KING KB ECO2S Garage Heater 15000W/240V Instruction Manual

1. Introduktion

The KING KB ECO2S Garage Heater is designed to provide efficient and controlled heating for garages and similar large spaces. This unit features an integrated ECO2S electronic thermostat with remote control, offering energy-efficient 2-stage heating and an Eco mode that automatically adjusts wattage. It also includes fan-only and timer modes, along with an auto-memory feature to retain settings after power interruptions. Constructed with spiral steel elements and a high CFM fan, it ensures even air distribution and prolonged heater life. A universal wall/ceiling bracket is included for flexible installation.

Billede: Forside view of the KING KB ECO2S Garage Heater, highlighting the control panel and heating elements.

2. Vigtige sikkerhedsoplysninger

WARNING: Read all instructions before installing or using this heater. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury.

• Afbryd altid strømmen før service eller rengøring af varmelegemet.
• Denne varmeovn er varm, når den er i brug. For at undgå forbrændinger, lad ikke bar hud berøre varme overflader.
• Hold brændbare materialer, såsom møbler, puder, sengetøj, papirer, tøj og gardiner mindst 3 m fra forsiden af ​​varmelegemet, og hold dem væk fra siderne og bagsiden.
• Må ikke bruges udendørs.
• Dette varmelegeme er ikke beregnet til brug i badeværelser, vaskerum og lignende indendørs steder.
• Før ikke ledningen under gulvtæpper. Dæk ikke ledningen med tæpper, løbere eller lignende belægninger. Anbring ledningen væk fra trafikområdet, og hvor den ikke vil blive snublet over.
• Sæt altid varmeapparater direkte i en stikkontakt/stikkontakt. Brug aldrig med en forlængerledning eller flytbar el-hane (stikkontakt/stikdåse).
• This heater is for 240V applications only. Ensure proper wiring and circuit breaker capacity.
• Installationen skal udføres af en kvalificeret elektriker i overensstemmelse med alle lokale og nationale el-forskrifter.

3. Pakkens indhold

The KING KB ECO2S Garage Heater package includes the following items:

• KING KB ECO2S Garagevarmer
• Universal væg-/loftmonteringsbeslag
• Håndholdt fjernbetjening
• Remote Control Wall Holder
• Installation Hardware (lag bolts, nuts, etc.)
• Heavy-duty pigtail (for electrical connection)

Image: KING KB ECO2S Garage Heater shown with its included mounting bracket and remote control.

4. Opsætning og installation

4.1 Montering af varmelegemet

The universal bracket allows for wall or ceiling mounting. Ensure the mounting surface can support the heater's weight (approximately 48 pounds) and is structurally sound. Use the provided lag bolts to secure the bracket to framing members.

• Attach the bracket to the heater using the large knobs on the sides.
• Adjust the heater's angle using the smaller knobs on the bracket. The heater can be tilted to four different positions to direct heat as needed.

Image: Diagram illustrating recommended garage coverage based on heater wattage. The 15000W model heats up to 1,500 sq ft.

4.2 Elektrisk tilslutning

WARNING: Electrical installation must be performed by a licensed electrician in accordance with all local and national electrical codes.

• Ensure power is disconnected at the circuit breaker before beginning any wiring.
• Remove the access panel on the heater by loosening the Phillips screw.
• Remove the knockout on the side of the heater where the wiring will enter.
• Install the provided grommet with integral strain relief into the knockout hole.
• Connect the heavy-duty pigtail wires to the terminal block inside the heater:
  • Black wire to L1 lug.
  • Red wire to L2 lug.
  • Green wire to the grounding screw.
• Ensure all wires are securely tightened and that no insulation is under the terminals.
• Tighten the strain relief nut to secure the pigtail and prevent damage to the wiring.
• Close the access panel and secure it with the Phillips screw.
• This 15000W, 240V unit requires a minimum of 8 AWG copper wire and a 40 Amp afbryder.

Billede: Bagside view of the heater with the wiring access panel open, showing the terminal block for electrical connections.

4.3 Termostatindstilling

On the back of the heater, there is a toggle switch to select between the built-in thermostat and an external thermostat.

• Set the switch to "I" for the built-in thermostat (recommended for most users).
• Set the switch to "II" if you are using an external thermostat wired by an electrician.
• Incorrect setting of this switch will prevent normal operation.

4.4 Installationsvideoreference

The following video demonstrates the wiring and mounting process for a similar garage heater. While the model shown is 6000W, the general installation principles apply to the KING KB ECO2S heater.

5. Betjeningsvejledning

The heater features an intuitive control panel and a remote control for convenient operation.

5.1 Kontrolpanel

Upon plugging in the unit, it will beep, indicating power and correct voltage. The control panel features a digital display and several buttons:

• Power knap: Tænder/slukker enheden.
• Mode knap: Cycles through different heating modes:
  • Lav: Operates at a lower wattage.
  • Øko-tilstand: Automatically uses the lowest wattage needed to heat the room, optimizing energy efficiency.
  • Kun fan: Cirkulerer luft uden opvarmning.
  • Høj: Operates at maximum wattage for rapid heating.
• Op/Ned knapper: Juster den ønskede temperaturindstilling.
• Timer knap: Sets a timer for the heater to run for a predetermined length of time, after which it will automatically shut off.

Billede: Forside view of the heater, showing the adjustable louvers for directing airflow.

5.2 Fjernbetjening

The compact remote control provides full functionality from a distance, allowing you to adjust settings without directly accessing the unit.

• Power knap: Tænder/slukker enheden.
• Mode knap: Cycles through heating modes (Low, Eco, Fan Only, High).
• Temperatur op/ned: Justerer den ønskede temperatur.
• Timer knap: Indstiller driftstimeren.

The remote control is a convenient feature, especially when the heater is mounted high or in a hard-to-reach location.

6. Vedligeholdelse

WARNING: Always disconnect power at the main service panel before attempting any maintenance or cleaning.

• Rensning: Rengør jævnligt varmelegemets yderside med en blød, tør klud.amp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Fjernelse af støv: Use a vacuum cleaner with a brush attachment to remove dust from the grilles and heating elements. Ensure the heater is completely cool before cleaning.
• Inspektion: Regularly inspect the power cord and plug for any signs of damage. If damaged, do not use the heater and contact a qualified electrician for repair.
• Smøring: The unit features a permanently lubricated motor and does not require additional lubrication.

7. Fejlfinding

8. Specifikationer

9. Garanti og support

For warranty information, please refer to the documentation included with your product or visit the official KING website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact KING customer service.

Kontaktoplysninger kan typisk findes på producentens webwebsted eller i produktemballagen.