CHENXI CX-907 Chronograph Watch

Indledning

Thank you for choosing the CHENXI CX-907 Chronograph Watch. This timepiece combines classic design with modern functionality, featuring a precise quartz movement, chronograph capabilities, and a date display. To ensure optimal performance and longevity, please read this manual carefully before using your watch.

Urkomponenter

Familiarize yourself with the main components of your CHENXI CX-907 watch:

• Krone: Bruges til indstilling af tid og dato.
• Pushere (A & B): Bruges til at betjene kronograffunktionen.
• Time-, minut-, sekundviser: For displaying the current time.
• Kronograf-underskiver: Mål forløbet tid.
• Datovindue: Viser den aktuelle dato.
• Lysende markører: Provide visibility in low light conditions.

Billede: Forside view of the CHENXI CX-907 watch, showing the main dial, sub-dials, hands, and crown.

Opsætning

1. Indstilling af tid

1. Træk kronen ud til position 2 (den yderste position).
2. Rotate the crown to move the hour and minute hands until the desired time is set. Ensure AM/PM is correctly observed if setting the date.
3. Push the crown back into position 0 (normal position) to start the watch.

2. Indstilling af datoen

1. Træk kronen ud til position 1 (det første klik).
2. Drej kronen med eller mod uret (afhængigt af urværket) for at indstille den korrekte dato.
3. Når datoen er indstillet, skal du skubbe kronen tilbage til position 0.
4. Note: Avoid setting the date between 9 PM and 3 AM, as this can interfere with the automatic date change mechanism. If the date needs adjustment during this period, first set the time outside this range, adjust the date, then reset the time.

3. Justering af armbåndet

The watch features a 316 solid steel strap with a butterfly double snap buckle. For proper fit, links may need to be added or removed by a qualified watch technician.

Image: Close-up of the watch's butterfly double snap buckle and solid steel strap.

Betjening af kronografen

Kronograffunktionen giver dig mulighed for at måle den forløbne tid uafhængigt af hovedtidsvisningen.

1. Starte: Press pusher A (top pusher) to start the chronograph. The chronograph second hand and sub-dials will begin to move.
2. Stop: Press pusher A again to stop the chronograph. The elapsed time will be displayed on the sub-dials.
3. Nulstil: After stopping the chronograph, press pusher B (bottom pusher) to reset all chronograph hands to their zero positions.
4. Intermediate Time (Split Time): Some chronographs allow for split time measurement. If your model supports this, press pusher B during measurement to temporarily stop the display while the timing continues internally. Press B again to catch up. Consult a watch specialist if unsure.

Opretholdelse

1. Vandtæthed (30M)

Your CHENXI CX-907 watch is water-resistant to 30 meters (3 ATM). This rating means it is suitable for daily use and can withstand splashes or brief immersion in water. It is not suitable for swimming, showering, diving, or any activities involving prolonged water exposure or high-pressure water. Sørg altid for, at kronen er helt trykket ind for at opretholde vandtætheden.

2. Rensning

Wipe the watch case and bracelet regularly with a soft, dry cloth to remove dust and dirt. For stubborn grime, a slightly damp en klud kan bruges, efterfulgt af øjeblikkelig tørring. Undgå at bruge kemiske rengøringsmidler eller slibende materialer.

3. Udskiftning af batteri

The watch is powered by a quartz movement (PE90). When the battery runs low, the watch may stop or the second hand may jump in irregular intervals. Battery replacement should be performed by a qualified watch technician to ensure proper sealing and maintain water resistance.

Billede: Bagside view of the CHENXI CX-907 watch, displaying the stainless steel back with brand and water resistance details.

Fejlfinding

• Uret kører ikke:

  Check if the crown is fully pushed in. If it is, the battery may need replacement. Consult a watch technician.

• Forkert tidspunkt/dato:

  Refer to the "Setting the Time" and "Setting the Date" sections. Ensure the crown is fully pushed in after adjustment.
• Kronografviserne nulstilles ikke:

  This may indicate a need for calibration or service. Avoid forcing the pushers. A watch technician can usually recalibrate the chronograph hands.

• Kondensation inde i krystallen:

  This indicates a loss of water resistance. Avoid further contact with water and seek immediate professional service to prevent damage to the movement.

Specifikationer

Garanti og support

This product comes with a shop guarantee. For any issues, repairs, or further assistance, please contact the retailer or authorized service center where you purchased the watch. Always retain your proof of purchase for warranty claims.

For general inquiries or technical support, refer to the contact information provided by your seller.