GoolRC HRN9616310361626MB

GoolRC 80A Brushless ESC Instruction Manual

For 1/10 RC Truck Off-Road Car

Indledning

This manual provides essential information for the proper installation, operation, and maintenance of your GoolRC 80A Brushless Electronic Speed Controller (ESC). Please read this manual thoroughly before use to ensure optimal performance and safety.

GoolRC 80A Brushless ESC

Billede: The GoolRC 80A Brushless ESC, featuring its compact design and integrated cooling fan.

Sikkerhedsoplysninger

  • Frakobl altid batteriet fra ESC'en, når den ikke er i brug.
  • Sørg for, at alle forbindelser er sikre og korrekt polariserede for at forhindre skader.
  • Avoid operating the ESC in extreme temperatures or conditions beyond its waterproof rating.
  • Keep the ESC away from children.
  • Refer to your RC vehicle's manual for additional safety guidelines.

Produktegenskaber

The GoolRC 80A Brushless ESC offers the following key features:

  • Waterproof and dustproof design, suitable for 1/10 scale RC cars.
  • High current capability: 80A continuous, 480A burst.
  • Advanced protection functions: Low voltage cut-off, over-heat protection, throttle signal loss protection, and motor blocked protection.
  • Efficient power delivery with high-frequency drive system and low-resistance field effect tube.
  • Compatible with pocket-sized program cards for easy configuration.
  • Excellent heat dissipation for stable operation.
GoolRC 80A Brushless ESC Features Diagram

Billede: Diagram illustrating the key features of the GoolRC 80A ESC, including high-quality components, strong current capability, excellent heat dissipation, high-frequency drive system, and low-resistance field effect tube.

GoolRC 80A Brushless ESC Waterproof Demonstration

Billede: The GoolRC 80A Brushless ESC shown with water splashing, demonstrating its waterproof capability for use in various conditions.

Pakkens indhold

Pakken indeholder:

  • 1 x GoolRC 80A Brushless Electronic Speed Controller

Opsætning og installation

Tilslutning af ESC

Follow these steps to correctly connect the ESC to your RC vehicle's components:

  1. Tilslut til batteri: Connect the red and black power wires from the ESC to your battery. Ensure correct polarity (red to positive, black to negative). The ESC supports 4-12 cell Ni-MH or 2-4S Li-po batteries.
  2. Tilslut til motor: Connect the three motor wires from the ESC to your brushless motor. The order of connection may affect motor rotation direction; if the motor spins in the wrong direction, swap any two of the three wires.
  3. Tilslut til modtager: Plug the small signal cable from the ESC into the throttle channel (usually channel 2) on your RC receiver.
  4. Afbryderen: Ensure the power switch is accessible for easy on/off control.
GoolRC 80A Brushless ESC Connection Points

Billede: A diagram showing the various connection points of the GoolRC 80A ESC, including connections for the battery, receiver, motor, and the power switch.

GoolRC 80A Brushless ESC with RC Cars

Billede: The GoolRC 80A Brushless ESC displayed alongside various 1/10 scale RC car types, indicating its compatibility.

Operation

Indledende opstart

  1. Sørg for, at alle forbindelser er sikre.
  2. Turn on your RC transmitter.
  3. Tilslut batteriet til ESC.
  4. Turn on the ESC using its power switch.
  5. The ESC will emit a series of beeps indicating battery cell count (for Li-po) and readiness.
  6. Test throttle response gently. If the motor spins in the wrong direction, power off, disconnect the battery, and reverse two of the motor wires.

Beskyttelsesfunktioner

The ESC is equipped with several protection features:

  • Lav voltage Cut-off Protection: Automatically reduces or cuts off power to prevent over-discharge of the battery.
  • Overophedningsbeskyttelse: Reduces power or shuts down if the ESC temperature exceeds safe limits.
  • Beskyttelse mod gasspjældsignal: Shuts down the motor if the throttle signal is lost for a short period.
  • Motor Blocked Protection: Protects the ESC and motor if the motor becomes jammed.

Programmering

The GoolRC 80A Brushless ESC can be programmed using a compatible pocket-sized program card (sold separately). Refer to the program card's instruction manual for detailed programming steps and available parameters.

Common programmable parameters may include:

  • Battery type (Li-po/Ni-MH)
  • Lav voltage cut-off threshold
  • Start mode (punch)
  • Maksimal bremsekraft
  • Drag brake force
  • Neutral rækkevidde

Opretholdelse

To ensure the longevity and performance of your ESC:

  • Undersøg regelmæssigt alle ledninger og stik for skader eller løse forbindelser.
  • Keep the ESC clean from dirt, dust, and debris. Although waterproof, it is recommended to clean it after use in wet conditions.
  • Ensure adequate airflow around the ESC, especially during operation, to aid in heat dissipation.
  • Opbevar ESC'en et tørt og køligt sted, når den ikke er i brug.

Fejlfinding

If you encounter issues with your GoolRC 80A Brushless ESC, consider the following:

  • Ingen strøm: Check battery connection, battery charge level, and ESC power switch.
  • Motoren reagerer ikke: Verify receiver connection, transmitter power, and throttle trim settings. Ensure motor wires are correctly connected.
  • Motoren kører i den forkerte retning: Reverse any two of the three motor wires.
  • Overophedning af ESC: Check for proper motor sizing, gear ratio, and ensure adequate ventilation. Reduce load if necessary.
  • Sudden Power Cut-off: This may indicate low voltage cut-off (recharge battery) or over-heat protection (allow ESC to cool).
  • Uregelmæssig adfærd: Check for loose connections, interference, or damaged components.

Specifikationer

ParameterVærdi
Kontinuerlig strøm80A
Sprængstrøm480A
Batterikompatibilitet4-12 cell Ni-MH / 2-4S Li-po
BEC Output Voltage6.1V/3A
Modstand0.0005 ohm
Velegnet til1:10 RC car
Dimensioner (L*B*H)51 mm * 40 mm * 40 mm (2.0 tommer * 1.6 tommer * 1.6 tommer)
Vægt84 g (3.0 oz)
ModelnummerHRN9616310361626MB

Motor Compatibility (Sensorless Brushless Motor)

  • For 2S Li-po or 6S Ni-MH battery:
    • Off-road/Buggy/On-road Car: 3670-size or smaller motor with KV < 3000
  • For 3S Li-po or 9S Ni-MH battery:
    • On-road Car: 3670-size or smaller motor with KV < 3000
    • Off-road/Buggy: 3670-size or smaller motor with KV < 2500
GoolRC 80A Brushless ESC Dimensions

Billede: A diagram showing the physical dimensions of the GoolRC 80A Brushless ESC, with measurements in millimeters and inches.

Garanti og support

For warranty information and technical support, please contact GoolRC customer service through the retailer where the product was purchased or visit the official GoolRC webwebsted. Gem venligst din købsbevis til garantikrav.

GoolRC Official Store: GoolRC Store on Amazon