1. Introduktion
Thank you for choosing the Everbeam H6 Pro LED Headlamp. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your device. Please read it thoroughly before operation and retain it for future reference.
Image 1.1: Everbeam H6 Pro Headlamp with included accessories (USB cable and storage case).
2. Produktet er slutview
2.1 Nøglefunktioner
- 650 Lumen lysstyrke: Provides powerful illumination up to 126 meters (413 feet).
- Flere lystilstande: Includes two white light brightness levels, SOS mode, and a red light mode.
- Bevægelsessensor kontrol: Tillader håndfri betjening ved at vifte med hånden foran sensoren.
- Genopladeligt batteri: Built-in 1200mAh lithium-ion battery offers extended runtime.
- Holdbart design: IPX4 water resistance for protection against splashes and light rain.
- Let og kompakt: Weighs approximately 72g (2.5oz) for comfortable wear.
2.2 Komponenter
- Everbeam H6 Pro Headlamp
- Adjustable Elastic Headband
- USB opladningskabel
- Opbevaringskasse
Image 2.1: Headlamp and its accessories, highlighting the 1200mAh battery capacity.
2.3 Kontroller og indikatorer
Billede 2.2: Detaljeret view af hovedetamp's controls and features.
- Tænd/sluk-knap: Controls power and cycles through white light modes.
- Sensor Button: Activates/deactivates motion sensor control.
- Bevægelsessensorer: Registrerer håndbevægelser for håndfri betjening.
- Hvidt lys LED: Primær lyskilde.
- Red Light LEDs: Provides low-impact illumination, ideal for night vision preservation.
- USB opladningsport: Til genopladning af det interne batteri.
- Strømindikator: Viser batteristatus.
3. Opsætning
3.1 Indledende opladning
- Oplad hovedtelefonen helt før første brug.amp.
- Connect the supplied USB charging cable to the headlamp's USB charging port.
- Plug the other end of the cable into a standard USB power source (e.g., computer, wall adapter).
- The power indicator will show charging status (e.g., red for charging, green for fully charged).
- En fuld opladning tager typisk cirka 3 timer.
3.2 Justering af hovedbøjlen
Image 3.1: The adjustable and comfortable elastic headband.
- Placer hovedetamp på dit hoved.
- Adjust the elastic strap using the buckles on either side to achieve a snug yet comfortable fit.
- Overskriftenamp Enheden kan vippes op til 60 grader for at rette lysstrålen efter behov.
4. Betjeningsvejledning
4.1 Tænd/sluk og lystilstande
- At tænde: Tryk én gang på tænd/sluk-/tilstandsknappen. Hovedtelefonerneamp will activate in the last used white light mode.
- To Change White Light Modes: Press the Power/Mode button repeatedly to cycle through High White Light, Low White Light, and SOS White Light.
- For at aktivere rødt lys: From any white light mode, press and hold the Power/Mode button for approximately 2 seconds. The headlamp will switch to Red Light mode.
- To Change Red Light Modes: In Red Light mode, press the Power/Mode button once to switch between steady Red Light and Red Strobe.
- At slukke: Press the Power/Mode button until the light turns off, or press and hold the Power/Mode button for 2 seconds from any mode.
Billede 4.1: Hovedetamp providing 650 lumens of illumination in a dark environment.
4.2 Bevægelsessensorstyring
The motion sensor allows for convenient hands-free operation, ideal when your hands are occupied.
- To Activate Sensor Mode: Med hovedetamp on, press the Sensor button once. The sensor indicator light will illuminate.
- To Use Sensor Control: Wave your hand approximately 4-10 cm (1.5-4 inches) in front of the headlamp for at tænde eller slukke lyset.
- To Deactivate Sensor Mode: Press the Sensor button again. The sensor indicator light will turn off.
Image 4.2: Demonstrating motion sensor use for hands-free operation.
5. Vedligeholdelse
5.1 Rengøring
- Tør hovedet afamp krop med en blød, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Ensure the USB charging port cover is securely closed to maintain water resistance.
5.2 Pleje af batterier
- To prolong battery life, recharge the headlamp regularly, even if not used frequently.
- Undgå at aflade batteriet helt før genopladning.
- Opbevar hovedlamp på et køligt, tørt sted, når det ikke er i brug.
5.3 Opbevaring
- Opbevar hovedlamp in its provided case to protect it from dust and physical damage.
- Holdes væk fra direkte sollys og ekstreme temperaturer.
6. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Headlamp tændes ikke. | Lavt batteri. | Oplad hovedetamp fuldt ud. |
| Lyset er svagt eller flimrer. | Lavt batteri. | Genoplad hovedlamp. |
| Bevægelsessensoren reagerer ikke. | Sensor mode not activated. Obstruction in front of sensor. | Ensure sensor mode is active (indicator light on). Clear any obstructions. Ensure hand is within 4-10 cm range. |
| Headlamp oplader ikke. | Defekt kabel eller strømkilde. | Try a different USB cable or power adapter. Ensure cable is securely connected. |
7. Specifikationer
| Feature | Detalje |
|---|---|
| Model | H6 Pro |
| Lysstyrke (hvidt lys) | 650 lumen |
| Stråleafstand | Op til 126 meter (413 fod) |
| Batteritype | Indbygget 1200mAh litium-ion-batteri |
| Runtime (White Light High) | Ca. 2.5 timer |
| Runtime (White Light Low) | Ca. 6.5 timer |
| Køretid (rødt lys) | Op til 20 timer |
| Opladningstid | Ca. 3 timer |
| Vandmodstand | IPX4 (stænksikker) |
| Vægt | 72 g (2.5 oz) |
| Materiale | Plast |
| Dimensioner | 3.15" D x 2.37" B x 0.79" H |
Billede 7.1: Hovedetamp's IPX4 water resistance.
8. Garanti og support
8.1 Garantioplysninger
The Everbeam H6 Pro LED Headlamp kommer med en 2 års garanti fra købsdatoen. Denne garanti dækker fabrikationsfejl og udførelse under normal brug. Den dækker ikke skader forårsaget af misbrug, ulykker, uautoriserede ændringer eller normal slitage.
8.2 Kundesupport
For technical assistance, warranty claims, or any questions regarding your Everbeam H6 Pro Headlamp, please contact Everbeam customer support through the retailer's platform or the official Everbeam website. Please have your purchase receipt and product model number (H6 Pro) available when contacting support.