Salter 355 BKXCDU

Salter Digital Kitchen Timer

Model: 355 BKXCDU

Brugermanual

Indledning

This manual provides instructions for the Salter Digital Kitchen Timer, Model 355 BKXCDU. This versatile timer features both count-up and count-down functions, an adjustable loud beeper, and a clear LCD display. It is designed for ease of use in various kitchen environments, offering magnetic attachment or self-standing placement.

Opsætning

Installation af batteri

The Salter Digital Kitchen Timer requires 2 AA batteries (included). To install or replace batteries:

  1. Find batteridækslet på bagsiden af ​​timeren.
  2. Skub dækslet nedad for at åbne.
  3. Isæt 2 AA-batterier, og sørg for at polerne vender korrekt (+/-) som angivet inde i batterirummet.
  4. Sæt batteridækslet på igen ved at skubbe det opad, indtil det klikker på plads.
Back of the Salter Digital Kitchen Timer showing the battery compartment and magnetic pads.

Billede: Tilbage view of the timer, highlighting the battery compartment and magnetic pads for attachment.

Første gang tændt

After battery installation, the timer display will automatically turn on. If the display does not appear, check battery polarity or replace with fresh batteries.

Betjeningsvejledning

Indstilling af timeren (nedtælling)

To set a specific time for the count-down function:

  1. Tryk på TIME knappen for at indstille de ønskede timer.
  2. Tryk på MIN knappen for at indstille de ønskede minutter.
  3. Tryk på SEC knappen for at indstille de ønskede sekunder.
  4. The maximum setting is 19 hours, 59 minutes, and 59 seconds.
  5. Når den ønskede tid er indstillet, skal du trykke på START/STOP button to begin the count-down.
  6. To pause the count-down, press START/STOP igen. Tryk én gang til for at genoptage.
  7. When the timer reaches zero, an alarm will sound. Press START/STOP for at dæmpe alarmen.
A hand pressing the 'MIN' button on the Salter Digital Kitchen Timer.

Billede: A hand demonstrating how to press the minute button to set the timer.

Count-Up Function

To use the timer as a stopwatch (count-up function):

  1. Ensure the timer display shows "0:00:00". If not, press TIME, MIN, og SEC simultaneously to reset.
  2. Tryk på START/STOP button to begin counting up from zero.
  3. For at sætte optællingen på pause, tryk på START/STOP igen. Tryk én gang til for at genoptage.
  4. The count-up function can track time up to 19 hours, 59 minutes, and 59 seconds.

Hukommelsesfunktion

The timer features a memory function to recall the last set count-down time. After the timer has counted down and the alarm has sounded (or if you stop it mid-countdown and reset to zero), pressing the TIME og MIN buttons simultaneously will recall the previous count-down setting.

Adjusting Beeper Volume

The timer has 3 adjustable volume levels for the alarm. A dedicated button on the side of the timer allows you to cycle through the volume settings (Low, Medium, High). Select the volume level appropriate for your environment.

Placeringsmuligheder

The Salter Digital Kitchen Timer offers flexible placement options:

  • Magnetisk fastgørelse: The back of the timer is equipped with strong magnets, allowing it to be securely attached to metallic surfaces such as refrigerators or oven doors.
  • Selvstændig: A built-in stand on the back allows the timer to be placed upright on any flat surface, such as a kitchen counter or table.
Salter Digital Kitchen Timer magnetically attached to the side of an oven.

Billede: Timer magnetically attached to an oven for convenient viewing.

Salter Digital Kitchen Timer standing on a kitchen counter next to a cutting board.

Billede: Timer standing upright on a kitchen counter, demonstrating its self-standing capability.

Opretholdelse

Rensning

For at rengøre din timer skal du tørre den af ​​med en blød kludamp cloth. Do not use abrasive cleaners or immerse the timer in water, as this can damage the electronic components.

Udskiftning af batteri

When the display becomes dim or the timer functions erratically, it is time to replace the batteries. Follow the battery installation steps outlined in the "Setup" section.

Fejlfinding

  • Timer does not turn on or display is blank:
    Check if the batteries are inserted correctly with the correct polarity. Replace the batteries with new AA batteries if necessary.
  • Alarm is too quiet or too loud:
    Adjust the volume using the dedicated volume button on the side of the timer. Cycle through the 3 available volume levels to find your preferred setting.
  • Timeren reagerer ikke på tryk på knapper:
    Ensure the batteries are not depleted. Try replacing them. If the issue persists, reset the timer by removing and reinserting the batteries.
  • Difficulty setting the time:
    Ensure you are pressing the HOUR, MIN, and SEC buttons individually to adjust the respective values. To reset the timer to zero, press HOUR, MIN, and SEC simultaneously.

Specifikationer

  • Modelnummer: 355 BKXCDU
  • Farve: Sort
  • Materiale: Plast
  • Produktdimensioner: 3 cm D x 8 cm B x 5.8 cm H (1.18 cm D x 3.15 cm B x 2.28 cm H)
  • Varens vægt: 0.13 kilo (4.6 ounce)
  • Batterier: 2 x AA -batterier (medfølger)
  • Skærmstørrelse: 7.9 centimeter
  • Maximum Timer Duration: 19 timer, 59 minutter, 59 sekunder
  • Beeper Volume Levels: 3 (Justerbar)
Salter Digital Kitchen Timer with dimensions labeled as 7.5cm width and 6cm height.

Billede: Front view of the timer with approximate width (7.5cm) and height (6cm) dimensions indicated.

Garanti

This Salter Digital Kitchen Timer comes with a 2 års garanti from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, or unauthorized modifications.

Kundesupport

For further assistance, troubleshooting, or warranty inquiries, please visit the official Salter website or contact their customer service department. Refer to the product packaging or the Salter webhjemmeside for de seneste kontaktoplysninger.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.