OtterBox 77-62479

OtterBox Strada Series Case for iPhone 11 Instruction Manual

Model: 77-62479

Indledning

This instruction manual provides essential information for the proper use and care of your OtterBox Strada Series Case for iPhone 11. Please read this manual thoroughly before installation and operation to ensure optimal protection and functionality for your device.

Setup: Case Installation

Follow these steps to correctly install your iPhone 11 into the OtterBox Strada Series Case.

  1. Klargør din enhed: Sørg for, at din iPhone 11 er ren og fri for støv eller snavs.
  2. Open the folio cover: Gently open the leather folio cover of the Strada Series case.
  3. Insert the iPhone: Align your iPhone 11 with the polycarbonate shell. Start by inserting the top edge of the phone into the case, ensuring the camera module aligns with the case cutout.
  4. Secure the phone: Gently press the remaining edges of your iPhone into the case until it is fully seated and secure. Ensure all buttons and ports are accessible and aligned with the case openings.
  5. Close the folio cover: Close the leather folio cover. The magnetic latch will secure it in place, protecting your screen.
OtterBox Strada Series Case for iPhone 11, side view with folio cover open, showing the phone being inserted.

Figur 1: Side view of the OtterBox Strada Series Case with the folio cover open, illustrating the phone insertion process.

OtterBox Strada Series Case for iPhone 11, back view, showing the textured leather finish and camera cutout.

Figur 2: Bagside view of the installed OtterBox Strada Series Case, highlighting the camera cutout and textured leather.

Betjeningsvejledning

The OtterBox Strada Series Case is designed for daily use, offering protection and convenience.

  • Skærmbeskyttelse: Keep the folio cover closed when not actively using your iPhone 11 to protect the screen from scratches and impacts. The magnetic latch ensures the cover stays securely closed.
  • Card Slot Usage: The integrated vertical slot inside the folio cover is designed to hold one card or a small amount of cash. Avoid overfilling the slot, as this may prevent the cover from closing properly or stretch the material.
  • Button and Port Access: The case provides precise cutouts for all buttons, speakers, and charging ports, ensuring full functionality without removing the case.
  • Trådløs opladning: The case is compatible with wireless charging. Ensure proper alignment of your iPhone 11 with the wireless charging pad for efficient charging.
OtterBox Strada Series Case for iPhone 11, inside view with folio cover open, showing two card slots.

Figur 3: Interiør view of the OtterBox Strada Series Case, displaying the integrated card slots within the folio cover.

OtterBox Strada Series Case for iPhone 11, front view with folio cover closed, showing the magnetic latch.

Figur 4: Forside view of the OtterBox Strada Series Case with the folio cover closed, secured by the magnetic latch.

Vedligeholdelse og pleje

Proper care will extend the life and appearance of your OtterBox Strada Series Case.

  • Cleaning the Leather: For the premium leather exterior, wipe gently with a soft, damp cloth. Avoid harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the leather finish.
  • Cleaning the Polycarbonate Shell: The inner polycarbonate shell can be cleaned with a soft, slightly damp klæde.
  • Undgå ekstreme forhold: Udsæt ikke etuiet for ekstreme temperaturer, direkte sollys i længere perioder eller skarpe genstande, da dette kan forårsage skade eller misfarvning.

Fejlfinding

Refer to these common issues and solutions for your Strada Series Case.

  • Folio cover does not close completely:

    Ensure that the card slot is not overfilled. Remove any excess cards or cash that may be preventing the magnetic latch from engaging fully.

  • Wireless charging is inconsistent:

    Verify that your iPhone 11 is correctly centered on the wireless charging pad. The case is designed to be compatible with wireless charging, but proper alignment is crucial.

  • Knapperne er svære at trykke på:

    Ensure your iPhone 11 is fully seated within the polycarbonate shell and properly aligned. Remove the phone and re-install it, ensuring a snug fit.

Specifikationer

Produktdimensioner6.16 x 3.25 x 0.6 tommer
Varens vægt5.6 ounce
Modelnummer77-62479
Særlige funktionerTrådløs opladning kompatibel
FormfaktorBasic Case (Folio)
FarveSHADOW (BLACK/PEWTER)
Kompatible enhederiPhone 11
MaterialePremium leather, Metal latch, Polycarbonate shell
FabrikantOtter Products

Garantioplysninger

OtterBox provides a limited warranty that covers material and workmanship defects for the Strada Series Case. For detailed information regarding warranty terms, conditions, and how to file a claim, please refer to the official OtterBox webwebsted eller kontakt deres kundesupport.

Kundesupport

For further assistance, product inquiries, or technical support, please visit the official OtterBox website. You can typically find FAQs, support articles, and contact information for their customer service team there.

Officiel Webwebsted: www.otterbox.com

© 2026 OtterBox. All rights reserved. Information in this manual is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.