WAVLINK AC600 Udendørs WiFi-forstærker Brugermanual

1. Introduktion

This manual provides detailed instructions for the installation, configuration, and operation of your WAVLINK AC600 Outdoor WiFi Extender. This device is designed to extend your existing wireless network coverage, providing stable and high-speed internet access in outdoor environments. Please read this manual thoroughly before using the product to ensure proper setup and optimal performance.

2. Sikkerhedsoplysninger

• Udsæt ikke enheden for ekstreme temperaturer, fugt eller direkte sollys.
• Sørg for, at strømadapteren er kompatibel med din lokale strømforsyning.
• Undgå at placere enheden i nærheden af ​​stærke elektromagnetiske felter.
• Forsøg ikke selv at skille enheden ad eller reparere den. Kontakt kvalificeret personale for service.
• Brug kun tilbehør specificeret af producenten.

3. Pakkens indhold

Bekræft at alle varer er til stede i din pakke:

• WAVLINK AC600 Outdoor WiFi Extender
• Omni-directional Antennas (2)
• PoE konverter
• Strømadapter
• RJ45 Networking Cable
• Mounting Straps/Accessories
• Hurtig installationsvejledning
• Garantikort

Image: Contents of the WAVLINK AC600 Outdoor WiFi Extender package.

4. Produktet er slutview

Familiarize yourself with the device's ports and indicators.

Billede: Bund view of the WAVLINK AC600 Extender, highlighting the WAN/LAN port, Reset button, and Ground (GND) connection.

4.1 Porte og knapper

• WAN/LAN-port: Used for connecting to your router/modem or other network devices. Supports Power over Ethernet (PoE).
• Nulstil knap: Press and hold for 8 seconds to restore the device to factory default settings.
• GND (Jord) terminal: For grounding the device to protect against electrical surges.

4.2 LED-indikatorer

• Power LED: Indikerer strømstatus.
• WAN/LAN-LED: Indicates network activity on the WAN/LAN port.
• WiFi-LED: Angiver aktivitet på trådløst netværk.
• Signalstyrke LED'er: Indicate the strength of the wireless signal.

5. Opsætning

5.1 Fysisk installation

The WAVLINK AC600 is designed for outdoor use and can be mounted on a pole or wall.

1. Attach the two omni-directional antennas to the designated connectors on the device.
2. Securely mount the device in your desired outdoor location using the provided mounting straps or hardware. Ensure it has a clear line of sight to the area requiring WiFi coverage.
3. Connect an Ethernet cable from the device's WAN/LAN port to the PoE converter's PoE port.
4. Connect another Ethernet cable from the PoE converter's LAN port to your router or network switch.
5. Connect the power adapter to the PoE converter and plug it into a power outlet.

Image: The WAVLINK AC600 Extender installed outdoors, operating effectively even during rainfall.

Image: The WAVLINK AC600 Extender mounted on a pole in an outdoor garden, providing extended WiFi coverage.

Image: The WAVLINK AC600 Extender mounted on a metal railing, illustrating its versatile installation capabilities.

5.2 Indledende konfiguration

After physical installation, configure the device via a web browser.

1. Connect your computer to the PoE converter's LAN port using an Ethernet cable, or connect wirelessly to the extender's default WiFi network (SSID and password usually found on a label on the device or in the Quick Installation Guide).
2. Åbn a web browser og indtast standard IP-adressen (f.eks. http://192.168.10.1) or the default domain name (e.g., http://ap.setup) i adresselinjen.
3. Indtast standardbrugernavn og adgangskode (normalt 'admin' for begge).
4. Follow the on-screen setup wizard to select your desired operating mode (AP/Router, Repeater, or WISP) and configure network settings.

6. Driftstilstande

The WAVLINK AC600 supports multiple operating modes to suit various network requirements.

Image: Diagram showing the three main operating modes: AP/Router Mode, Repeater Mode, and AP+Repeater Mode.

6.1 AP/Router-tilstand

In this mode, the device acts as a primary router or an access point, creating a new wireless network.

• Routertilstand: Connects to a modem via the WAN/LAN port and provides internet access to connected devices, acting as a DHCP server.
• Access Point (AP) tilstand: Connects to an existing wired router via the WAN/LAN port and extends the wired network wirelessly. It does not perform NAT or DHCP.

6.2 Repeater-tilstand

The device wirelessly connects to an existing WiFi network and re-broadcasts it, extending its coverage. This mode is ideal for eliminating WiFi dead zones.

• Select the Repeater mode during setup.
• Scan for available WiFi networks and select the one you wish to extend.
• Indtast adgangskoden til det valgte netværk.
• The extender will then broadcast the extended network, often with a suffix like '_EXT'.

6.3 WISP-tilstand (Trådløs internetudbyder)

In WISP mode, the device acts as a client to an existing wireless network (e.g., a public hotspot) and shares that internet connection with local wired and wireless clients, functioning as a router.

• Select WISP mode during setup.
• Scan for the wireless network you want to connect to as a client.
• Configure the local network settings for your devices.

7. Vedligeholdelse

7.1 Firmwareopdatering

Tjek regelmæssigt den officielle WAVLINK website for firmware updates. Firmware updates can improve performance, add new features, and fix bugs.

1. Download den nyeste firmware file for your model from the WAVLINK support page.
2. Log in to the device's web ledelsesgrænseflade.
3. Navigate to the 'System Tools' or 'Firmware Upgrade' section.
4. Upload den downloadede firmware file og følg instruktionerne på skærmen. Sluk ikke for enheden under opgraderingsprocessen.

7.2 Rengøring

Tør enheden af ​​med en blød, tør klud. Brug ikke flydende rengøringsmidler eller aerosoler.

8. Fejlfinding

• Ingen strøm: Ensure the power adapter is securely connected to the PoE converter and a working power outlet. Check the Power LED.
• Kan ikke få adgang Web Ledelsesside: Verify your computer's IP address is in the same subnet as the extender (e.g., 192.168.10.x). Try clearing your browser's cache or using a different browser. Ensure the Ethernet cable is properly connected.
• Dårlig signalstyrke: Relocate the extender to a position with better line of sight to your main router. Adjust antenna orientation. Check for obstructions like thick walls or metal objects.
• Langsom forbindelseshastighed: Ensure the extender is placed within optimal range of the main router. Check for interference from other wireless devices. Update firmware.
• Glemt login-adgangskode: Perform a factory reset by pressing and holding the Reset button for 8 seconds. This will revert all settings to default.

9. Specifikationer

10. Garanti og support

WAVLINK products come with a limited warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, firmware updates, or further assistance, please visit the official WAVLINK webwebsted eller kontakt deres kundeservice.

WAVLINK Officiel Webwebsted: www.wavlink.com