Indledning
Thank you for choosing the Audibax Onyx 130 Plus White Double-Braced Keyboard Stand. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new keyboard stand. Please read these instructions carefully before use and retain them for future reference.
Sikkerhedsoplysninger
- Sørg for, at alle komponenter er forsvarligt fastgjort, før du placerer et instrument på stativet.
- Overskrid ikke den maksimale bæreevne på 65 kg.
- Juster altid højden forsigtigt, og sørg for, at låsemekanismen er helt aktiveret.
- Hold hænder og fingre væk fra bevægelige dele under justering for at undgå klemning.
- Placer stativet på en stabil, plan overflade for at forhindre, at det vælter.
Pakkens indhold
Bekræft at alle varer er til stede i pakken:
- Audibax Onyx 130 Plus White Keyboard Stand (main frame)
- Upper support arms (pre-attached or separate)
- Lower support feet (pre-attached or separate)
- Allen key (if required for assembly)
- Brugermanual
Opsætningsinstruktioner
The Audibax Onyx 130 Plus keyboard stand is designed for quick and easy assembly, typically within 10 minutes.
- Fold stativet ud: Carefully unfold the main X-frame structure of the stand.
- Fastgør arme (hvis separate): If the upper and lower support arms are not pre-attached, align them with the designated holes on the main frame. Use the provided Allen key to securely fasten them. Ensure all screws are tightened to prevent wobbling.
- Placering: Placer stativet på en flad, stabil overflade.
Figure 1: Fully assembled Audibax Onyx 130 Plus White Keyboard Stand.
Figur 2: Forside view of the keyboard stand, showing the double-braced design.
Betjeningsvejledning
Højdejustering
The stand features an integrated adjustment system with an Easy Lock spherical joint for quick and secure height changes.
- Lås op: Locate the Easy Lock handle (typically a lever or knob) at the center joint of the X-frame. Loosen or pull the handle to disengage the locking mechanism.
- Juster højden: Carefully raise or lower the stand to your desired playing height. The stand can be adjusted up to a maximum height of 97 cm.
- Låse: Once the desired height is reached, engage the Easy Lock handle to secure the stand firmly in position. Ensure it is fully tightened and stable before placing your instrument.
Figure 3: Detail of the Easy Lock spherical joint for height adjustment.
Placing Your Instrument
The upper and lower arms of the stand are reinforced with non-slip rubber to ensure maximum stability and protection for your keyboard.
- Ensure the stand is locked at the desired height.
- Carefully place your keyboard or digital piano onto the upper support arms.
- Verify that the instrument is centered and stable on the non-slip rubber pads.
Figure 4: Non-slip rubber feet provide stability and floor protection.
Figure 5: Upper support arm with non-slip rubber padding for instrument protection.
Transport og opbevaring
This keyboard stand is foldable for easy transport and storage.
- Remove your instrument from the stand.
- Unlock the Easy Lock mechanism.
- Fold the X-frame inwards until it is compact.
- Secure the stand in its folded position if a locking strap or mechanism is present.
Opretholdelse
- Rensning: Tør stativet af med en blød kludamp klud til at fjerne støv og snavs. Undgå slibende rengøringsmidler eller opløsningsmidler.
- Inspektion: Periodically check all bolts, screws, and the locking mechanism for tightness and proper function. Tighten any loose fasteners.
- Gummipuder: Ensure the non-slip rubber pads on the arms and feet are intact and not worn, as this affects stability and instrument protection.
- Opbevaring: Store the stand in a dry environment when not in use.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Stativet er vakkelvornt eller ustabilt. | Loose fasteners; uneven surface; locking mechanism not fully engaged. | Tighten all bolts and screws. Move stand to a level surface. Ensure the Easy Lock handle is fully engaged and tightened. |
| Vanskeligheder med at justere højden. | Locking mechanism is too tight or jammed. | Ensure the Easy Lock handle is fully loosened. Check for any obstructions in the adjustment mechanism. Do not force adjustment. |
| Instrumentet glider på stativet. | Worn or missing non-slip rubber pads; stand not level. | Inspect and replace worn rubber pads if necessary. Ensure the stand is on a level surface. |
Specifikationer
- Model: Onyx 130 Plus
- Modelnummer: 10154055
- Mærke: Audibax
- Farve: Hvid
- Materiale: Stållegering
- Varens vægt: 4.75 kg
- Emnedimensioner (LxBxH): 102 x 7 x 50 cm (foldet)
- Maksimal højde: 97 cm
- Belastningskapacitet: 65 kg
- Montering påkrævet: Ja
- Oprindelsesland: Kina
Garanti og support
For warranty information, please refer to the terms and conditions provided by your retailer or the point of purchase. Audibax products are designed for durability and performance.
If you encounter any issues or require technical assistance, please contact Audibax customer support or your authorized dealer. Contact information can typically be found on the official Audibax webhjemmeside eller gennem din forhandler.