Axis M7104 Video Encoder User Manual

1. Introduktion

The Axis M7104 Video Encoder is designed to integrate analog CCTV cameras into an IP-based video surveillance system. This device digitizes analog video signals, allowing them to be viewed, recorded, and managed over a network. It supports various video surveillance and security system applications, providing a bridge between traditional analog infrastructure and modern IP network capabilities.

Figur 1: Axis M7104 Video Encoder. This image shows the front of the video encoder, highlighting its compact design and various input/output ports for connecting analog cameras and network cables.

2. Sikkerhedsoplysninger

• Kun indendørs brug: This device is designed for indoor use. Do not expose it to outdoor elements, moisture, or extreme temperatures.
• Strømforsyning: Use only the power adapter supplied with the device or a compatible power supply specified by Axis Communications.
• Ventilation: Ensure proper ventilation around the device to prevent overheating. Do not block ventilation openings.
• Montering: Mount the device securely on a stable surface or rack.
• Rensning: Afbryd strømmen før rengøring. Brug en tør, blød klud. Brug ikke flydende rengøringsmidler eller aerosolrengøringsmidler.
• Service: Forsøg ikke selv at servicere dette produkt. Overlad al service til kvalificeret servicepersonale.

3. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• Axis M7104 Video Encoder Unit
• Strømadapter
• Installationsvejledning / Dokumentation
• Monteringsbeslag (hvis relevant)

4. Opsætning

4.1 Fysiske forbindelser

1. Tilslut analoge kameraer: Connect your analog CCTV cameras to the video input ports on the Axis M7104 using coaxial cables. The encoder typically features multiple BNC connectors for this purpose.
2. Opret forbindelse til netværk: Connect an Ethernet cable (Cat 6 recommended) from the RJ45 network port on the encoder to your network switch or router. Ensure the network connection is active.
3. Tilslut strøm: Plug the power adapter into the encoder's power input and then into a suitable power outlet. The device will power on automatically.

4.2 Indledende konfiguration

After connecting the hardware, you will need to configure the encoder via its web grænseflade:

• Opdag enhed: Use the Axis IP Utility or Axis Device Manager software to discover the encoder on your network and obtain its IP address.
• Adgang Web Interface: Åbn a web browser and enter the encoder's IP address. You will be prompted to set a root password for the device.
• Configure Video Streams: Inden for web interface, configure video settings for each connected camera, including resolution, frame rate (e.g., 30 Hz), compression, and streaming profiles.
• Netværksindstillinger: Adjust network settings such as static IP address, DNS, and gateway if required by your network infrastructure.

5. Operating the Video Encoder

Once configured, the Axis M7104 Video Encoder operates by continuously digitizing and streaming video from connected analog cameras over the network. It is primarily used for video surveillance and security systems.

• Levende View: Access live video streams from connected cameras through a compatible Video Management Software (VMS) or directly via the encoder's web interface.
• Indspilning: Integrate the encoder with a Network Video Recorder (NVR) or VMS for continuous or event-triggered recording of video streams.
• Eventhåndtering: Configure event triggers (e.g., motion detection, external input) and corresponding actions (e.g., send notifications, start recording) through the encoder's web grænseflade eller VMS.
• Fjernadgang: Access video streams and manage the encoder remotely via a secure network connection, often facilitated by your VMS or network configuration.

6. Vedligeholdelse

• Rensning: Periodically clean the exterior of the encoder with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the device is powered off before cleaning.
• Firmwareopdateringer: Tjek regelmæssigt Axis Communications website for firmware updates. Keeping the firmware updated ensures optimal performance, security, and access to new features. Follow the instructions provided by Axis for firmware update procedures.
• Miljøforhold: Ensure the operating environment remains within the specified temperature and humidity ranges for indoor use to prevent damage and ensure longevity.

7. Fejlfinding

Almindelige problemer og løsninger:

• Ingen strøm:
  • Verify the power adapter is securely connected to both the encoder and a working power outlet.
  • Kontroller, om stikkontakten fungerer.
• Ingen netværksforbindelse:
  • Ensure the Ethernet cable is properly connected to the RJ45 port on the encoder and the network switch/router.
  • Check the network status lights on the encoder and the switch.
  • Verify network settings (IP address, subnet mask, gateway) are correct.
  • Try restarting the encoder and the network switch.
• Intet videosignal:
  • Confirm that analog cameras are properly connected to the coaxial video input ports.
  • Sørg for, at kameraerne er tændt og fungerer korrekt.
  • Check video settings in the encoder's web interface for the specific channel.
• Kan ikke få adgang Web Interface:
  • Verify the encoder's IP address is correct and reachable from your computer.
  • Ensure your computer is on the same network segment as the encoder.
  • Deaktiver midlertidigt enhver firewall eller antivirussoftware på din computer, der muligvis blokerer adgang.
  • Try using the Axis IP Utility to rediscover the device.

8. Specifikationer

9. Garanti og support

For detaljerede garantioplysninger, teknisk support og yderligere ressourcer, besøg venligst den officielle Axis Communications-side. website. You can find product documentation, FAQs, and contact information for customer service.

Officiel Webwebsted: www.axis.com

Når du kontakter support, bedes du have dit produktmodelnummer (01679-001) og serienummer klar.