Carefully attach the dust cover hinges to the designated slots on the turntable plinth.
- Installation af tallerken: Place the glass platter onto the sub-platter spindle. Ensure it sits flush and rotates freely.
- Montering af bælte: Gently stretch the drive belt around the sub-platter and the motor pulley. For 33 1/3 RPM, use the smaller diameter of the pulley. For 45 RPM, use the larger diameter.
- Lydforbindelse: Connect the supplied Connect-It E audio cable from the turntable's output to your amplifier's phono input (if using the internal preamp) or a line-level input (if bypassing the internal preamp and using an external phono stage). Ensure the ground wire is connected to your ampstrømforsyningens jordterminal for at minimere brummen.
- Strømtilslutning: Connect the 15V DC power supply to the turntable's power input and then plug it into a wall outlet.
Image: The Pro-Ject T1 Phono SB Turntable with its protective dust cover open, ready for operation.
Betjeningsvejledning
Operating your Pro-Ject T1 Phono SB turntable is straightforward:
- Tænd: Locate the power button, typically on the underside or side of the plinth. Press it to turn on the turntable. The platter will begin to rotate.
- Hastighedsvalg: Use the electronic speed control button to switch between 33 1/3 RPM and 45 RPM. The indicator light will confirm the selected speed.
- Afspilning af en plade:
- Læg en plade på fadet.
- Løft tonearmen ved hjælp af cue-håndtaget.
- Placer forsigtigt tonearmen over den ønskede startrille på pladen.
- Sænk forsigtigt cue-håndtaget, så pennen kan synke ned på pladen.
- Stop af afspilning:
- Løft tonearmen ved hjælp af cue-håndtaget.
- Sæt tonearmen tilbage på plads, og fastgør den med tonearmklipsen.
- Press the power button to turn off the turntable.
- Phono Preamp Bypass: The T1 Phono SB has a built-in phono preamp. If you wish to use an external phono stage, consult your turntable's specific model documentation for instructions on how to bypass the internal preamp. This usually involves a switch on the rear panel.
Billede: En detaljeret view of the T1's tonearm and the pre-mounted Ortofon OM5e phono cartridge.
Opretholdelse
Regelmæssig vedligeholdelse sikrer din pladespillers levetid og optimale ydeevne:
- Cleaning the Platter and Plinth: Use a soft, lint-free cloth to gently wipe the glass platter and the turntable plinth. Avoid abrasive cleaners.
- Rengøring af pennen: Periodically clean the stylus using a dedicated stylus brush, brushing gently from back to front.
- Støvdæksel: Keep the dust cover closed when the turntable is not in use to protect it from dust and debris. Clean the dust cover with a soft, damp klæde.
- Drivrem: Inspect the drive belt periodically for wear or stretching. Replace if necessary to maintain accurate speed.
- Undgå væsker: Do not spill any liquids on the turntable. If a spill occurs, immediately disconnect power and clean thoroughly.
Fejlfinding
If you encounter issues with your turntable, refer to the following common solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| No power/Platter not spinning | Power cable not connected, power outlet faulty, power button off. | Check power connections, try a different outlet, ensure power button is pressed. |
| Ingen lyd eller lav lydstyrke | Audio cables incorrect, amplifier input wrong, phono preamp bypass switch set incorrectly. | Ensure audio cables are securely connected to the correct inputs (Phono or Line), verify phono preamp indstilling. |
| Brummende lyd | Ground wire not connected, proximity to other electronics. | Connect the ground wire to your amplifier. Move turntable away from other electronic devices. |
| Forkert afspilningshastighed | Wrong speed selected, drive belt issue. | Verify speed setting (33 1/3 or 45 RPM). Check if the drive belt is properly seated and not worn. |
If the issue persists after attempting these solutions, please contact customer support or refer to the warranty information for service options.
Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Projekt |
| Modelnavn | T1 Phono SB |
| Maksimal rotationshastighed | 45 RPM |
| Speciel funktion | Built-In Preamp, Belt Drive |
| Materiale | Plastic (Plinth), Glass (Platter) |
| Varens vægt | 7.14 kilo |
| Farve | Klaver sort |
| Kompatible enheder | Desktop, Headphone, Laptop, MP3 Player, Personal Computer, Smartphone, Speaker, Tablet |
| Cykler | AC motor |
| Signalformat | Analog |
| Voltage | 15 volt (DC) |
| Strømkilde | Elektrisk med ledning |
| Signal-støjforhold | 75 dB |
| Forbindelsesteknologi | Kablet |
| Varedimensioner (L x B x H) | 13.19 cm L x 16.34 cm B x 3.94 cm H |
| Fabrikant | Pro-Ject lydsystemer |
| UPC | 844682009681 |
| GTIN | 00844682009681 |
Garanti og support
The Pro-Ject T1 Phono SB Turntable comes with a 2 års garanti covering parts and labor. The included Ortofon OM5e Phono Cartridge has a separate 90 dages garanti.
For technical support, service, or warranty claims, please contact your authorized Pro-Ject dealer or visit the official Pro-Ject Audio Systems webwebstedet for kontaktoplysninger. Gem venligst dit købsbevis for at validere garantien.