Indledning
This instruction manual provides important information for the safe installation, operation, and maintenance of your BESTTEN 15 Amp Decorator Receptacle Outlet. Please read this manual thoroughly before installation and keep it for future reference.

Image: BESTTEN 15 Amp Decorator Receptacle Outlet with included wallplate, showcasing its clean design and UL listing.
Sikkerhedsoplysninger
ADVARSEL: Risiko for elektrisk stød eller brand.
- Installationen skal udføres af en kvalificeret elektriker eller en kyndig person i overensstemmelse med alle nationale og lokale el-forskrifter.
- Sluk for strømmen ved afbryderen eller sikringsskabet før ledningsføring.
- Brug kun kobbertråd. Må ikke bruges med aluminiumtråd.
- Sørg for, at alle ledningsforbindelser er sikre og korrekt isolerede.
- Do not exceed the maximum electrical rating of 15A/125V/1875W.
Hvad er der i æsken
- Decorator Receptacle Outlets (Quantity as per pack size, e.g., 30)
- Dekorator vægplader
- Monteringsskruer
Specifikationer
| Modelnummer | LD-3012 |
| Elektrisk vurdering | 15A/125V/1875W |
| Produktdimensioner | 4.5"L x 1.29"W x 0.04"D (Outlet: 4.06"H x 1.29"W x 0.98"D) |
| Materiale | Polycarbonat (PC) |
| Farve | Hvid |
| Certificeringer | UL/cUL opført |

Image: Detailed product dimensions for the BESTTEN 15 Amp Decorator Receptacle Outlet and its accompanying wallplate.
Installationsvejledning
- Sluk for strømmen: Locate the circuit breaker or fuse box controlling the outlet you intend to replace or install. Turn off the power to that circuit. Verify power is off using a voltage tester.
- Fjern gammel stikkontakt (hvis relevant): Unscrew and carefully remove the old wallplate and outlet from the electrical box. Disconnect the wires, noting which wire was connected to which terminal.
- Forbered ledninger: Strip approximately 1/2 inch of insulation from the ends of the wires if necessary. Ensure wires are straight and free of nicks.
- Ledningsforbindelser: Connect the wires to the new BESTTEN receptacle. This outlet supports both side wiring and quick back push-in wiring.
- Jordledning (grøn eller bart kobber): Tilslut til den grønne jordskrue.
- Neutral ledning (hvid): Connect to the silver terminal screws or use the back push-in holes for neutral.
- Varmtråd (sort): Connect to the brass terminal screws or use the back push-in holes for hot.

Image: Wiring diagram illustrating both side wiring (for 12 AWG & 14 AWG) and back wiring (for 14 AWG only) methods for the receptacle.
Note: For split receptacle applications, break off the tabs between the hot terminals to allow two-circuit conversion.
- Monter stikkontakten: Carefully fold the wires into the electrical box. Secure the receptacle to the electrical box using the provided mounting screws. The plaster ears can be broken off for flush alignment if needed.
- Installer vægplade: Attach the decorator wallplate over the installed receptacle using the provided screws.
- Gendan strøm: Tænd for strømmen igen ved afbryderen eller sikringsboksen.
- Prøve: Plug a device into the outlet to ensure it is functioning correctly.
Operation
BESTTEN 15 Amp Decorator Receptacle Outlet functions as a standard electrical outlet. Once properly installed and powered, simply insert the plug of your electrical device into the receptacle slots. Ensure the plug is fully inserted for a secure connection.
Opretholdelse
- Rensning: To clean the outlet and wallplate, ensure power is off at the circuit breaker. Wipe with a soft, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Inspektion: Periodically inspect the outlet for any signs of damage, such as cracks, discoloration, or loose connections. If any damage is observed, turn off power and have the outlet inspected and replaced by a qualified professional.
Fejlfinding
- Ingen strøm til stikkontakten:
- Check the circuit breaker or fuse box to ensure the circuit is on.
- Kontroller, at alle ledningsforbindelser er sikre.
- Ensure the outlet is properly wired (hot, neutral, ground).
- Plug Does Not Insert Easily:
- This outlet is non-tamper-resistant. If a plug does not insert easily, ensure it is aligned correctly. Do not force the plug.
Garanti og support
BESTTEN products are designed for durability and performance. For warranty information or technical support, please refer to the contact information provided with your purchase or visit the official BESTTEN webwebstedet. Behold din købskvittering som købsbevis.