Fellowes PowerShred P-30C brugsanvisning

1. Introduktion

The Fellowes PowerShred P-30C 6 sheet Cross-Cut Deskside Paper Shredder is designed for home or office use, offering enhanced security by shredding up to 6 sheets per pass into 5/32” x 1-5/16” cross-cut particles (Security Level P-4). It can also shred staples and plastic credit cards, eliminating the need for tedious document preparation. The P-30C features a sophisticated design with a 4-gallon waste bin that holds up to 80 shredded sheets, easily emptied with a lift-off head. Its ultra-quiet performance minimizes noise, making it suitable for shared workspaces. The shredder can continuously operate for up to 3 minutes before a 40-minute cool down period is required.

Figure 1: Fellowes PowerShred P-30C

2. Opsætning

1. Pakker ud: Tag forsigtigt makulatoren ud af emballagen.
2. Placering: Place the shredder head securely on top of the waste bin. Ensure it is properly seated to allow for operation.
3. Strømtilslutning: Sæt netledningen i en almindelig stikkontakt.

3. Betjeningsvejledning

The P-30C is designed for efficient and secure shredding of various materials.

3.1 Basic Shredding

1. Tænd: Locate the control switch on the top of the shredder head. Slide it to the 'Auto' (play symbol) position. The shredder is now in standby mode.
2. Indsæt materiale: Insert up to 6 sheets of paper (20lb bond) into the paper entry slot. The shredder will automatically start and stop once the material has passed through.
3. Kontinuerlig drift: The shredder can continuously shred for up to 3 minutes. After this period, it requires a 40-minute cool-down time to prevent overheating.

Figure 2: Inserting Paper for Shredding

3.2 Acceptable Materials

• Paper (up to 6 sheets of 20lb bond paper per pass)
• Staples (standard office staples)
• Plastic Credit Cards (insert one at a time into the dedicated slot if available, or the main paper slot)

3.3 Sikkerhedsfunktioner

The Fellowes PowerShred P-30C incorporates safety features for user protection:

• SafeSense-teknologi: (If applicable, based on model features) This technology automatically stops the shredder when hands touch the paper entry, preventing injuries.
• Interlock Switch: The shredder will not operate unless the shredder head is correctly seated on the waste bin.

3.4 Produkt overview Video

Video 1: Fellowes - The World's Toughest Shredders. This video provides a general overview of Fellowes shredders and their capabilities.

4. Vedligeholdelse

4.1 Tømning af affaldsbeholderen

The 4-gallon waste bin can hold up to 80 shredded sheets. To empty:

1. Sluk: Slide the control switch to the 'Off' (circle symbol) position and unplug the shredder from the power outlet.
2. Løftehoved: Løft forsigtigt makulatorhovedet af skraldespanden.
3. Discard Contents: Empty the shredded material from the bin into a trash receptacle.
4. Udskift hoved: Place the shredder head back onto the bin, ensuring it is securely in place.

Figure 3: Emptying the Shredder Bin

4.2 Smøring af makulatoren

Regular oiling is crucial for maintaining shredder performance and extending its lifespan. Use Fellowes shredder oil or a vegetable-based oil in a non-aerosol container.

1. Påfør olie: Apply a thin bead of oil across the paper entry slot.
2. Run Shredder: Kør kompostkværnen i bakgear i 10 sekunder for at fordele olien.
3. Frekvens: Oil the shredder after every 30 minutes of accumulated shredding or at least twice a month.

5. Fejlfinding

5.1 Papirstop

Hvis der opstår papirstop:

1. Omvendt funktion: Slide the control switch to the 'Reverse' (double arrow symbol) position. This will attempt to clear the jam by backing the paper out.
2. Reducer belastning: If the jam persists, remove the shredder head, clear any visible paper, and try again with fewer sheets.

5.2 Overophedning

The shredder has a built-in thermal overload protector. If the shredder runs continuously for too long (more than 3 minutes), it may overheat and automatically shut off.

• Køl ned: Allow the shredder to cool down for approximately 40 minutes. The power light will indicate when it is ready for use again.
• Reducer belastning: To prevent future overheating, avoid exceeding the maximum sheet capacity and adhere to the recommended continuous run time.

6. Specifikationer

7. Garanti og support

7.1 Garantioplysninger

The Fellowes PowerShred P-30C comes with a 1-Year product warranty og en 3-year cutter warrantyGem venligst din købsbevis i tilfælde af garantikrav.

7.2 Kundesupport

For any questions, concerns, or technical assistance, please contact Fellowes Customer Support:

• Webwebsted: Visit the official Fellowes webwebsted for ofte stillede spørgsmål og supportressourcer.
• Telefon: Refer to the contact information provided on the product packaging or the Fellowes webwebsted for direkte support.