Moen Genta LX Two-Handle Deck Mounted Modern Roman Tub Faucet

1. Introduktion

Thank you for choosing the Moen Genta LX Two-Handle Deck Mounted Modern Roman Tub Faucet. This faucet is designed to bring a sleek, contemporary style to your bathroom with its curved edges and highly reflective chrome finish. This manual provides essential information for the proper installation, operation, and maintenance of your new faucet, ensuring years of reliable performance.

Figure 1.1: The complete Moen Genta LX two-handle Roman tub faucet in a polished chrome finish, featuring a wide, flat spout and two lever handles.

2. Sikkerhedsoplysninger

Please read all instructions carefully before installation and use. Failure to follow these instructions may result in personal injury, property damage, or product malfunction.

• Always turn off the main water supply before beginning any work on the faucet.
• Bær sikkerhedsbriller under installationen for at beskytte dine øjne.
• Hvis du er usikker på nogen del af installationen, skal du kontakte en kvalificeret VVS-installatør.
• Ensure all connections are secure and leak-free before turning on the water supply.
• Brug ikke slibende rengøringsmidler eller stærke kemikalier på forkromet overflade, da dette kan beskadige overfladen.

3. Reservedelsliste

Verify that all components are present before beginning installation. This trim kit requires a separate Moen M-PACT valve (models 4792, 4793, 4794, 4796, 4797, or 4798) for complete installation.

• Tub Faucet Trim (Spout and Handles)
• Plug-knap
• Hex Wrench (5/32”)
• Instruktionsmanual

Figure 3.1: The separate valve assembly required for the installation of the Moen Genta LX tub faucet, showing the hot and cold water inlets and the main valve body.

4. Nødvendigt værktøj

Følgende værktøjer er typisk nødvendige til installation:

• Justerbar skruenøgle
• Phillips-skruetrækker
• VVS-kit eller silikoneforsegling
• Målebånd
• Sikkerhedsbriller
• Lommelygte (valgfrit)

5. Opsætning og installation

This section outlines the general steps for installing the Moen Genta LX tub faucet trim. Refer to the specific instructions provided with your Moen M-PACT valve for valve body installation.

1. Forbered dækket: Ensure the mounting surface is clean, dry, and free of debris. The faucet requires three holes for installation.
2. Install the Valve Body: Follow the instructions provided with your Moen M-PACT valve (sold separately) to install the valve body into the tub deck. Ensure it is securely fastened and properly connected to the hot and cold water lines.
3. Install the Spout: Apply a thin bead of plumber's putty or silicone sealant around the base of the faucet spout. Insert the spout into the center hole on the tub deck. From underneath the deck, secure the spout with the provided mounting hardware, tightening it firmly but carefully to avoid overtightening.
4. Installer håndtagene: Place the handle escutcheons over the side holes. Connect the handle assemblies to the valve stems, ensuring the hot and cold handles are on the correct sides (typically hot on the left, cold on the right). Secure the handles with the provided screws or set screws, using the 5/32” hex wrench if applicable.
5. Test for lækager: Once all components are installed and secured, slowly turn on the main water supply. Check all connections for any signs of leaks. If leaks are detected, tighten the connections as necessary.
6. Bekræft drift: Operate both handles to ensure smooth water flow and proper temperature control.

6. Betjeningsvejledning

The Moen Genta LX tub faucet features two lever handles for precise control over water flow and temperature.

• Tænd/sluk: Løft håndtagene for at tænde for vandet. Tryk dem ned for at slukke for vandet.
• Justering af temperatur: Det venstre håndtag styrer varmt vand, og det højre håndtag styrer koldt vand. Juster begge håndtag samtidigt for at opnå den ønskede vandtemperatur.
• Justering af flow: The further you lift the handles, the greater the water flow.

7. Vedligeholdelse

Proper care and cleaning will help maintain the finish and performance of your Moen faucet.

• Rengøring af finishen: Rengør krombelægningen med en blød,amp cloth and mild soap. Rinse thoroughly with warm water and dry with a soft cloth to prevent water spots.
• Undgå skrappe rengøringsmidler: Do not use abrasive cleaners, harsh chemicals, ammonia-based cleaners, or polishing agents, as these can damage the finish.
• Vedligeholdelse af belufter: If water flow becomes restricted, the aerator may need cleaning. Unscrew the aerator from the spout, rinse out any debris, and reattach.

8. Fejlfinding

Hvis du oplever problemer med din vandhane, kan du se følgende almindelige problemer og løsninger:

9. Specifikationer

10. Garanti og support

Moen-produkter er fremstillet under de højeste standarder for kvalitet og håndværk. Denne Moen-vandhane er bakket op af en Begrænset livstidsgaranti mod lækager, dryp og finishfejl til den oprindelige køber.

For detailed warranty information, replacement parts, or technical assistance, please visit the official Moen webwebstedet eller kontakt Moens kundeservice direkte. Gem din købskvittering som købsbevis i tilfælde af garantikrav.

Note: The M-PACT common valve system allows you to update the faucet style in the future without replacing any plumbing.