EGLO 98187

Eglo 98187 Solar Wall Light Instruction Manual

Model: 98187 | Brand: EGLO

1. Introduktion

Thank you for choosing the Eglo 98187 Solar Wall Light. This outdoor spotlight is designed to provide illumination in garden areas, patios, or entrances where electrical wiring is not readily available. Featuring an integrated motion sensor and an external solar panel, it offers convenience, security, and energy efficiency. Please read this manual carefully before installation and use to ensure proper operation and longevity of your product.

Eglo 98187 Solar Wall Light illuminating a wall at dusk, with its solar panel placed on a bush.

Figure 1: Eglo 98187 Solar Wall Light in an outdoor setting.

2. Sikkerhedsinstruktioner

  • Ensure the product is installed on a stable surface and in a location where it will not be easily damaged.
  • Do not attempt to modify or disassemble the light or solar panel. This may void the warranty and pose a safety risk.
  • Hold solpanelet rent for at sikre optimal opladningsydelse.
  • This product is designed for outdoor use and has an IP44 rating, meaning it is protected against solid objects larger than 1mm and splashing water from any direction. However, do not submerge it in water.
  • Bortskaf batterier ansvarligt i henhold til lokale regler.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

  • 1 x Eglo 98187 Solar Wall Light unit with integrated LED board
  • 1 x External Solar Panel
  • Monteringsudstyr (skruer, vægdyvler)
  • Instruktionsmanual

4. Specifikationer

MærkeEglo
Modelnummer98187
MaterialePlast
FarveSort
Produktmål (L x B x H)15.5 x 11 x 14.5 cm
Varens vægt510 gram
IP-vurderingIP44
LyskildeIntegreret LED
Lysstrøm150 lumen
Magt2 watt
Farvetemperatur3000 Kelvin (varm hvid)
Voltage1.2 volt
Batteri3 AA (inkluderet)
Særlige funktionerMotion Sensor, Water Resistant, Automatic On/Off
Diagram showing the dimensions of the Eglo 98187 solar wall light and its separate solar panel.

Figur 2: Produktdimensioner.

5. Opsætning og installation

Follow these steps to install your Eglo 98187 Solar Wall Light:

  1. Vælg en placering: Select a wall or surface for the light unit and a separate location for the solar panel. The solar panel requires direct sunlight for at least 6 hours daily to fully charge the battery. Avoid shaded areas.
  2. Monter lysenheden:
    • Mark the drilling points on the wall using the light unit as a template.
    • Bor huller og isæt de medfølgende vægdyvler.
    • Secure the light unit to the wall using the provided screws.
    Close-up of the back of the Eglo 98187 light unit showing mounting holes, screws, and the AUTO/OFF/ON switch.

    Figure 3: Mounting points and switch on the light unit.

  3. Monter solpanelet:
    • Position the solar panel in a location that receives maximum direct sunlight throughout the day.
    • Mark and drill holes, then secure the solar panel bracket using the provided screws.
    • Juster solpanelets vinkel for at optimere soleksponeringen.
    Side view of the Eglo 98187 solar wall light showing the connection cable between the light unit and the separate solar panel.

    Figure 4: Solar panel and light unit connection.

  4. Tilslut solpanelet: Plug the cable from the solar panel into the input port on the light unit. Ensure the connection is secure.
  5. Indledende opkrævning: Allow the solar panel to charge the battery for at least 24-48 hours in direct sunlight before first use to ensure optimal performance.
Diagram illustrating the installation steps for the Eglo 98187 solar wall light, showing how to mount both the light and the solar panel, and connect them.

Figure 5: Installation diagram.

6. Betjeningsvejledning

The Eglo 98187 Solar Wall Light features a multi-function switch and an integrated motion sensor.

  1. Switch-indstillinger: Locate the switch on the back of the light unit (refer to Figure 3). It typically has three positions: AUTO, OFF, and ON.
    • BIL: This is the recommended setting. The light will automatically turn on at dusk when motion is detected within its range. It will turn off after a set period of no motion.
    • OFF: The light will remain off, regardless of motion or ambient light. Use this setting for storage or if you do not wish for the light to operate.
    • PÅ: The light will remain continuously on at night until the battery drains or dawn breaks. This setting is not recommended for daily use as it will deplete the battery quickly.
  2. Bevægelsessensor: The integrated motion sensor has a detection angle of 90 degrees and a range of up to 8 meters. Ensure the sensor is not obstructed for optimal performance.
  3. Automatisk drift: In AUTO mode, the light charges during the day via the solar panel. At night, it will activate when motion is detected, providing illumination for safety and convenience.
Front view of the Eglo 98187 solar wall light, showing the LED array and the motion sensor below it.

Figur 6: Forside view of the light unit with LED and motion sensor.

7. Vedligeholdelse

Regular maintenance ensures optimal performance and extends the lifespan of your solar wall light.

  • Rengøring af solpanelet: Tør solpanelet regelmæssigt af med en blød kludamp klud til at fjerne støv, snavs eller affald. Et rent panel sikrer effektiv opladning.
  • Cleaning the Light Unit: Clean the light unit and motion sensor lens with a soft, dry cloth. Avoid abrasive cleaners or solvents.
  • Udskiftning af batteri: The light uses 3 AA batteries. While included, these are typically rechargeable and designed for long-term use. If the light's performance significantly degrades over time (e.g., shorter illumination time), the rechargeable batteries may need replacement. Use only rechargeable AA batteries of the same type and capacity.
  • Sæsonjusteringer: In winter months or periods of reduced sunlight, ensure the solar panel is free of snow or ice and adjust its angle if necessary to capture maximum available light.

8. Fejlfinding

If your Eglo 98187 Solar Wall Light is not functioning as expected, try the following solutions:

  • Lyset tændes ikke om natten:
    • Sørg for, at kontakten er indstillet til AUTO.
    • Verify the solar panel is clean and receiving at least 6 hours of direct sunlight daily.
    • Check the connection cable between the solar panel and the light unit.
    • The battery may be depleted. Allow several days of full sunlight charging.
  • Bevægelsessensoren registrerer ikke:
    • Sørg for, at sensorlinsen er ren og uhindret.
    • Verify the light is installed within the recommended detection range (up to 8 meters).
    • Test the sensor by walking directly in front of it at night.
  • Light stays on continuously or flashes:
    • Sørg for, at kontakten er indstillet til AUTO, not ON.
    • Insufficient charge can sometimes cause erratic behavior. Allow for more charging time.

9. Garanti og support

EGLO products are manufactured to high-quality standards. For warranty information, please refer to the documentation provided at the time of purchase or visit the official EGLO website. If you encounter any issues that cannot be resolved using the troubleshooting guide, please contact EGLO customer support or your retailer for assistance.

EGLO Contact Information:
Besøg venligst www.eglo.com for regional contact details and support.

© 2023 EGLO. Alle rettigheder forbeholdes.