ARREGUI 51300-S3B Elektronisk Pengeskab Brugermanual

1. Introduktion

This manual provides comprehensive instructions for the installation, operation, and maintenance of your ARREGUI 51300-S3B Electronic Safe. Please read these instructions carefully before using the safe to ensure proper function and security.

2. Sikkerhedsoplysninger

• Opbevar ikke nødnøglerne inde i pengeskabet. Opbevar dem et sikkert, separat sted.
• Sørg for, at pengeskabet er sikkert monteret for at forhindre uautoriseret fjernelse.
• Udskift batterierne med det samme, når indikatoren for lavt batteri vises, for at undgå at blive låst ude.
• Hold pengeskabet væk fra overdreven fugtighed eller ekstreme temperaturer.
• Forsøg ikke at åbne pengeskabet med magt, hvis den elektroniske lås ikke fungerer korrekt. Brug nødnøglen.

3. Pakkens indhold

Bekræft at alle komponenter er til stede i pakken:

• ARREGUI 51300-S3B Electronic Safe
• Nødnøgler (2)
• AA-batterier (4)
• Monteringsudstyr (skruer, ankre)
• Brugervejledning (dette dokument)

4. Opsætning

4.1. Batteriinstallation

1. Open the safe door using the emergency key. Insert the key into the keyhole, turn it clockwise, and rotate the handle to open.
2. Find batterirummet på indersiden af ​​​​døren til pengeskabet.
3. Isæt de fire AA-batterier, og sørg for at polerne vender korrekt (+/-).
4. Luk batterirummets dæksel.
5. Test the electronic lock by entering the default code (usually "1234" or "123456") and pressing "E" or "#". The display should show "OPEN" and the handle can be turned.

Figur 1: Forside view of the ARREGUI 51300-S3B Electronic Safe, showing the keypad and display. This image illustrates the safe in a closed position, ready for use.

4.2. Montering af pengeskabet

For optimal security, it is recommended to securely mount the safe to a wall or floor.

1. Vælg et passende sted, og sørg for, at det er en solid overflade, der kan bære pengeskabets vægt.
2. Åbn lågen til pengeskabet, og find de forborede monteringshuller på bagsiden eller bundpanelet.
3. Marker borepunkterne på væggen eller gulvet gennem hullerne.
4. Bor forhuller med et passende bor til dit væg-/gulvmateriale.
5. Align the safe with the drilled holes and secure it using the provided mounting hardware (screws and anchors).
6. Ensure the safe is firmly attached and does not wobble.

Figure 2: The ARREGUI 51300-S3B Electronic Safe with its door open, revealing the interior and the electronic keypad mechanism. This view helps in understanding the internal layout and battery compartment location.

5. Betjeningsvejledning

5.1. Opening the Safe (User Code)

1. Indtast din 4-6-cifrede brugerkode på tastaturet.
2. Press the "E" or "#" button.
3. If the code is correct, the display will show "OPEN". Within 5 seconds, turn the handle clockwise and pull the door open.
4. If the code is incorrect, the display will show "ERROR". Re-enter the code.

5.2. Lukning af pengeskabet

Close the door and turn the handle counter-clockwise until it is fully locked. The safe will automatically lock.

5.3. Setting/Changing the User Code

1. With the safe door open, press the red reset button located on the inside of the door (usually near the hinge). The display will show "PROG" or "SET".
2. Enter your new 4-6 digit user code.
3. Press the "E" or "#" button to confirm. The display will show "GOOD" or "SUCCESS".
4. Test den nye kode med døren åben, før du lukker den.

5.4. Using the Master Code (Hotel Function)

The safe includes a master code function, typically used by hotel management. This code can open the safe even if a user code is set. Consult your administrator for the master code if applicable.

1. Enter the master code on the keypad.
2. Press the "E" or "#" button.
3. If the code is correct, the display will show "OPEN". Turn the handle clockwise and pull the door open.

5.5. Using the Emergency Key

The emergency key provides manual access to the safe in case of battery failure or forgotten codes.

1. Find nødnøglehullet, som normalt er skjult bag et lille dæksel på tastaturpanelet.
2. Fjern dækslet.
3. Indsæt nødnøglen og drej den med uret.
4. While holding the key turned, rotate the handle clockwise to open the safe door.
5. Once open, remove the key and replace the cover.

6. Vedligeholdelse

• Udskiftning af batteri: When the display shows "LOW BATT" or similar, replace all four AA batteries promptly. Use high-quality alkaline batteries.
• Rensning: Tør pengeskabets yderside af med en blød, tør kludamp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Dørhængsler: Periodically check the door hinges for smooth operation. Apply a small amount of lubricant if necessary.
• Nødnøgler: Store emergency keys in a secure location outside the safe. Do not duplicate them without authorization.

7. Fejlfinding

8. Specifikationer

9. Garanti og support

ARREGUI products are manufactured to high-quality standards. For warranty information and customer support, please refer to the warranty card included with your purchase or visit the official ARREGUI webwebstedet. Behold din købskvittering som købsbevis.

For further assistance, you may contact ARREGUI customer service:

• Webwebsted: www.arregui.es
• E-mail: support@arregui.es