MEAN WELL LRS-350-12 Switching Power Supply User Manual

1. Introduktion

This manual provides essential information for the safe and efficient use of your MEAN WELL LRS-350-12 Switching Power Supply. This unit is designed to provide a stable 12V DC output from an AC input, suitable for various applications including LED projects, industrial automation, and electronic instruments.

Læs venligst denne manual grundigt inden installation og ibrugtagning, og gem den til senere brug.

2. Sikkerhedsinstruktioner

• Elektrisk fare: Denne enhed fungerer med høj lydstyrketage. Installation and maintenance should only be performed by qualified personnel.
• Input bindtage Valg: Sørg for, at AC input voltage switch is set correctly (115VAC or 230VAC) before connecting to power. Incorrect setting can cause damage.
• Ventilation: Sørg for tilstrækkelig ventilation omkring strømforsyningen for at forhindre overophedning. Bloker ikke ventilationsåbningerne.
• Jording: Always connect the protective earth (ground) terminal to a proper ground connection.
• Overbelastningsbeskyttelse: Do not exceed the rated output current (29A) or power (348W) to prevent damage and ensure safe operation.
• Miljø: Do not expose the unit to moisture, rain, or excessive dust. Operate within specified temperature and humidity ranges.

3. Produktfunktioner

• Udgang Voltage: 12V DC
• Nominel strøm: 29A
• Nominel effekt: 348W
• Input bindtage Range: 90 ~ 132VAC / 180 ~ 264VAC (selectable by switch)
• Built-in cooling FAN with ON-OFF control (activates at RTH3 ≥ 50℃, turns off at RTH3 ≤ 40℃)
• Beskyttelser: Kortslutning, Overbelastning, Over Voltage, Over temperatur
• Certifications: UL and CE

4. Opsætning og installation

Follow these steps for proper installation of your LRS-350-12 power supply.

4.1 Udpakning

Carefully remove the power supply from its packaging. Inspect the unit for any physical damage. If damage is found, do not proceed with installation and contact your supplier.

4.2 Indgang Voltage Valg

Before connecting any power, ensure the AC input voltagValgkontakten er indstillet til den korrekte voltage for your region (115VAC for North America, 230VAC for most other regions). This switch is typically located on the side of the unit.

Billede: Side view of the LRS-350-12 power supply, highlighting the red switch for AC input voltage selection (115V/230V).

Advarsel: Failure to set the correct input voltage before powering on will result in damage to the unit.

4.3 Ledningsforbindelser

The LRS-350-12 uses screw terminal blocks for both AC input and DC output connections. Refer to the labels on the unit for correct terminal identification.

Billede: Detaljeret view of the LRS-350-12 terminal block, showing connections for AC input (L, N, Ground) and DC output (+V, -V).

1. AC-indgang: Connect your AC mains power to the terminals labeled 'L' (Live), 'N' (Neutral), and '⊗' (Ground). Ensure secure connections.
2. DC-udgang: Connect your load to the terminals labeled '+V' (Positive 12V DC) and '-V' (Negative/Ground). Multiple '+V' and '-V' terminals are provided for convenience and to distribute current.
3. Voltage Justering: A small potentiometer (labeled 'V.ADJ' or similar) is available near the output terminals to fine-tune the output voltage within a small range. Use a small screwdriver to adjust if necessary.

5. Betjeningsvejledning

1. Indledende opstart: After all connections are secure and the input voltage switch is correctly set, apply AC power to the unit.
2. Indikator LED: A green LED indicator (if present) will illuminate, signifying that the power supply is operational.
3. Belastningsforbindelse: Connect your 12V DC load to the output terminals. Ensure the total current draw does not exceed 29A.
4. Køleventilator: The built-in cooling fan operates automatically. It will turn on when the internal temperature (RTH3) reaches 50℃ and turn off when it drops below 40℃. This ensures optimal operating temperature.

6. Vedligeholdelse

• Rensning: Periodically clean the exterior of the power supply with a dry, soft cloth. Ensure ventilation openings are free from dust and debris to maintain proper airflow for the cooling fan.
• Tilslutningstjek: Regularly inspect all wiring connections to ensure they are tight and secure. Loose connections can lead to poor performance or safety hazards.
• Miljøforhold: Ensure the operating environment remains within the specified temperature and humidity ranges to prolong the lifespan of the unit.

Billede: Top view of the LRS-350-12 power supply, illustrating the cooling fan and ventilation slots crucial for heat dissipation.

7. Fejlfinding

8. Specifikationer

9. Garanti og support

For warranty information, please refer to the documentation provided with your purchase or contact your authorized MEAN WELL distributor or reseller. Warranty terms and conditions may vary by region and point of purchase.

For technical support or further inquiries, please visit the official MEAN WELL website or contact their customer service department. The manual reference on the product label points to www.meanwell.com/manual.html for yderligere ressourcer.