Alfred DB2 Smart Dørlås Deadbolt Touchscreen Tastatur Brugermanual

1. Introduktion

This manual provides detailed instructions for the installation, setup, operation, and maintenance of your Alfred DB2 Smart Door Lock Deadbolt Touchscreen Keypad. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Billede 1.1: Forside view of the Alfred DB2 Smart Door Lock keypad.

2. Sikkerhedsoplysninger

Overhold følgende sikkerhedsforanstaltninger for at forhindre skader på produktet eller personskade på dig selv eller andre:

• Forsøg ikke at skille låsen ad eller ændre den. Dette kan forårsage skade og ugyldiggøre garantien.
• Use only the specified battery type (4 AA alkaline batteries). Do not mix old and new batteries or different battery types.
• Opbevar alle komponenter, især små dele, utilgængeligt for børn.
• Sørg for, at dørkarmen og døren er strukturelt solide og korrekt justeret inden installation.
• Protect the keypad from excessive moisture and direct water exposure.

Image 2.1: The Alfred DB2 lock is designed with weather resistance, but avoid excessive moisture.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

• Alfred DB2 Smart Door Lock (Exterior Keypad Assembly)
• Indvendig deadbolt-samling
• Dødbolt lås
• Slagplade
• Monteringsudstyr (skruer, bolte)
• 3 Faceplates (various finishes)
• 4 AA alkaliske batterier (forinstalleret eller medfølger separat)
• Installation Guide / Template

4. Installation

The Alfred DB2 is designed for easy installation. Ensure your door meets the following specifications:

• Standard 2-1/8 inch (54mm) hole for the deadbolt.
• Adjustable latch bolt for 2-3/8 inch (60mm) or 2-3/4 inch (70mm) backset.
• Door thickness between 1-3/8 inches (35mm) and 2 inches (50mm).

Installationstrin:

1. Forbered døren: If replacing an existing deadbolt, remove it. Use the provided template to ensure correct hole alignment if installing on a new door.
2. Installer deadbolt-låsen: Insert the deadbolt latch into the door edge. Ensure the 'UP' arrow is facing upwards. Secure with screws.
3. Installer det udvendige tastatur: Før kablet fra det udvendige tastatur gennem dørhullet, og placer tastaturet, så det flugter med døren.
4. Installer den indvendige monteringsplade: Route the cable through the mounting plate. Secure the mounting plate to the exterior keypad using the provided screws.
5. Tilslut kablet: Connect the cable from the exterior keypad to the interior deadbolt assembly.
6. Install the Interior Deadbolt Assembly: Position the interior assembly over the mounting plate, ensuring the thumb turn spindle engages with the deadbolt latch. Secure with screws.
7. Installer batterier: Insert the 4 AA batteries into the interior assembly's battery compartment.
8. Test drift: Manually test the deadbolt with the thumb turn.

Billede 4.1: Interiør view of the Alfred DB2 Smart Door Lock, showing battery compartment and thumb turn.

Image 4.2: The Alfred DB2 Smart Door Lock installed on a door, viewed fra det indre.

5. Indledende opsætning og programmering

After installation, the lock requires initial setup. The lock provides voice prompts to guide you.

5.1. Master Pin Code Creation

The first step is to create a Master Pin Code. This code is essential for programming and managing other user codes and lock settings.

1. Tryk på tastaturet for at aktivere det.
2. Tryk på # knap.
3. Enter a 4-10 digit Master Pin Code.
4. Tryk på # knappen for at bekræfte.
5. Re-enter the Master Pin Code.
6. Tryk på # knappen for at bekræfte.

The lock will confirm successful Master Pin Code creation.

5.2. Adding User Pin Codes

You can program up to 20 unique user pin codes for family members or guests.

1. Tryk på tastaturet for at aktivere det.
2. Tryk på # knap.
3. Enter your Master Pin Code.
4. Tryk på # knap.
5. Trykke 1 (to add a user code).
6. Enter a new 4-10 digit User Pin Code.
7. Tryk på # knappen for at bekræfte.
8. Re-enter the new User Pin Code.
9. Tryk på # knappen for at bekræfte.

Repeat for additional user codes. The lock also supports single-use or timed pin codes, which can be managed via the Alfred Home App.

5.3. Bluetooth Connectivity and App Setup

The Alfred DB2 connects via Bluetooth to the Alfred Home App for enhanced control and monitoring.

1. Download Alfred Home App fra din smartphones appbutik.
2. Opret en konto eller log ind.
3. Follow the in-app instructions to add your DB2 lock. Ensure Bluetooth is enabled on your smartphone and you are within range of the lock.
4. The app allows you to manage pin codes, view access history, and control the lock remotely (with an optional Alfred Connect Wi-Fi bridge).

Image 5.1: The Alfred Home App provides control and monitoring features for your smart lock.

5.4. Z-Wave Module (Optional)

The DB2 supports an optional Z-Wave module for integration with Z-Wave compatible smart home systems. Refer to the Z-Wave module's specific instructions for pairing with your hub.

Image 5.2: Optional Z-Wave module for smart home integration.

6. Betjeningsvejledning

6.1. Oplåsning af døren

• Using a Pin Code: Touch the keypad to activate. Enter your 4-10 digit pin code followed by the # button. The deadbolt will retract.
• One-Touch Entry (Bluetooth): With your smartphone (with Alfred Home App running and Bluetooth enabled) nearby, simply touch the keypad. The lock will detect your phone and unlock.
• Via Alfred Home App: Open the app and select your lock. Use the unlock function within the app. (Requires Bluetooth proximity or Alfred Connect Wi-Fi bridge for remote access).

Image 6.1: A user interacting with the Alfred DB2 keypad for entry.

6.2. Låsning af døren

• One-Touch Låsning: Tryk og hold på # button on the keypad for 2 seconds. The deadbolt will extend.
• Automatisk genlåsning: The lock can be configured to automatically relock after a set period of time (e.g., 30 seconds) when left unattended. This setting is managed through the Alfred Home App.
• Via Alfred Home App: Open the app and select your lock. Use the lock function within the app.

6.3. Privatlivstilstand

Privacy mode blocks all user codes except the Master Pin Code, providing enhanced security when you are home. Activate this feature via the Alfred Home App or specific keypad commands (refer to app for details).

6.4. Væk tilstand

Away mode blocks all codes except the Master Pin Code and triggers an alarm if the door is opened. This feature is ideal when you are away from home. Activate this feature via the Alfred Home App or specific keypad commands (refer to app for details).

7. Vedligeholdelse

7.1. Udskiftning af batteri

The Alfred DB2 is powered by 4 AA alkaline batteries. The lock will provide low battery warnings. Replace all four batteries simultaneously when prompted.

1. Fjern batteridækslet på den indvendige del.
2. Fjern de gamle batterier.
3. Isæt fire nye AA alkaline-batterier, og sørg for at polariteten vender korrekt.
4. Sæt batteridækslet på igen.

Nødkraft: If batteries completely drain, an emergency micro USB power port is available on the exterior keypad. Connect a standard micro USB power bank to temporarily power the lock and enter your code.

7.2. Rensning

Rengør tastaturet og låsen med en blød kludamp klud. Undgå slibende rengøringsmidler eller opløsningsmidler, der kan beskadige overfladen eller de elektroniske komponenter.

8. Fejlfinding

If you encounter issues with your Alfred DB2 lock, refer to the following common problems and solutions:

If problems persist, please contact Alfred customer support for further assistance.

9. Specifikationer

• Mærke: Alfred
• Model: DB2
• Låsetype: Tastatur Deadbolt
• Speciel funktion: Nøglefri adgang
• Materiale: Metal
• Farve (som angivet)viewred.): Guld
• Dimensioner (L x B x H): 10 x 8.31 x 3.88 tommer
• Varens vægt: 4 pund
• Strømkilde: 4 AA alkaliske batterier (inkluderet)
• Nødkraft: Micro USB port
• Kontrolmetode: App, berør
• Forbindelsesprotokol: Bluetooth, Z-Wave (optional module)
• Controller type: Amazon Alexa (with optional bridge)
• Bruger pinkoder: Op til 20
• Dørtykkelseskompatibilitet: 1-3/8" to 2" (35-50mm)
• Backset-kompatibilitet: 2-3/8" eller 2-3/4" (60 mm eller 70 mm)
• UPC: 628341330114
• Part Number / Item Model Number: TPN37879

10. Garantioplysninger

Alfred products are covered by a limited warranty. For specific warranty terms and conditions, including duration and coverage details, please refer to the warranty card included with your product or visit the official Alfred webwebsted. Gem din købsbevis til garantikrav.

11. Kundesupport

For technical assistance, troubleshooting, or general inquiries regarding your Alfred DB2 Smart Door Lock, please contact Alfred customer support. Contact information can typically be found on the Alfred website or within the Alfred Home App.