GOOLOO X7 4250A Jump Starter with Air Compressor Instruction Manual

1. Introduktion

Thank you for choosing the GOOLOO X7 4250A Jump Starter with Air Compressor. This versatile device is designed to provide reliable jump-starting power for vehicles, inflate tires, and serve as a portable power bank and LED flashlight. Please read this manual thoroughly before use to ensure safe and optimal operation.

2. Sikkerhedsoplysninger

Overhold altid følgende sikkerhedsforanstaltninger for at forhindre personskade eller beskadigelse af enheden og køretøjet:

• Enheden må ikke nedsænkes i vand, og den må ikke udsættes for regn.
• Do not operate the device if it is damaged or has been dropped.
• Opbevares utilgængeligt for børn.
• Sørg for tilstrækkelig ventilation under brug og opladning.
• Undgå kortslutning af jumpstarterens kobling.amps.
• The device features 10 built-in protection functions, including over-current, short-circuit, reverse polarity, low/high temperature, over-voltage, and over-charge protection. However, always follow instructions carefully.
• Forsøg ikke at starte et køretøj med et alvorligt beskadiget eller frossent batteri.
• Operate within the specified temperature range (-20°C to 60°C).

3. Pakkens indhold

Bekræft at alle varer er til stede i din pakke:

• 1 x GOOLOO X7 Jump Starter with Air Compressor
• 1 x Smart Jumper kabel
• 1 x USB-A til USB-C-kabel
• 1 x bæretaske
• 1 x luftslange
• 3 x luftdyser
• 1 x brugermanual

Image: GOOLOO X7 Jump Starter with all included accessories, including jumper cables, air hose, and various nozzles.

4. Produktet er slutview

Familiarize yourself with the main components of your GOOLOO X7 device:

1. Hovedenhed: Contains the battery, control panel, and ports.
2. Digital skærm: Shows battery level, tire pressure, and operating modes.
3. Starthjælpsport: Til tilslutning af de smarte jumperkabler.
4. Air Compressor Port: Til tilslutning af luftslangen.
5. USB-udgangsporte: Til opladning af eksterne enheder.
6. USB-C indgangsport: For charging the GOOLOO X7 itself.
7. LED lommelygte: Integreret lys med flere tilstande.

Image: Close-up of the GOOLOO X7's digital display, showing battery indicator and pressure units.

5. Opsætning

Before first use, ensure the GOOLOO X7 is fully charged.

1. Indledende opkrævning: Connect the provided USB-A to USB-C cable to the device's USB-C input port and a suitable USB wall adapter (not included). Charge until the battery indicator on the digital display shows full.
2. Tjek batteriniveau: Press the power button once to check the current battery level on the digital display. It is recommended to have at least 50% charge before jump-starting a vehicle.

Image: Close-up of the Type-C charging port on the GOOLOO X7 device.

6. Betjeningsvejledning

6.1. Start af et køretøj med startkabler

The X7 can jump start all 12V vehicles (up to 10L gasoline and 10L diesel engines) up to 70 times on a single charge.

1. Ensure the GOOLOO X7 has sufficient charge.
2. Connect the smart jumper cable to the jump start port on the X7.
3. Sæt den røde clamp (+) to the positive terminal of the vehicle battery.
4. Sæt den sorte clamp (-) to the negative terminal of the vehicle battery.
5. Once connected correctly, the smart cable indicator light will turn green. If it's red, check connections.
6. Start the vehicle. If it doesn't start immediately, wait 30 seconds and try again.
7. Når køretøjet starter, skal du afbryde koblingen.amps from the car battery first, then disconnect the smart cable from the X7.
8. For completely discharged batteries (below 2V), use the Boost function by pressing and holding the Boost button on the smart cable for 3 seconds until the indicator turns green.

Image: The GOOLOO X7 device with smart jumper cables attached, ready for use.

6.2. Brug af luftkompressoren

The X7 features a 160 PSI digital tire inflator, capable of inflating a typical car tire to 20 PSI in approximately 2 minutes.

1. Connect the air hose to the air compressor port on the X7.
2. Attach the other end of the air hose to the tire valve. Use appropriate nozzles for different inflatables (e.g., balls, bicycle tires).
3. Turn on the X7. The digital display will show the current tire pressure.
4. Use the '+' and '-' buttons to set the desired pressure. The device supports PSI, BAR, and KPA units.
5. Tryk på startknappen for at starte oppumpningen. Kompressoren stopper automatisk, når det forudindstillede tryk er nået.
6. Disconnect the air hose from the tire and the X7.

Image: The GOOLOO X7 device with the air hose and various inflation nozzles.

6.3. Brug som powerbank

The X7 can charge your electronic devices with its 18W fast charging capability.

1. Connect your device's charging cable to one of the USB output ports on the X7.
2. The X7 will automatically begin charging your device.

Image: The GOOLOO X7 device connected via USB to charge a mobile phone.

6.4. Brug af LED-lommelygten

The X7 includes a 400-lumen LED flashlight with four modes.

1. Press and hold the flashlight button to turn on the continuous white light.
2. Press the button again to cycle through modes: continuous red light, flashing light, SOS signal.
3. Press and hold the button again to turn off the flashlight.

Image: The GOOLOO X7 device with its integrated LED flashlight illuminated.

7. Charging the GOOLOO X7

To recharge your GOOLOO X7:

1. Connect the provided USB-A to USB-C cable to the X7's USB-C input port.
2. Connect the other end of the cable to a USB wall adapter (5V/3A recommended) or a car charger.
3. Det digitale display viser opladningsstatus. Oplad indtil batteriindikatoren er fuldt.

8. Vedligeholdelse

Proper maintenance ensures the longevity and performance of your GOOLOO X7.

• Rensning: Wipe the device with a dry, soft cloth. Do not use harsh chemicals or abrasives.
• Opbevaring: Opbevar enheden et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
• Opladning: Recharge the device every 3-6 months if not in regular use to maintain battery health.
• Varmeafledning: The unique honeycomb design aids in heat dissipation, preventing overheating during use and extending product lifespan. Ensure vents are not blocked.

9. Fejlfinding

If you encounter issues with your GOOLOO X7, refer to the following common problems and solutions:

• Enheden tænder ikke: Ensure the device is charged. If completely discharged, charge for at least 30 minutes before attempting to power on.
• Køretøjet starter ikke med startkabler:
  • Check that the smart jumper cable is securely connected to both the X7 and the vehicle battery terminals.
  • Ensure correct polarity (red to positive, black to negative).
  • If the vehicle battery is extremely low (below 2V), use the Boost function on the smart cable.
  • The vehicle's battery may be beyond jump-starting. Consult a mechanic.
• Luftkompressoren puster sig ikke op:
  • Ensure the air hose is securely connected to both the X7 and the tire valve.
  • Check that the desired pressure is set and the compressor is turned on.
  • Verify the X7 has sufficient battery charge.
• Eksterne enheder oplades ikke: Ensure the X7 has sufficient charge and the USB cable is properly connected.

If problems persist, please contact GOOLOO customer support.

10. Specifikationer

11. Garanti og support

GOOLOO is committed to providing high-quality products and excellent customer service.

• Garanti: The GOOLOO X7 comes with an 18-month warranty from the date of purchase.
• Returpolitik: Enjoy a 30-day unconditional return guarantee.
• Kundesupport: GOOLOO offers 24/7 customer support.
• Teknisk support: Lifetime customer and technical support are provided.

For any inquiries, technical assistance, or warranty claims, please contact GOOLOO customer service through the retailer's platform or the official GOOLOO webwebsted.

Image: A customer support representative wearing a headset, symbolizing GOOLOO's commitment to customer service.