Ledvance Endura Pro Flood LED Outdoor Projector with Motion Detector

1. Introduktion og overview

The Ledvance Endura Pro Flood LED Outdoor Projector is a highly efficient, wall-mounted sensor floodlight designed for outdoor use. It features a wide beam angle and an innovative optical design, providing uniform surface illumination. Equipped with a motion detector, this projector offers enhanced security and convenience for various outdoor applications.

Key features include an adjustable lamp head for customized lighting, a robust IP55 protection rating for outdoor durability, and an IK05 impact resistance rating. This product is suitable for illuminating parking lots, squares, parks, and other exterior areas.

Figure 1: Ledvance Endura Pro Flood LED Projector packaging.

2. Sikkerhedsoplysninger

Læs alle sikkerhedsinstruktioner omhyggeligt inden installation og betjening. Manglende overholdelse af disse instruktioner kan resultere i elektrisk stød, brand eller andre farer.

• Elektrisk sikkerhed: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Ensure the power supply is disconnected before installation, maintenance, or repair.
• Udendørs brug: This product is designed for outdoor use with an IP55 rating, protecting against dust and low-pressure water jets. Do not submerge the product in water.
• Montering: Mount the projector securely on a stable surface that can support its weight.
• Lyskilde: This luminaire contains a non-replaceable LED light source. Do not attempt to replace the LED module.
• Driftstemperatur: Ensure the operating environment is within the specified temperature range to prevent overheating.

3. Pakkens indhold

Bekræft at alle komponenter er til stede i pakken:

• 1 x Ledvance Endura Pro Flood LED Projector with Motion Detector
• Monteringsudstyr (skruer, vægdyvler) - (Typically included, but check your specific package)
• Instruktionsmanual

4. Opsætning og installation

Follow these steps for proper installation of your LED projector:

1. Forberedelse: Disconnect power at the main circuit breaker before beginning installation. Choose a suitable mounting location on an outdoor wall, ensuring it is stable and provides the desired illumination coverage.
2. Montering: Use the provided mounting hardware to securely attach the projector to the wall. Mark the drilling points, drill holes, insert wall plugs, and then fasten the projector base.
3. Ledningsføring: Connect the electrical wires (Live, Neutral, Earth) from your power supply to the corresponding terminals on the projector. Ensure all connections are tight and properly insulated. Refer to the wiring diagram in the product packaging for specific details.
4. Justering af Lamp Hoved: Lamp head is pivotable. Adjust its angle to direct the light beam to your desired area.

Figur 2: Produktmål til installationsplanlægning.

5. Betjeningsvejledning

The Ledvance Endura Pro Flood projector offers four selectable operating modes. These modes are typically set via controls located on the unit, often behind a cover or on the side panel.

Figur 3: Eksample of sensor and adjustment controls (actual appearance may vary).

5.1. Valg af tilstand

Refer to the markings next to the adjustment dials or switches on your specific unit to select one of the following modes:

• Permanent lys: The projector remains continuously illuminated, regardless of motion or ambient light levels.
• Standby: The projector may operate at a reduced brightness level (e.g., 20%) and switch to full brightness upon motion detection. This mode provides a constant low-level light for ambiance and security.
• Bevægelsesaktivering: The projector turns on to full brightness only when motion is detected within its sensor range. It will turn off after a set delay if no further motion is detected.
• Dusk-to-Dawn: The projector automatically turns on at dusk and off at dawn, based on ambient light levels. Motion detection may still be active in this mode, triggering full brightness when needed.

5.2. Sensor Adjustments

Your projector typically includes controls for:

• Tidsforsinkelse (TID): Adjusts how long the light stays on after motion is detected.
• Følsomhed (SENS): Adjusts the detection range or sensitivity of the motion sensor.
• Lux-niveau (LUX): Sets the ambient light threshold at which the sensor becomes active (for dusk-to-dawn or motion modes).

Experiment with these settings to achieve optimal performance for your specific environment.

Figure 4: Motion detection in action, illuminating a path.

6. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer optimal ydeevne og levetid for din projektor.

• Rensning: Rengør linsen og sensorvinduet regelmæssigt med en blød kludamp cloth to remove dust, dirt, or debris that may obstruct light output or sensor function. Do not use abrasive cleaners or solvents.
• Inspektion: Annually inspect the wiring and mounting hardware for any signs of wear, corrosion, or loosening. Tighten any loose screws and replace damaged components if necessary.
• Ingen dele, der kan serviceres af brugeren: The LED light source is integrated and not user-replaceable. Do not attempt to open the housing or modify the internal components.

7. Fejlfinding

Hvis du støder på problemer med din projektor, kan du se følgende almindelige problemer og løsninger:

Hvis fejlfindingstrinene ikke løser problemet, skal du kontakte kundesupport for yderligere assistance.

8. Specifikationer

9. Garanti og support

This Ledvance Endura Pro Flood LED Projector comes with a 10 års garanti, ensuring quality and reliability. For warranty claims or technical support, please retain your proof of purchase and contact your retailer or Ledvance customer service.

For additional information or assistance, please visit the official Ledvance webwebstedet eller kontakt din lokale forhandler.