HyperGear Wave bærbar trådløs Bluetooth-højttaler 14704 brugermanual

Indledning

The HyperGear Wave Portable Wireless Bluetooth Speaker (Model 14704) is designed to deliver high-definition stereo sound in various environments. Its IPX4 waterproof rating makes it suitable for use near water, while the built-in microphone allows for hands-free calls. This manual provides essential information for the proper setup, operation, and maintenance of your speaker.

Image: HyperGear Wave speaker, showcasing its waterproof design with water splashes.

Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• HyperGear Wave Speaker
• 3.5mm Stereo Auxiliary Cable
• Micro USB opladningskabel
• Brugervejledning (dette dokument)

Image: The HyperGear Wave speaker alongside its included 3.5mm auxiliary cable and Micro USB charging cable.

Opsætning

1. Opladning af højttaleren

Before initial use, fully charge the speaker. Connect the Micro USB Charging Cable to the speaker's charging port and the other end to a USB power source (e.g., wall adapter, computer USB port). The charging indicator light will illuminate during charging and turn off or change color when fully charged.

2. Tænd/sluk

Press and hold the Power button (usually marked with a power icon) for approximately 3 seconds to turn the speaker on or off. A sound prompt or LED indicator will confirm the status change.

Betjeningsvejledning

1. Bluetooth-parring

1. Ensure the speaker is powered on and within 33 feet (10 meters) of your Bluetooth-enabled device.
2. The speaker will automatically enter pairing mode, indicated by a flashing LED light (refer to your speaker's specific LED behavior).
3. On your device, navigate to the Bluetooth settings and search for available devices.
4. Select "HyperGear Wave" (or similar name) from the list.
5. Når højttaleren er parret, udsender den en bekræftelseslyd, og LED-lyset lyser konstant.

Højttaleren vil automatisk forsøge at genoprette forbindelsen til den sidst parrede enhed, når den tændes.

Image: The HyperGear Wave speaker positioned on sand, demonstrating its wireless capability for outdoor use.

2. Grundlæggende kontroller

• Afspil/pause: Tryk én gang på knappen Afspil/Pause.
• Lydstyrke op: Tryk på '+'-knappen.
• Skrue ned for lyden: Tryk på '-' knappen.
• Næste nummer: Tryk på '+'-knappen og hold den nede.
• Forrige nummer: Tryk på '-'-knappen og hold den nede.
• Besvar/afslut opkald: Tryk én gang på Afspil/Pause-knappen under et indgående opkald.
• Afvis opkald: Tryk på Afspil/Pause-knappen og hold den nede under et indgående opkald.

3. Audio Input Modes

The HyperGear Wave speaker supports multiple audio input options:

• Bluetooth-tilstand: Standard trådløs forbindelse.
• Auxiliary (AUX) Mode: Connect an audio device using the included 3.5mm Stereo Auxiliary Cable. The speaker will automatically switch to AUX mode when the cable is inserted.
• Micro SD-korttilstand: Insert a Micro SD card (not included) with audio files into the designated slot. The speaker will automatically detect and play music from the card.

Billede: Et nærbillede view of the speaker highlighting its compatibility with Bluetooth, Auxiliary input, and Micro SD cards.

Opretholdelse

• Rensning: Brug en blød, damp cloth to clean the speaker's exterior. Avoid harsh chemicals or abrasive cleaners.
• Vandeksponering: While IPX4 waterproof, avoid submerging the speaker. Ensure all port covers are securely closed before exposure to water.
• Opbevaring: Opbevar højttaleren et køligt, tørt sted væk fra ekstreme temperaturer og direkte sollys.
• Batteripleje: For at forlænge batteriets levetid bør du undgå at aflade højttaleren helt ofte. Oplad den regelmæssigt, selvom den ikke er i brug i længere perioder.

Image: The HyperGear Wave speaker attached to a kayak, illustrating its suitability for splash-prone environments.

Fejlfinding

• Speaker will not turn on: Sørg for, at batteriet er opladet. Tilslut opladningskablet, og prøv igen.
• Kan ikke parres med Bluetooth-enhed:
  • Sørg for, at højttaleren er i parringstilstand (blinkende LED).
  • Sørg for, at Bluetooth er aktiveret på din enhed.
  • Flyt højttaleren tættere på din enhed (inden for 33 meter).
  • Sluk og tænd både højttaleren og din enheds Bluetooth.
  • Glem højttaleren fra din enheds Bluetooth-liste, og forsøg at parre den igen.
• Ingen lyd eller lav lydstyrke:
  • Juster lydstyrken på både højttaleren og din tilsluttede enhed.
  • Ensure the speaker is properly paired or the AUX cable/Micro SD card is correctly inserted.
  • Kontroller, om lydkilden afspilles.
• Dårlig lydkvalitet:
  • Flyt højttaleren tættere på din Bluetooth-enhed for at undgå interferens.
  • Sørg for, at der ikke er nogen forhindringer mellem højttaleren og din enhed.
  • If using AUX, check the cable for damage and ensure it's fully inserted.

Specifikationer

Garanti og support

Garantioplysninger

This HyperGear product comes with a Limited Warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included in your product packaging or visit the official HyperGear webwebsted.

Kundesupport

If you encounter any issues or have questions not covered in this manual, please contact HyperGear customer support. Contact information can typically be found on the product packaging or the official HyperGear webwebsted: www.hypergear.com.