PowerA Enhanced Wireless Controller for Nintendo Switch - Princess Zelda Edition Instruction Manual

Indledning

The PowerA Enhanced Wireless Controller is designed for an immersive gaming experience on your Nintendo Switch. This officially licensed controller features a distinctive Princess Zelda design, motion controls, and Advanced Gaming Buttons for enhanced gameplay. It operates wirelessly via Bluetooth and provides up to 30 hours of gameplay with new alkaline batteries.

Opsætning

1. Installer batterier

This controller requires two (2) AA alkaline batteries (included). To install:

1. Remove the battery door located on the back of the controller.
2. Isæt to (2) AA alkaliske batterier, og sørg for at polerne vender korrekt (+/-).
3. Sæt batteridækslet sikkert på plads.

2. Systemopdatering

Ensure your Nintendo Switch system is updated to version 6.0.1 or later for optimal performance with PowerA Wireless controllers.

1. Slut din Nintendo Switch til internettet.
2. From the HOME Menu, select "System Settings".
3. Scroll down to "System" and select "System Update" to check for and install any available updates.

3. Trådløs parring

To pair your controller with the Nintendo Switch:

1. Bekræft, at din Nintendo Switch-konsol er tændt.
2. From the HOME Menu, select "Controllers".
3. Then select "Change Grip and Order".
4. While the following screen is displayed, press and hold down the SYNC Button (located on the top edge of the controller, between the shoulder buttons) for at least one second on the controller you wish to pair.

Note: Once the controller is paired, it will auto-connect next time.

Betjeningsvejledning

Forståelse af LED-indikatorer

There are three LED locations on this controller: top, front, and bottom.

• The top LED near the Sync button will flash Red when the Alkaline batteries are nearing depletion. Replace Alkaline batteries once this occurs to avoid interrupting gameplay.
• The Home/View buttons indicate player number 1-8 and will flash during programming of Advanced Gaming Buttons.
• The bottom indicator players 1-8 and will light during wireless pairing.

Advanced Gaming Buttons

This controller features two Advanced Gaming Buttons (AGB) on the back, which can be programmed to replicate any standard button function.

1. Hold the Program Button (small red button on the back) down for 2-3 seconds. The LED Connection Indicator will slowly flash, signaling the controller is in program mode.
2. Press the AGB (L or R) button you wish to program.
3. Press the standard button (A, B, X, Y, L, R, ZL, ZR, D-pad, Left Stick, Right Stick) you want the AGB to replicate. The LED Connection Indicator will flash 3 times, indicating successful programming.
4. To exit program mode, hold the Program Button down for 2-3 seconds. The LED Connection Indicator will turn off.

Nulstilling af avancerede spilknapper: To reset an AGB to no function, hold the Program Button down for 2-3 seconds, then press the AGB you wish to reset for 5 seconds.

Opretholdelse

To ensure the longevity and optimal performance of your PowerA Enhanced Wireless Controller, follow these maintenance guidelines:

• Rensning: Use a soft, dry cloth to wipe down the controller. Avoid abrasive cleaners or solvents that could damage the surface.
• Opbevaring: Opbevar controlleren et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer, når den ikke er i brug.
• Batteripleje: If the controller will not be used for an extended period, remove the AA batteries to prevent potential leakage.

Fejlfinding

• My Wireless Controller is not pairing:
  1. Confirm batteries are properly installed and are not drained, used, or damaged.
  2. Confirm you are following the pairing process listed above.
  3. Fjern og udskift de alkaliske batterier for at nulstille den trådløse controller.
• Interferens: If you experience interference, try reorienting or relocating the receiving antenna, increasing the separation between the equipment and receiver, or connecting the equipment into an outlet on a circuit different from that to which the receiver is connected.

Specifikationer

Garanti og support

This PowerA Enhanced Wireless Controller comes with a 2 års begrænset garanti. For details and to register your product, please visit the official PowerA webwebsted: www.PowerA.com.

For support with your authentic PowerA accessories, please visit the Support section of PowerA.com, email CustomerService@PowerA.com, or call 1-866-308-4031 (Mon-Fri 9:00AM-5:00PM PST).

Motion Warning

Playing video games can make your muscles, joints, skin, or eyes hurt. Follow these instructions to avoid problems such as tendonitis, carpal tunnel syndrome, skin irritation, or eyestrain:

• Avoid excessive play. Take a 10 to 15 minute break every hour, even if you don't think you need it. Parents should monitor their children for appropriate play.
• Hvis dine hænder, håndled, arme eller øjne bliver trætte eller ømme, mens du spiller, eller hvis du føler symptomer som prikken, følelsesløshed, brændende eller stivhed, skal du stoppe og hvile i flere timer, før du spiller igen.
• Hvis du fortsat har nogen af ​​ovenstående symptomer eller andet ubehag under eller efter leg, skal du stoppe med at spille og søge læge.

Officielle produktvideoer