Godox TT350N Speedlite Flash for Nikon DSLR Cameras User Manual

1. Introduktion

Tak for købetasing the Godox TT350N Speedlite Flash. This compact and versatile flash unit is designed for Nikon DSLR cameras, offering full TTL functionality, high-speed sync, and a built-in 2.4G wireless X system. This manual provides detailed instructions for proper operation and maintenance to ensure optimal performance.

2. Sikkerhedsoplysninger

• Hold altid dette produkt tørt. Må ikke bruges i regn eller damp forhold.
• Må ikke skilles ad. Hvis reparationer bliver nødvendige, skal dette produkt sendes til et autoriseret vedligeholdelsescenter.
• Opbevares utilgængeligt for børn.
• Brug ikke blitzenheden i nærheden af ​​brandfarlige gasser, kemikalier eller andre materialer.
• Do not touch the flash head immediately after use, as it may be hot.
• Use only AA batteries as specified. Do not mix new and old batteries or different types of batteries.

3. Produktet er slutview

3.1 Nøglefunktioner

• Full TTL Functionality: Supports HSS (up to 1/8000s), FEC, front and rear curtain sync, multi-flash, and manual flash.
• Dot-Matrix LCD: Provides clear and simple operation with an intuitive display.
• Kraftige funktioner: Includes TTL autoflash, 1/8000 high-speed synchronization, flash exposure compensation, flash exposure lock, and modeling flash.
• Wireless Grouping System: Features a 2.4G wireless system with up to 5 groups and 32 channels to meet various shooting requirements.
• Overophedningsbeskyttelse: Designed with protection against overheating for extended use.
• Effektiv ydeevne: Guide Number (GN) of 36 (m ISO 100, @ 105mm), 22 power outputs (1/1-1/128). Recycling time between 0.1 and 2.2 seconds, providing approximately 210 full power flashes with 2500mA Ni-MH batteries.
• Zoom funktion: Automatic and manual zoom from 24mm to 105mm.
• Personal Function Settings (C.Fn): Customizable settings for personalized operation.
• Bred kompatibilitet: Can act as a master unit to control other Godox slave units (AD600, AD600M, AD360II-C, AD360II-N, V860IIN, V850II, TT685N, TT600) or as a slave unit triggered by Godox master units (X1T-N, V860IIN, V850II, TT685N, TT600).

3.2 Pakkens indhold

• 1 x Godox TT350N Flash Unit
• 1 x Mini-stativ
• 1 x beskyttelsesetui
• 1 x Color Filter
• 1 x brugermanual
• 1 x VFOTO Lens Cleaning Cloth

Image: The Godox TT350N flash unit, mini stand, protective case, color filter, user manual, and lens cleaning cloth are included in the package.

3.3 Navne på dele og funktioner

Image: Detailed diagram showing the various parts of the Godox TT350N flash and their corresponding functions.

1. Zoom-valgknap
2. Knap til valg af tilstand
3. Custom Function Setting Button (reusable button, long press for 2 seconds)
4. Testknap/blitz klar-indikator
5. LCD-panel
6. Højhastighedssynkroniseringsknap
7. S1/S2 Optisk slaveudløserknap (i ikke-trådløs tilstand)
8. Gruppe-/kanalknap (genanvendelig knap, i trådløs tilstand)
9. Strømafbryder
10. Lås Ring
11. Trådløs valgknap (genanvendelig knap, tryk længe i 2 sekunder)
12. hotshoe
13. Indstil knap
14. Vælg Ring op
15. Batterirum
16. Optisk kontrolsensor
17. Fokushjælpelys
18. Flash hoved
19. Catchlight panel
20. Indbygget bred panel

4. Opsætning

4.1 Batteriinstallation

The Godox TT350N uses two AA batteries. Ni-MH batteries are recommended for optimal performance and recycling time. Alkaline batteries (LR6) can also be used.

1. Åbn batteridækslet, der er placeret på siden af ​​blitzenheden.
2. Isæt to AA-batterier i henhold til polaritetsindikatorerne (+/-) inde i batterirummet.
3. Luk batterirummets dæksel forsvarligt.

4.2 Montering på kamera

To mount the flash unit onto your camera's hotshoe:

1. Loosen the lock ring on the flash unit by turning it counter-clockwise.
2. Slide the flash's hotshoe fully into your camera's hotshoe mount.
3. Tighten the lock ring by turning it clockwise until the flash is securely attached to the camera.

Image: The Godox TT350N flash unit showing its hotshoe for mounting onto a camera.

4.3 Tænd/sluk

• To power on, slide the Power Switch to the 'ON' position. The flash will begin charging, and the red flash ready indicator will light up when ready.
• To power off, slide the Power Switch to the 'OFF' position.

5. Driftstilstande

The TT350N offers various flash modes to suit different shooting scenarios. Press the MODE knappen for at gennemgå de tilgængelige tilstande.

5.1 TTL autoflash-tilstand

In TTL mode, the flash output is automatically adjusted by the camera to achieve correct exposure. This mode is ideal for quick shooting and changing light conditions.

• Tryk på MODE button until 'TTL' is displayed on the LCD panel.
• The flash will automatically adjust its output based on the camera's metering.

5.2 Manuel blitztilstand (M)

Manual mode allows you to set the flash output power manually from 1/1 (full power) to 1/128 in 1/3 stop increments. This provides precise control over lighting.

• Tryk på MODE button until 'M' is displayed.
• Drej på Vælg Ring op to adjust the flash output power.

5.3 Multi Flash Mode (Multi)

Multi flash mode (stroboscopic flash) fires a series of rapid flashes during a single exposure, creating multiple images of a moving subject in one frame.

• Tryk på MODE button until 'Multi' is displayed.
• Brug Vælg Ring op og SÆT button to adjust the flash frequency (Hz), number of flashes, and flash output.

5.4 Højhastighedssynkronisering (HSS)

High-Speed Sync allows the flash to synchronize with all camera shutter speeds, up to 1/8000s. This is useful for shooting with wide apertures in bright conditions or freezing fast motion.

• Tryk på SYNC button to activate HSS. The HSS icon will appear on the LCD.

5.5 First/Second Curtain Sync

First curtain sync fires the flash at the beginning of the exposure. Second curtain sync fires the flash just before the shutter closes, creating a trail of light behind moving subjects.

• These settings are typically controlled via your camera's flash menu. Refer to your camera's manual for specific instructions.

5.6 Flasheksponeringskompensation (FEC)

FEC allows you to fine-tune the flash output in TTL mode, making the flash brighter or darker by up to ±3 stops in 1/3 stop increments.

• In TTL mode, press the SÆT button. The FEC value will blink.
• Drej på Vælg Ring op to adjust the FEC value.
• Tryk på SÆT knappen igen for at bekræfte.

5.7 Modeling Flash

The modeling flash fires a brief burst of light to help you preview the lighting effect before taking the actual shot.

• Press the camera's depth-of-field preview button (if available) to activate the modeling flash.

6. Wireless Flash Function

The TT350N supports both 2.4G wireless transmission and optical transmission for off-camera flash control.

6.1 2.4G Wireless Transmission (Master/Slave)

The built-in Godox 2.4G wireless X system allows the TT350N to function as a master or slave unit, controlling or being controlled by other compatible Godox flashes and triggers.

Image: Illustration of the TT350N operating as both a master and slave unit within the Godox 2.4G wireless system.

• Hovedenhed: The TT350N can control other Godox slave units such as AD600, AD600M, AD360II-C, AD360II-N, V860IIN, V850II, TT685N, and TT600.
• Slaveenhed: The TT350N can be controlled by Godox master units like X1T-N, V860IIN, V850II, TT685N, and TT600.
• To activate wireless mode, long press the GR/CH button (Wireless Selection Button) for 2 seconds.
• Brug GR/CH knap og Vælg Ring op to set the group (A, B, C) and channel (1-16).
• Sørg for, at alle enheder er indstillet til den samme kanal og gruppe for at sikre korrekt kommunikation.

6.2 Optical Transmission (S1/S2 Slave)

The TT350N can also function as an optical slave, triggered by another flash unit's light pulse.

• S1 tilstand: The flash will fire in response to the first flash from a master flash. This mode is suitable for manual flash environments.
• S2 tilstand: The flash will ignore the pre-flash from a master TTL flash and fire in response to the second flash. This mode is suitable for TTL master flashes.
• To activate S1 or S2 mode, press the SLAVE button (S1/S2 Optic Slave Triggering Selection Button) until 'S1' or 'S2' is displayed.

7. C.Fn Custom Functions

The TT350N features customizable functions (C.Fn) that allow you to tailor the flash's behavior to your preferences.

• Tryk længe på C.Fn button for 2 seconds to enter the custom function settings menu.
• Brug Vælg Ring op to navigate through the available functions.
• Tryk på SÆT button to select a function and then use the Vælg Ring op at ændre dens værdi.
• Tryk på SÆT button again to confirm the change.
• Tryk længe på C.Fn button again to exit the custom function settings.

8. Vedligeholdelse

• Clean the flash unit regularly with a soft, dry cloth. Avoid using solvents or harsh chemicals.
• Remove batteries when the flash is not in use for an extended period to prevent leakage.
• Opbevar blitzen et køligt, tørt sted, væk fra direkte sollys og ekstreme temperaturer.
• Undgå kraftige stød eller at enheden tabes.

9. Fejlfinding

• Blitzen går ikke af: Check battery level, ensure flash is securely mounted, verify camera flash settings, and confirm flash is powered on and ready.
• Flash output is too dark/bright: Adjust FEC (Flash Exposure Compensation) in TTL mode or manual power output in M mode. Check camera ISO and aperture settings.
• Problemer med trådløs udløsning: Ensure master and slave units are on the same channel and group. Check distance and line of sight for optical triggering. Verify battery levels in all units.
• Flash head does not rotate/tilt smoothly: Do not force movement. If resistance is felt, check for obstructions or contact customer support.

10. Specifikationer

11. Garanti og support

Godox products are manufactured to high standards and are guaranteed against manufacturing defects. For warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or visit the official Godox webwebsted. Gem venligst din købsbevis til garantikrav.