3M™ X5-P4PTCS1 Premium 4 Point Chin Strap Instruction Manual

Produkt overview

The 3M™ X5-P4PTCS1 Premium 4 Point Chin Strap is designed for use with 3M SecureFit™ Safety Helmet X5000 series. This accessory enhances helmet stability and security. It features a magnetic buckle for easy one-hand operation and quick, smooth adjustment for a customized and secure fit.

• Magnetic buckle for one-hand operation.
• Easy adjustment for a customized fit.
• Specifically designed to fit 3M SecureFit™ X5000 Series Safety Helmets.

Hvad er der i æsken

One (1) 3M™ X5-P4PTCS1 Premium 4 Point Chin Strap with magnetic buckle.

Opsætning og installation

This chin strap is designed to integrate with 3M SecureFit™ Safety Helmet X5000 Series. Ensure your helmet is compatible before installation.

1. Fastgør remmen: Locate the four attachment points on your 3M SecureFit™ Safety Helmet X5000. Align the strap's connectors with these points and secure them firmly. Refer to your helmet's manual for specific attachment details if needed.
2. Position the Chin Strap: Once attached, position the chin strap under your chin.

Image showing the 3M X5-P4PTCS1 Premium 4 Point Chin Strap detached, illustrating its four attachment points and magnetic buckle.

Betjeningsvejledning

1. Fastening the Chin Strap: Bring the two ends of the chin strap together under your chin. The magnetic buckle will automatically align and connect with a secure click. Ensure the buckle is fully engaged.
2. Justering af pasformen: Use the quick-adjustment sliders on each side of the strap to tighten or loosen the fit. The strap should be snug but comfortable, preventing the helmet from shifting without causing discomfort. Ensure two fingers can fit between the strap and your chin.
3. Releasing the Chin Strap: To release, simply pull the two halves of the magnetic buckle apart. The magnetic mechanism allows for quick, one-hand disconnection.

Image showing the 3M X5-P4PTCS1 Premium 4 Point Chin Strap with its magnetic buckle connected, demonstrating its compact and secure design.

Opretholdelse

• Rensning: Clean the chin strap with mild soap and water. Rinse thoroughly and allow to air dry completely before reattaching to the helmet or storing. Do not use harsh chemicals or abrasive cleaners.
• Inspektion: Regularly inspect the chin strap for any signs of wear, tear, fraying, or damage to the buckle mechanism. If any damage is observed, replace the chin strap immediately to maintain safety and performance.
• Opbevaring: Store the chin strap in a clean, dry place away from direct sunlight and extreme temperatures.

Fejlfinding

• Remmen føles for løs eller for stram: Adjust the sliders on both sides of the strap until a comfortable and secure fit is achieved. Ensure the helmet remains stable on your head.
• Magnetic buckle not engaging: Check for any obstructions or debris in the buckle mechanism. Ensure the two halves are aligned correctly. If the buckle is damaged, replace the chin strap.
• Strap detaches unexpectedly: Verify that all four attachment points are securely fastened to the helmet. Inspect the strap and attachment points for damage. If damage is found, replace the chin strap.

Specifikationer

• Pakkedimensioner: 9.02 x 7.83 x 2.09 tommer
• Varens vægt: 2.11 ounce
• Fabrikant: 3M
• ASIN: B07XF8T6HP
• Varemodelnummer: 94497
• Dato først tilgængelig: 4. september 2019

Vigtige sikkerhedsoplysninger

3M's industrielle og erhvervsmæssige produkter er beregnet til, mærket og pakket til salg til uddannede industrielle og erhvervsmæssige kunder til brug på arbejdspladsen. Medmindre andet specifikt er angivet på den relevante produktemballage eller i litteraturen, er disse produkter ikke beregnet til, mærket eller pakket til salg til eller brug af forbrugere (f.eks. til hjemmet, personlig brug, folkeskole eller gymnasium, fritids-/sportsbrug eller andre anvendelser, der ikke er beskrevet i den relevante produktemballage eller litteraturen), og skal vælges og anvendes i overensstemmelse med gældende sundheds- og sikkerhedsforskrifter og -standarder (f.eks. US OSHA, ANSI) samt al produktlitteratur, brugervejledninger, advarsler og andre begrænsninger, og brugeren skal træffe alle nødvendige foranstaltninger i henhold til enhver tilbagekaldelse, felthandling eller anden meddelelse om produktbrug. Misbrug af 3M's industrielle og erhvervsmæssige produkter kan resultere i personskade, sygdom, død eller materielle skader. For hjælp til produktvalg og -brug, kontakt din sikkerhedsprofessionelle på stedet, industrihygiejniker eller anden fagekspert. For yderligere produktinformation, besøg www.3M.com.

Support og garanti

For product support, technical assistance, or warranty information, please contact 3M customer service or visit the official 3M website kl www.3M.com. Keep your purchase receipt for warranty claims.