Hertz HMR-10 Marine Digital Media Receiver Brugermanual

Indledning

The Hertz HMR-10 is a marine-grade digital media receiver designed for audio entertainment on boats and other marine vehicles. It features AM/FM radio, USB input, and Bluetooth connectivity, allowing you to stream music from your devices. Its compact gauge-style design integrates seamlessly into marine dashboards. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your HMR-10 receiver.

Produkt overview

Opsætning og installation

Proper installation is crucial for the performance and longevity of your HMR-10 receiver. It is recommended to have this unit installed by a qualified marine audio technician.

Overvejelser om montering

• Monteringsmetode: The HMR-10 uses a U-Bracket mounting system.
• Mounting Holes Size: 89.5 mm (3.52 inches) diameter.
• Monteringsdybde: 72 mm (2.83 inches) is required behind the mounting surface.
• Enhedsstørrelse: Diameter 113 mm (4.45 inches) x Depth 96.5 mm (3.79 inches).
• Ensure the mounting location is protected from direct water exposure and excessive heat.
• Allow sufficient space for wiring connections at the rear of the unit.

Wiring Diagram (Refer to Figure 2)

Connect the wiring harness according to the following guidelines. Always disconnect the boat's battery before making any electrical connections.

• Strøm (Gul): Connect to a constant 12V power source (battery positive).
• Jord (sort): Tilslut til et godt jordpunkt på chassis.
• Tilbehør/tænding (rød): Connect to a switched 12V power source (e.g., ignition switch).
• Speaker Outputs (Colored Pairs): Connect to your marine speakers. Ensure correct polarity. The HMR-10 provides 50W x 4 output at 4 Ohms.
• RCA Outputs (Red/White): Til tilslutning til ekstern amplifiers (Front, Rear, Subwoofer if applicable).
• USB-indgang: Til tilslutning af USB-lagerenheder.
• AUX-indgang: Til tilslutning af eksterne lydkilder via et 3.5 mm jackstik.

Betjeningsvejledning

Basic Controls (Refer to Figure 1)

• Tænd/sluk-knap (⏻): Tryk for at tænde/slukke enheden.
• Volume Up/Down (VOL + / VOL -): Justerer lydudgangsniveauet.
• Kilde (SRC): Cycles through available audio sources (FM, AM, USB, Bluetooth, AUX).
• Band (BAND): In radio mode, switches between FM and AM bands.
• Søge-/sporingsknapper (⏮ / ⏴):
  • In radio mode: Short press to seek next/previous station.
  • In USB/Bluetooth mode: Short press to skip to next/previous track.
  • Long press for fast forward/rewind (USB only).
• Afspil/pause (⏸): In USB/Bluetooth mode, plays or pauses playback.
• AS (Auto Store): In radio mode, long press to automatically scan and store strong stations.

Bluetooth-betjening

1. Tryk på SRC button to select "Bluetooth" mode.
2. Aktiver Bluetooth på din mobilenhed, og søg efter tilgængelige enheder.
3. Vælg "Hertz HMR-10" fra listen for at parre.
4. Once paired, you can stream audio from your device to the HMR-10. Use the seek/track and play/pause buttons on the HMR-10 or your device to control playback.

USB-afspilning

1. Indsæt en USB-lagerenhed i USB-porten.
2. Tryk på SRC button to select "USB" mode.
3. Enheden vil automatisk begynde at afspille kompatibel lyd files.
4. Use the seek/track and play/pause buttons to control playback.

Hjælpeindgang

1. Connect your external audio device (e.g., MP3 player) to the AUX input using a 3.5mm audio cable.
2. Tryk på SRC knappen for at vælge "AUX"-tilstand.
3. Audio from your connected device will now play through the HMR-10. Control playback directly from your external device.

Opretholdelse

To ensure the longevity and optimal performance of your Hertz HMR-10 marine receiver, follow these maintenance guidelines:

• Rensning: Brug en blød, damp cloth to wipe down the unit's exterior. Avoid abrasive cleaners, solvents, or harsh chemicals, as they can damage the finish or internal components.
• Vandeksponering: While designed for marine environments, avoid direct high-pressure water spray. Ensure all covers and caps for USB/AUX ports are securely closed when not in use to prevent water ingress.
• Forbindelser: Periodically check all wiring connections for corrosion or looseness. Clean any corroded terminals and ensure connections are secure.
• Opbevaring: If the boat is stored for an extended period, especially in harsh conditions, consider covering the unit or removing it if possible to protect it from extreme temperatures and moisture.

Fejlfinding

Specifikationer

Garanti og support

Hertz products are manufactured to the highest quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Hertz webwebsted.

For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact Hertz customer service or your authorized Hertz dealer. You can find contact information on the official Hertz webwebsted: www.hertzaudiovideo.com

Please have your product model number (HMR-10) and purchase details ready when contacting support.