Sonew Touch-Panel Fingerprint Door Lock User Manual

1. Produktet er slutview

The Sonew Touch-Panel Fingerprint Door Lock is an advanced access control switch designed for enhanced security in homes, offices, and various commercial institutions. It features a modern touch sensor design with LED indicators, offering a convenient and reliable solution for door access.

Image 1.1: The Sonew Touch-Panel Fingerprint Door Lock, showing the main unit, connection wires, and mounting screws.

2. Pakkens indhold

Kontroller venligst, at alle nedenstående varer er inkluderet i din pakke:

• 1 x Sonew Touch-Panel Access Control Switch
• 1 x Bag of Screws (for mounting)

3. Opsætning og installation

This section provides instructions for the physical installation and initial setup of your Sonew Touch-Panel. Professional installation is recommended for optimal performance and safety.

3.1 Montering af enheden

1. Choose a suitable location near the door frame or wall where the access control switch will be easily accessible.
2. Mark the drilling points using the device as a template.
3. Bor huller på de markerede punkter. Indsæt vægankre om nødvendigt.
4. Fastgør enheden til væggen med de medfølgende skruer.

3.2 Ledningsforbindelser

The device features NO/NC/COM contact outputs for integration with various access control systems. Ensure power is disconnected before wiring.

• NEJ (normalt åben): Connect to devices that require a circuit to be closed to activate (e.g., electric strike that unlocks when power is applied).
• NC (normalt lukket): Connect to devices that require a circuit to be opened to activate (e.g., magnetic lock that unlocks when power is removed).
• COM (Fælles): The common terminal for both NO and NC connections.
• Connect the power supply (DC36V) to the appropriate terminals.

Refer to your specific door lock or access control system's wiring diagram for precise connections.

4. Betjeningsvejledning

The Sonew Touch-Panel is designed for intuitive operation.

4.1 Touch Sensor Functionality

The device operates via a sensitive touch sensor.

• When your finger touches the panel, it will output an ON or OFF signal, triggering the connected access device.
• When your finger is removed, the device returns to standby mode.

Image 4.1: A hand interacting with the touch sensor to activate the access control.

4.2 LED-indikatorlys

The device features a two-color LED light to indicate its status:

• Blå indikator: The device is in standby mode, awaiting touch input.
• Grøn indikator: The device has detected a touch and is actively sending a signal.

Image 4.2: Comparison of the blue LED (standby) and green LED (active) states of the touch panel.

5. Vedligeholdelse

To ensure the longevity and optimal performance of your Sonew Touch-Panel, follow these maintenance guidelines:

• Rensning: Wipe the acrylic panel surface with a soft, damp klud. Undgå slibende rengøringsmidler eller opløsningsmidler, der kan beskadige overfladen.
• Holdbarhed: The device is designed for durability, having passed 100,000 aging tests. However, avoid excessive force or impact.
• Miljøforhold: While the panel is waterproof and anti-dust, avoid prolonged exposure to extreme temperatures or direct water submersion.

Image 5.1: The touch panel demonstrating its waterproof and anti-dust acrylic surface.

6. Fejlfinding

If you encounter issues with your Sonew Touch-Panel, refer to the following common problems and solutions:

7. Specifikationer

8. Garanti og support

For garantioplysninger eller teknisk support, kontakt venligst din forhandler eller producenten direkte. Gem din købskvittering som købsbevis.

For further assistance, you may visit the official Sonew store on Amazon: Sonew Store