Wolf CGW-2/14/100L gaskondenserende kedel brugermanual

1. Introduktion

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Wolf CGW-2/14/100L gas condensing boiler. Please read it thoroughly before installation or use and retain it for future reference. The Wolf CGW-2/14/100L is an integrated heating system composed of the CGB-2 gas condensing boiler with a stainless steel hot water heat exchanger and a stratified stainless steel storage tank with special insulation.

2. Sikkerhedsinstruktioner

Overhold altid følgende sikkerhedsforanstaltninger for at forhindre personskade eller skade på apparatet.

• Kvalificeret personale: Installation, maintenance, and repair must only be carried out by qualified and authorized personnel.
• Gassikkerhed: In case of a gas leak, immediately shut off the gas supply, open windows and doors, and do not operate any electrical switches. Contact your gas supplier and a qualified technician.
• Elektrisk sikkerhed: Ensure the appliance is properly grounded. Do not touch electrical components with wet hands. Disconnect power before any service.
• Varme overflader: The boiler and associated piping can become hot during operation. Avoid direct contact to prevent burns.
• Ventilation: Ensure adequate ventilation in the installation area as required by local regulations.
• Brandfarlige materialer: Do not store flammable materials near the boiler.

3. Produktet er slutview

The Wolf CGW-2/14/100L combines a high-efficiency gas condensing boiler with an integrated hot water storage tank, designed for optimal space utilization and energy performance.

Image showing the front view of the Wolf CGW-2/14/100L gas condensing boiler. The unit is white with a dark control panel visible on the lower left, displaying temperature and operational status. To the right, an integrated storage tank is visible.

Nøglekomponenter:

• Gas Condensing Boiler (CGB-2): High-efficiency unit for heating.
• Stainless Steel Hot Water Heat Exchanger: For domestic hot water production.
• Stratified Stainless Steel Storage Tank (100L): Ensures rapid and efficient hot water availability.
• Integreret kontrolpanel: For setting and monitoring operational parameters.

4. Opsætning og installation

Installation of the Wolf CGW-2/14/100L must be performed by a certified heating engineer in accordance with all local and national regulations, including gas, electrical, and plumbing codes.

Installationstrin (Overview):

1. Forberedelse af webstedet: Ensure the installation location meets space, ventilation, and structural requirements.
2. Montering: Securely mount the boiler unit to the wall.
3. Hydrauliske forbindelser: Connect heating flow and return, cold water inlet, and hot water outlet.
4. Gasforbindelse: Connect the gas supply line. This must be leak-tested.
5. Flue Gas System: Install the appropriate flue gas exhaust system.
6. Elektriske forbindelser: Connect the power supply and control wiring.
7. Filling and Venting: Fill the heating system with water and vent all air.
8. Indledende opstart: Perform initial startup and functional checks according to manufacturer guidelines.

5. Betjeningsvejledning

The integrated control panel allows for easy adjustment of heating and hot water settings.

5.1. Tænd/sluk

• At tænde: Ensure the gas supply is open and the electrical power is connected. Press the power button on the control panel. The display will illuminate.
• At slukke: Press and hold the power button until the display turns off. For complete shutdown, also close the gas supply and disconnect electrical power.

5.2. Temperaturjustering

• Opvarmningstemperatur: Use the navigation buttons on the control panel to access the heating settings. Adjust the desired flow temperature or room temperature (if an external thermostat is connected).
• Domestic Hot Water Temperature: Navigate to the hot water settings on the control panel. Set the desired hot water temperature.

5.3. Kontrolpanel overview

The digital display provides information on current operating status, temperatures, and any error messages. Refer to the detailed control panel section in the full manufacturer's manual for specific icon and menu navigation instructions.

6. Vedligeholdelse

Regular maintenance ensures the longevity, efficiency, and safe operation of your Wolf CGW-2/14/100L boiler.

• Årlig service: Have the boiler inspected and serviced annually by a qualified technician. This includes cleaning the heat exchanger, checking combustion, and verifying safety devices.
• Systemtryk: Regularly check the system pressure on the boiler's display or pressure gauge. It should typically be between 1.0 and 2.0 bar. If low, repressurize the system according to manufacturer instructions or contact a technician.
• Visuel inspektion: Periodically check for any visible leaks, corrosion, or unusual noises.
• Rensning: Clean the exterior of the boiler with a soft, damp klæde. Brug ikke slibende rengøringsmidler.

7. Fejlfinding

This section provides solutions for common issues. For complex problems or if you are unsure, always contact a qualified service technician.

8. Specifikationer

Technical data for the Wolf CGW-2/14/100L gas condensing boiler.

9. Garanti og support

Wolf products are manufactured to high quality standards and come with a manufacturer's warranty. Please refer to the warranty documentation provided with your appliance for specific terms and conditions.

Kundesupport:

For technical assistance, spare parts, or warranty claims, please contact your authorized Wolf dealer or a certified service partner. You can also visit the official Wolf webhjemmeside for yderligere information og kontaktoplysninger.

• Fabrikant Webwebsted: www.wolf.eu (Eksamplinket, bekræft venligst det officielle webwebsted)
• Servicekontakt: Refer to your local dealer information.