1. Introduktion
This manual provides comprehensive instructions for the safe and efficient installation, operation, and maintenance of your CLY 10W LED Motion Sensor Floodlight. Designed for outdoor use, this floodlight offers bright, energy-efficient illumination with intelligent motion detection capabilities.
2. Sikkerhedsinstruktioner
- Afbryd altid strømmen, før du forsøger at installere, vedligeholde eller reparere produktet.
- Sørg for korrekt jording for at forhindre elektrisk stød.
- Installationen bør udføres af en kvalificeret elektriker, hvis du er usikker på den elektriske ledningsføring.
- Se ikke direkte ind i LED-lyskilden, når den er tændt, da dette kan forårsage øjenbelastning eller skader.
- The product is rated IP66 for outdoor use, meaning it is protected against dust and powerful water jets. However, avoid submerging the unit in water.
- Hold børn væk fra produktet under installation og drift.
3. Pakkens indhold
Kontroller venligst pakken for at sikre, at alle komponenter er til stede:
- 1 x CLY 10W LED Motion Sensor Floodlight
- 1 x Set of Mounting Screws and Accessories
- 1 x brugermanual
4. Produktfunktioner
- Høj lysstyrke: 10W LED with 850 lumens output.
- Farvetemperatur: 6500K Cool White light.
- Bevægelsessensor: 180° sensing angle with a detection distance of up to 12 meters (39 feet).
- Justerbare indstillinger: Customizable lighting duration (10s, 45s, 120s, 600s) and operating mode (24 hours / night only).
- Holdbart design: IP66 waterproof and dustproof rating, suitable for various outdoor weather conditions.
- Effektiv varmeafledning: Robust aluminum alloy housing ensures optimal heat management and extended lifespan.
- Bred strålevinkel: 120° beam angle for broad illumination.
5. Opsætning og installation
Følg disse trin for korrekt installation:
- Vælg monteringssted: Select a suitable outdoor location, ideally at a height of 2.5 to 3.5 meters (8.20 to 11.48 feet) for optimal motion detection and light coverage. Ensure the area is clear of obstructions that might block the sensor's view.
- Marker borehuller: Use the floodlight's bracket as a template to mark the positions for drilling on the mounting surface.
- Bore huller: Drill holes at the marked positions. Insert wall plugs if necessary for secure mounting.
- Monter beslaget: Secure the floodlight's bracket to the mounting surface using the provided screws.
- Ledningsføring: Connect the floodlight's electrical wires to your main power supply. Ensure correct connections for Live (L), Neutral (N), and Ground (GND). Always consult local electrical codes and ensure power is off during wiring.
- Juster vinkel: Once mounted, adjust the angle of the floodlight and the motion sensor to cover the desired area. The sensor has a 180° sensing angle and can be rotated for optimal coverage.
Figure 5.1: Ideal mounting height (2.5-3.5m) and maximum detection range (12m).
Figure 5.2: The adjustable bracket allows for flexible horizontal and vertical mounting.
6. Betjeningsvejledning
The CLY LED Motion Sensor Floodlight features adjustable settings for its PIR sensor:
6.1. Lighting Time Setting (TIME)
This knob controls how long the light stays on after motion is detected. Rotate the knob to select the desired duration:
- 10S: Lyset forbliver tændt i cirka 10 sekunder.
- 45S: Lyset forbliver tændt i cirka 45 sekunder.
- 120S: Light stays on for approximately 120 seconds (2 minutes).
- 600S: Light stays on for approximately 600 seconds (10 minutes).
6.2. Operating Mode Setting (LUX)
This knob determines when the motion sensor will activate the light. Rotate the knob to choose between:
- Sun Icon (24 hours): The sensor will detect motion and activate the light both during the day and at night.
- Moon Icon (Night Only): The sensor will only detect motion and activate the light when ambient light levels are low (i.e., at night).
Figur 6.1: Detaljeret view of the TIME and LUX adjustment knobs on the motion sensor.
7. Vedligeholdelse
Regular maintenance ensures optimal performance and longevity of your floodlight:
- Rensning: Periodically wipe the floodlight and sensor lens with a soft, damp klud til at fjerne støv og snavs. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Inspektion: Regularly check for any signs of damage to the housing, wiring, or mounting bracket. Ensure all connections are secure.
- Vejrbeskyttelse: While the unit is IP66 rated, ensuring proper drainage around the installation area can further protect it from prolonged exposure to standing water.
8. Fejlfinding
If you encounter issues with your CLY LED Motion Sensor Floodlight, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | Ingen strømforsyning. LUX setting is incorrect. Sensor is blocked. | Kontroller strømtilslutning og afbryder. Adjust LUX knob to 'Sun' icon for 24-hour detection or ensure it's dark enough for 'Moon' icon setting. Fjern eventuelle forhindringer fra sensorens view. |
| Lyset forbliver tændt konstant. | TIME-indstillingen er for lang. Kontinuerlig bevægelse registreret. Ledningsfejl. | Adjust TIME knob to a shorter duration. Ensure no constant motion is within the sensor's range. Kontroller, at ledningsforbindelserne er korrekte. |
| Lyset blinker eller flimrer. | Ustabil strømforsyning. Løs ledningsforbindelse. | Kontroller strømkildens stabilitet. Inspicer og fastgør alle ledningsforbindelser. |
| Bevægelsessensor registrerer ikke. | Sensor angle incorrect. Detection distance too far. Temperature interference. | Adjust the sensor head to cover the desired area. Ensure objects are within the 12-meter detection range. Extreme temperatures can affect sensor performance. |
If the problem persists after attempting these solutions, please contact CLY customer service for further assistance.
9. Specifikationer
| Feature | Specifikation |
|---|---|
| Modelnummer | FLB010 |
| Magt | 10W |
| Lysstrøm | 850 lumen |
| Farvetemperatur | 6500K (Cool White) |
| IP-vurdering | IP66 |
| Følende vinkel | 180° |
| Detektionsafstand | Op til 12 meter (39 fod) |
| Lighting Time Settings | 10'ere, 45'ere, 120'ere, 600'ere |
| Operating Mode Settings | Day & Night / Night Only |
| Materiale | Aluminium |
| Produktmål (L x B x H) | 11.9 x 3 x 15 cm |
| Produktets vægt | 430 gram |
| Strømkilde | Elektrisk med ledning |
| Montering påkrævet | Ja |
| Batterier påkrævet | Ingen |
Figur 9.1: Produktmål (119 mm x 150 mm x 30 mm).
10. Garanti og kundesupport
CLY offers a 2 års udskiftningsservice for dette produkt.
If you encounter any issues or have questions regarding your CLY 10W LED Motion Sensor Floodlight, please do not hesitate to contact our customer service team. You can reach us via Amazon or through the service email provided in the product packaging. We aim to respond to all inquiries within 24 hours and are always ready to assist you.