1. Introduktion
The Steinel L 840 SC is an advanced LED outdoor wall light designed for modern exterior illumination. It features an integrated 160° high-frequency motion detector and smart control capabilities via the Steinel Connect app. This light provides warm white illumination and offers various customizable settings for enhanced security and convenience around your home, pathways, garden, and patio.
2. Sikkerhedsinstruktioner
- Elektrisk sikkerhed: Installationen skal udføres af en kvalificeret elektriker i overensstemmelse med nationale ledningsføringsforskrifter og lokale el-forskrifter.
- Strømafbrydelse: Always disconnect the power supply at the main circuit breaker before attempting any installation, maintenance, or repair work.
- Udendørs brug: This product is designed exclusively for outdoor use. Ensure proper sealing and weather protection during installation.
- Monteringsoverflade: Mount the light on a stable, flat surface that can support its weight.
- Operation Voltage: Sørg for, at strømforsyningen voltage matcher produktets angivne volumentage (220-240 V).
- Ikke-udskiftelig LED: The LED light source is integrated and cannot be replaced. Do not attempt to open the LED module.
3. Pakkens indhold
Kontroller venligst, at alle komponenter er til stede og ubeskadigede:
- Steinel L 840 SC LED udendørs væglampe
- Mounting material (3 screws, 3 wall plugs, 3 spacers)
- Brugermanual
4. Opsætning og installation
The Steinel L 840 SC is designed for wall mounting. Ensure the chosen location provides optimal coverage for the motion sensor and is within reach of the electrical supply.
4.1 Overvejelser vedrørende monteringssted
- Højde: For optimal motion detection, mount the light at a height of approximately 1.8 to 2.5 meters.
- Sensor rækkevidde: The 160° high-frequency sensor has a range of up to 5 meters. Consider the desired detection area when positioning.
- Forhindringer: Avoid mounting near large metal objects, dense foliage, or other sources of interference that might affect sensor performance.
4.2 Installationstrin
- Afbryd strømmen: Turn off the main power supply to the installation area at the circuit breaker. Verify that the power is off using a voltage tester.
- Forbered monteringsoverfladen: Mark the drilling points on the wall using the light fixture as a template. Drill holes and insert the provided wall plugs.
- Ledningsføring: Connect the electrical wires (Live, Neutral) from your household wiring to the corresponding terminals on the light fixture. Ensure secure connections.
- Monter armaturet: Secure the light fixture to the wall using the provided screws and spacers. Ensure it is firmly attached.
- Gendan strøm: Once installation is complete and all connections are secure, restore power at the circuit breaker. The light will perform an initial self-test.
Figure 1: Steinel L 840 SC LED Outdoor Wall Light. This image shows the anthracite-colored wall light, highlighting its compact and modern design.
Figure 2: The L 840 SC light installed on an exterior wall, providing illumination to a patio area at night. This demonstrates its aesthetic integration and functional lighting.
5. Betjeningsvejledning
The Steinel L 840 SC is primarily controlled and configured via the Steinel Connect app.
5.1 Steinel Connect App
The free Steinel Connect app allows you to customize various settings of your L 840 SC light.
- Download appen: Download the "Steinel Connect" app from the Google Play Store (for Android devices) or the Apple App Store (for iOS devices).
- Parring: Follow the in-app instructions to pair your L 840 SC light via Bluetooth. Ensure Bluetooth is enabled on your smartphone.
- Konfiguration: Once paired, you can access and adjust the following settings:
- Indstillinger for bevægelsessensor: Adjust the detection range (up to 5m) and sensitivity in 3 directions to fine-tune motion detection. The sensor is designed to ignore small animals and swaying branches.
- Lysets varighed: Set how long the main light stays on after motion is detected.
- Tusmørkeindstilling: Define the ambient light level at which the sensor becomes active.
- Night Light (Basic Light): Enable a continuous low-level illumination (10% to 50% brightness) during darkness for constant ambient lighting.
- Kontinuerligt lys: Activate a 4-hour continuous full brightness mode for extended illumination when needed.
- Dimmable Main Light: Adjust the brightness of the main light output from 50% to 100%.
- Light Groups (Bluetooth Mesh): Connect multiple Steinel Connect lights to create groups and control them simultaneously for synchronized lighting scenarios.
Figure 3: Screenshot of the Steinel Connect app interface, demonstrating the various settings available for controlling the light fixture.
Figure 4: Diagram illustrating how multiple Steinel Connect lights can form a Bluetooth Mesh network for synchronized control.
5.2 Betjening af bevægelsessensor
The L 840 SC features an invisible 160° high-frequency sensor that reliably detects human movement.
- Princip for detektion: The sensor emits high-frequency electromagnetic waves and detects changes in the echo caused by movement within its detection zone.
- Intelligent detektion: It is optimized to differentiate between human movement and smaller disturbances like pets or wind-blown foliage, reducing false triggers.
- Justerbar rækkevidde: The detection range can be precisely adjusted via the app to suit the specific requirements of your installation area.
Figure 5: Visual representation of the high-frequency sensor's detection pattern, showing how it emits waves to detect movement.
Figure 6: Diagram illustrating the typical motion detection range of the sensor in an outdoor environment, showing its coverage area.
6. Vedligeholdelse
The Steinel L 840 SC is designed for low maintenance. The integrated LED system has a long lifespan of approximately 50,000 hours, meaning bulb replacement is not required.
- Rensning: For at rengøre armaturet skal du tørre det af med en blød kludamp klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler, da disse kan beskadige overfladen.
- Inspektion: Kontrollér regelmæssigt armaturet for tegn på skader eller løse forbindelser. Hvis der findes problemer, skal strømmen afbrydes og en kvalificeret elektriker kontaktes.
7. Fejlfinding
Hvis du støder på problemer med din Steinel L 840 SC, skal du se følgende almindelige fejlfindingstrin:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | No power supply; incorrect wiring; twilight setting too high. | Check circuit breaker; verify wiring connections; adjust twilight setting in the app. |
| Lyset forbliver tændt konstant. | Continuous light mode activated; constant motion in detection area; faulty sensor. | Deactivate continuous light in the app; check for persistent movement; contact support if sensor is faulty. |
| Sensor does not detect motion. | Detection range too small; sensor obstructed; incorrect sensitivity setting. | Increase detection range in the app; clear obstructions; adjust sensor sensitivity. |
| Kan ikke oprette forbindelse til appen. | Bluetooth off; light not in pairing mode; app issues. | Ensure Bluetooth is on; restart the light; restart the app or reinstall it. |
8. Specifikationer
| Feature | Specifikation |
|---|---|
| Modelnummer | 055530 |
| Dimensioner (L x B x H) | 11 x 11 x 13.4 cm |
| Vægt | 0.504 kg |
| Strømforsyning | 220 – 240 V / 50 – 60 Hz |
| Wattage | 9.1 watt |
| Lysstrøm | 319 lm |
| Lys farve | Varm hvid (3000 K) |
| LED levetid | 50,000 timer |
| Bevægelsessensor | 160° High-Frequency (invisible) |
| Detektionsområde | Op til 5 meter |
| Forbindelse | Bluetooth |
| Kontrolmetode | Steinel Connect App (iOS/Android) |
| Materiale | UV-resistant Plastic |
| Farve | Antracit |
| Beskyttelsesklasse | Waterproof (specific IP rating not provided, but implied by 'waterproof') |
| Installationstype | Vægmontering |
| Genstands form | Rektangulær |
9. Garanti og support
Steinel products are manufactured to high-quality standards and undergo rigorous testing. For specific warranty information, please refer to the warranty card included with your product or visit the official Steinel webwebsted.
If you require technical assistance, have questions about installation, or need to report a defect, please contact Steinel customer support through their official webwebstedet eller kontaktoplysningerne på din produktemballage.
Figure 7: The Steinel Tap Duo C wireless switch, an optional accessory that can be used to control Steinel Connect lights.