Hicon Ice Maker with LED Display and 2-in-1 Water Dispenser

Indledning

Thank you for choosing the Hicon Ice Maker with 2-in-1 Water Dispenser. This appliance is designed to provide convenient access to ice and cold water. Please read this manual thoroughly before operating the unit to ensure safe and efficient use. Keep this manual for future reference.

Sikkerhedsinstruktioner

• Sørg for, at apparatet er placeret på en stabil, plan overflade væk fra direkte sollys og varmekilder.
• Apparatet, netledningen eller stikket må ikke nedsænkes i vand eller andre væsker.
• Hold børn væk fra apparatet under drift.
• Brug kun drikkevand i ismaskinen.
• Tag stikket ud af apparatet før rengøring eller når det ikke er i brug i længere perioder.
• Do not operate the appliance with a damaged cord or plug. Contact qualified service personnel for repairs.
• Ensure proper ventilation around the unit. Maintain at least 10 cm of space around the sides and back.

Produkt overview

Familiarize yourself with the components of your Hicon Ice Maker.

Figur 1: Kontrolpanellayout
This image displays the control panel with buttons for power, ice size selection (Small, Medium, Large), and water dispensing. Indicator lights show when the ice basket is full, water is needed, or the unit is powered on.

Figure 2: Bullet-Shaped Ice Production
The ice maker produces popular bullet-shaped ice cubes, shown here with a water bottle installed on top for automatic water supply.

Opsætning

Udpakning og placering

1. Remove all packaging materials and inspect the unit for any damage.
2. Place the ice maker on a firm, level surface. Ensure there is adequate ventilation around the unit (at least 10 cm clearance on all sides).
3. Allow the unit to stand upright for at least 2-4 hours before plugging it in, especially if it was transported horizontally. This allows the refrigerant to settle.

Tilsætning af vand

The Hicon Ice Maker offers two methods for water supply:

Figure 3: Water Filling Methods
The left side shows automatic water addition using a 5-gallon bottle. The right side shows manual water addition by pouring water into the reservoir.

1. Automatic Water Supply (using a water bottle): Place a standard 2, 3, or 5-gallon water bottle onto the top dispenser opening. Ensure the bottle is securely seated.
2. Manuel vandforsyning: Open the top lid and pour potable water directly into the water reservoir until it reaches the maximum fill line. Do not overfill.

Note: The melted ice water is recycled back into the reservoir for subsequent ice production cycles.

Betjeningsvejledning

1. Tænd: Plug the appliance into a grounded electrical outlet. Press the ON/OFF button on the control panel to start the unit.
2. Vælg isstørrelse: Tryk på ICE CUBE SIZE SELECTION button repeatedly to cycle through the available ice sizes: Small (S), Medium (M), and Large (L). The corresponding indicator light will illuminate.
3. Isproduktion: The unit will begin the ice-making cycle. The first batch of ice may take 6-10 minutes. Subsequent batches will be produced continuously.
4. Is fuld indikator: Når iskurven er fuld, IS FULDT indicator light will illuminate, and the machine will pause ice production. Remove ice to resume operation.
5. Vand Shortage Indikator: If the water reservoir is low, the VAND SHORTAGE indicator light will illuminate. Add more water using either the automatic or manual method.
6. Dispense Cold Water: To dispense cold water, place a glass under the cold water tap and press the VAND button. The water nozzle can be extended and retracted.
7. Sluk: Tryk på ON/OFF knappen for at slukke for apparatet.

Note: The ice produced can remain in the basket for approximately 1-2 hours if the machine is turned off, but it is not a freezer and ice will eventually melt.

Opretholdelse

Rensning

1. Før rengøring: Always unplug the ice maker from the power outlet.
2. Indvendig rengøring: Remove the ice basket. Clean the interior of the water reservoir and ice-making components with a soft cloth dampened with a mild detergent solution. Rinse thoroughly with clean water.
3. Udvendig rengøring: Tør den ydre overflade af med en blød,amp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
4. Dræning: Periodically drain any remaining water from the reservoir using the drain plug located at the bottom or back of the unit (refer to specific model for exact location).
5. Anbefaling for første brug: For best taste, clean the unit thoroughly before its first use.

Opbevaring

Hvis ismaskinen ikke skal bruges i længere tid, skal alt vand tømmes, enheden rengøres og tørres helt, før den opbevares køligt og tørt.

Fejlfinding

Specifikationer

• Mærke: Hicon
• Model: B07S3JLSKY
• Produktmål (D x B x H): 35.7 cm x 42.3 cm x 45.2 cm
• Isproduktionskapacitet: Up to 25 kg per 24 hours
• Isopbevaringskapacitet: 1.2 kg
• Wattage: 160 watt
• Voltage: 220 volt
• Kølemiddel: R600a
• Materiale Type: Plast
• UPC: 195893458158

Figur 4: Produktmål
This diagram illustrates the physical dimensions of the ice maker for placement and installation planning.

Garanti og support

The Hicon Ice Maker comes with a et års garanti fra købsdatoen. Denne garanti dækker fabrikationsfejl under normale brugsforhold.

For warranty claims, technical support, or any questions regarding your product, please contact Hicon customer service. Please have your model number (B07S3JLSKY) and proof of purchase ready when contacting support.

Hicon has over 10 years of experience in developing ice machines, ensuring advanced ice-making technology and excellent quality.