1. Introduktion
This manual provides essential instructions for the safe and effective use of your HZPOWEN AC/DC Adapter Charger. Please read this manual thoroughly before using the product and retain it for future reference.
The HZPOWEN AC/DC Adapter Charger is designed to provide reliable power for various compatible jump starters and portable power stations. It features a universal input voltage range and specific output for charging your devices.
2. Vigtige sikkerhedsinstruktioner
- Udsæt ikke adapteren for regn eller fugt.
- Adapteren må ikke adskilles. Overlad al service til kvalificeret personale.
- Sørg for adapterens lydstyrketage and current ratings match your device's requirements before connecting. Incorrect voltage kan beskadige din enhed.
- Avoid using the adapter if the cord or plug is damaged.
- Hold adapteren væk fra varmekilder og direkte sollys.
- Tag adapteren ud af stikkontakten, når den ikke er i brug.
Image 1: HZPOWEN AC/DC Adapter Charger. This image displays the main unit of the adapter with its attached power cord and barrel connector. The label on the adapter shows input and output specifications.
3. Produktspecifikationer
| Feature | Specifikation |
|---|---|
| Model | HP-13510 |
| Input bindtagRækkevidde | AC 100-240V, 50/60Hz |
| Udgang Voltage | DC 13.5V |
| Udgangsstrøm | 1A |
| Stikstørrelse | 5.5 mm x 2.5 mm (cylinderstik) |
| Certificeringer | CE / FCC / RoHS |
| Dimensioner | Approx. 3.1 x 1.96 x 1.18 inches (main body) |
| Vægt | Ca. 3.84 ounces |
Image 2: Adapter Dimensions. This image illustrates the physical dimensions of the adapter, including its length, width, and height in inches.
Image 3: Connector Size. This image highlights the barrel connector, showing its outer diameter of 5.5mm and inner diameter of 2.1mm. Note: The product description states a 5.5mm x 2.5mm connector. Please verify your device's required inner diameter for compatibility.
4. Kompatibilitet
This adapter is designed to be compatible with a range of jump starters and portable power stations, including but not limited to:
- Peak Stanley FATMAX 700 Peak 350 AMP J7CSR, J7CS Jump Starter
- Peak 300, 450, 600, 700 Amp Jump startere
- Duralast Gold BP-DLG, BP-DL900 (700 AMP, 900 Amp) Jump Starter
- Duracell Powerpack 450 Amp, 300 Amp
- Stanley J309, J3B09 (600 Peak 300 Amp)
Vigtig bemærkning:
Always verify the input voltage and connector size requirements of your specific device before connecting this adapter. While this adapter is rated for 13.5V 1A with a 5.5mm x 2.5mm connector (as per product description), some compatible devices may have slightly different requirements (e.g., 12V output or 5.5mm x 2.1mm connector as seen in some product images). Using an adapter with incorrect specifications can damage your device.
5. Opsætningsvejledning
- Undersøg adapteren: Før første brug skal adapteren og dens kabel kontrolleres visuelt for tegn på skader. Må ikke anvendes, hvis den er beskadiget.
- Bekræft enhedskompatibilitet: Confirm that your jump starter or portable power station requires a 13.5V DC input and has a compatible 5.5mm x 2.5mm barrel connector.
- Opret forbindelse til enhed: Insert the barrel connector of the HZPOWEN adapter firmly into the charging port of your jump starter or portable power station.
- Tilslut til stikkontakten: Plug the AC prongs of the adapter into a standard AC 100-240V wall outlet.
- Start opladning: Once connected, your device should begin charging. Refer to your device's manual for specific charging indicators (e.g., LED lights).
6. Betjeningsvejledning
The HZPOWEN AC/DC Adapter Charger operates automatically once connected to a power source and a compatible device. It is designed for continuous charging until the connected device reaches full capacity, or until disconnected.
- Opladningstid: Charging duration will vary depending on the capacity and current charge level of your jump starter or portable power station. Consult your device's manual for estimated charging times.
- Beskyttelse mod overopladning: The adapter is equipped with built-in safety protections, including overcharge protection, to prevent damage to your device from excessive charging.
- Temperaturovervågning: The adapter includes temperature protection to ensure safe operation.
Image 4: Built-in Safety Protections. This diagram illustrates the various safety features integrated into the adapter, including protection against temperature fluctuations, overloads, overcharging, and short circuits.
7. Pleje og vedligeholdelse
- Rensning: Frakobl adapteren fra alle strømkilder før rengøring. Brug en blød, tør klud til at tørre ydersiden af. Brug ikke flydende rengøringsmidler eller opløsningsmidler.
- Opbevaring: Store the adapter in a cool, dry place away from direct sunlight and extreme temperatures. Coil the cable loosely to prevent kinks or damage.
- Inspektion: Periodically inspect the adapter and cable for any signs of wear, cuts, or damage. Replace the adapter if any damage is observed.
8. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Enheden oplader ikke |
|
|
| Adapter feels hot during use |
|
|
9. Garanti og support
HZPOWEN products are typically covered by a manufacturer's warranty. For specific warranty details, including duration and terms, please refer to the product packaging or contact HZPOWEN customer support directly.
For technical assistance, troubleshooting, or warranty claims, please contact your retailer or the manufacturer. Keep your purchase receipt as proof of purchase.
Fabrikant: HZPOWEN
Webwebsted: Visit HZPOWEN Store on Amazon