ELKRON IR15 Passive Infrared Detector (Model 80IR3D00113) Instruction Manual

1. Introduktion

1.1 Produkt overview

The ELKRON IR15 is a digital passive infrared (PIR) volumetric detector designed for indoor security applications. It detects motion by sensing changes in infrared radiation within its detection zone. This device features two selectable sensitivity levels, a maximum detection range of 15 meters, and a 90° opening angle. Its Fresnel lens is configured with 18 beams across 4 planes, including a look-down zone for enhanced coverage.

1.2 Sikkerhedsoplysninger

• Læs alle instruktioner omhyggeligt før installation og drift.
• Installationen skal udføres af kvalificeret personale i overensstemmelse med lokale el-forskrifter.
• Afbryd strømmen, før du udfører nogen form for ledningsføring eller vedligeholdelse.
• Do not expose the detector to direct sunlight, extreme temperatures, or high humidity.
• Avoid mounting near heat sources, air conditioning vents, or objects that may cause rapid temperature changes.

2. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• ELKRON IR15 Passive Infrared Detector unit
• Monteringsskruer og vægpropper
• Instruktionsmanual (dette dokument)

3. Installation

3.1 Monteringssted

Choose a mounting location that provides optimal coverage of the area to be protected. The detector can be mounted on a wall or in a corner. Ensure the detector is positioned to avoid direct line of sight to windows, heat sources, or moving objects that are not intended to trigger the alarm.

Recommended mounting height: 2.1 to 2.4 meters (7 to 8 feet) from the floor.

3.2 Montering af detektoren

1. Carefully open the detector casing.
2. Mark the drilling points on the wall or corner using the detector's base as a template.
3. Bor huller og isæt vægdyvler om nødvendigt.
4. Secure the detector base to the wall or corner using the provided screws.
5. Route the wiring through the designated opening in the base.

Figure 1: ELKRON IR15 Passive Infrared Detector. This image shows the compact design of the detector, suitable for discreet wall or corner mounting.

3.3 Ledningsforbindelser

The ELKRON IR15 requires a 12V DC power supply. Connect the power and alarm output wires to your security system control panel as follows:

• Strømindgang: Connect 12V DC to the designated terminals (typically + and -).
• Alarmoutput: Connect the opto-relay output (NO/NC) to the alarm zone input of your control panel.
• Tampeh Switch: Tilslut tamper output to a 24-hour tamper zone on your control panel. This switch activates if the detector casing er åbnet.

Ensure all connections are secure and correctly polarized. Refer to your security system's manual for specific wiring diagrams.

4. Opsætning

4.1 Følsomhedsjustering

The ELKRON IR15 offers two selectable sensitivity levels to adapt to different environments and reduce false alarms. A jumper or switch inside the detector typically controls this setting.

• Høj følsomhed: Recommended for environments with minimal environmental disturbances.
• Lav følsomhed: Recommended for environments prone to minor disturbances (e.g., small pets, air currents) to prevent false alarms.

After adjusting the sensitivity, perform a walk test to ensure proper detection coverage and to verify that the chosen sensitivity level is appropriate for the protected area.

5. Driftsprincipper

The ELKRON IR15 is a passive infrared detector, meaning it does not emit any energy. Instead, it detects changes in infrared energy (heat) within its field of view. When a person or object with a different temperature than the ambient environment moves into the detection zone, the detector's Fresnel lens focuses this change onto its pyroelectric sensor. If the change in infrared energy meets the detector's criteria (based on sensitivity settings), it triggers an alarm signal to the connected security control panel.

The 90° detection angle and 15-meter range ensure comprehensive coverage for typical indoor spaces. The "look down zone" feature helps detect intruders moving directly below the detector.

6. Vedligeholdelse

To ensure optimal performance and longevity of your ELKRON IR15 detector, follow these maintenance guidelines:

• Regelmæssig rengøring: Periodically clean the detector's lens and casinFjern støv og snavs med en blød, tør klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Gåtest: Perform a walk test at least once a year, or after any significant changes to the protected area, to confirm proper operation and detection coverage.
• Kontrol af strømforsyning: Ensure the 12V DC power supply is stable and within the specified voltage rækkevidde.
• Miljøtjek: Verify that no new obstructions or heat sources have been introduced into the detection zone that could interfere with operation.

7. Fejlfinding

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact ELKRON technical support.

8. Specifikationer

9. Garanti og support

ELKRON products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official ELKRON webwebsted. Gem din købsbevis til garantikrav.

For technical assistance, troubleshooting, or service, please contact your authorized ELKRON dealer or ELKRON customer support. Contact information can typically be found on the ELKRON webwebsted eller produktemballage.

Webwebsted: www.elkron.it (Eksamplinket, det faktiske link kan variere)