Legrand 773611

Legrand Cariva Model 773611 White Double Pole Light Switch Instruction Manual

Model: 773611 | Mærke: Legrand

1.Overview

This manual provides essential information for the safe installation, operation, and maintenance of your Legrand Cariva Model 773611 White Double Pole Light Switch. This switch is designed for ON-OFF control of electrical circuits, featuring a double pole configuration and screw terminals for secure wiring. It is constructed from durable plastic and is suitable for various indoor electrical applications.

Legrand Cariva White Light Switch

Dette billede viser forsiden view of the Legrand Cariva White Light Switch, highlighting its white plastic finish and button design.

2. Sikkerhedsoplysninger

  • Elektrisk fare: Installationen skal udføres af en kvalificeret elektriker eller en kompetent person i overensstemmelse med alle lokale og nationale el-forskrifter.
  • Afbryd strømmen: Always turn off power at the circuit breaker or fuse box before installing, servicing, or removing the switch. Verify power is off using a voltage tester.
  • Voltage Bedømmelse: Overskrid ikke den angivne voltage-klassificering på 250V.
  • Kun indendørs brug: This switch is intended for indoor use in dry locations. Do not expose to moisture or extreme temperatures.
  • Korrekt ledningsføring: Ensure all wire connections are secure and correctly terminated to prevent electrical shorts or hazards.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

  • 1 x Legrand Cariva Model 773611 White Double Pole Light Switch

4. Opsætning (Installation)

  1. Sluk for strømmen: Locate the circuit breaker or fuse that controls the power to the switch location. Turn it OFF. Confirm power is off with a voltage tester.
  2. Fjern den gamle kontakt (hvis relevant): Carefully remove the wall plate and unscrew the old switch from the electrical box. Disconnect the wires, noting their connections.
  3. Forbered ledninger: Strip approximately 1/2 inch (12-15mm) of insulation from the ends of the electrical wires if necessary.
  4. Tilslut ledninger: The Legrand Cariva 773611 is a double pole switch. Connect the incoming live (hot) wires to the designated input terminals and the outgoing load wires to the designated output terminals. Ensure all screw terminals are tightened securely to prevent loose connections. A double pole switch typically controls two separate circuits or provides a full disconnection of both live and neutral for a single circuit (though this model specifies 'Normally Open' connection type, which implies it's a simple ON-OFF for a circuit). Consult a qualified electrician if unsure about wiring configurations.
  5. Monter kontakten: Gently fold the wires into the electrical box. Secure the new switch to the electrical box using the provided screws.
  6. Installer vægplade: Attach the decorative wall plate over the switch.
  7. Gendan strøm: Tænd for strømmen igen ved afbryderen eller sikringsboksen.
  8. Test drift: Test kontakten for at sikre, at den fungerer korrekt.

5. Betjeningsvejledning

The Legrand Cariva Model 773611 switch operates with a simple ON-OFF mechanism.

  • At tænde: Press the switch button to the 'ON' position.
  • At slukke: Press the switch button to the 'OFF' position.

6. Vedligeholdelse

  • Rensning: To clean the switch, ensure power is OFF at the circuit breaker. Wipe the surface with a soft, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
  • Inspektion: Periodically inspect the switch for any signs of damage, loose connections, or discoloration. If any issues are observed, turn off power and consult a qualified electrician.

7. Fejlfinding

ProblemMulig årsagLøsning
Light/Appliance does not turn ONIngen strøm til kredsløbet
Løs ledningsforbindelse
Faulty bulb/appliance
Kontroller afbryder/sikring
Turn off power and check wire terminals
Test bulb/appliance with another power source
Switch føles løsMounting screws are looseTurn off power and tighten mounting screws

Hvis fejlfindingstrinene ikke løser problemet, skal du kontakte en kvalificeret elektriker.

8. Specifikationer

FeatureDetalje
MærkeLegrand
Modelnummer773611
DriftstilstandTÆND SLUK
TilslutningstypeNormalt åben
Switch TypeDobbeltpolet afbryder
TerminaltypeSkrue
MaterialePlast
FarveHvid
Emnedimensioner (LxBxH)7 x 3.5 x 2 cm

9. Garanti og support

Legrand products are manufactured to high standards and are backed by a manufacturer's warranty. For specific warranty details, please refer to the documentation provided with your purchase or visit the official Legrand website. For technical support or assistance, please contact Legrand customer service through their official channels.

Webwebsted: www.legrand.com

Relaterede dokumenter - 773611

Preview Legrand LE15130AA Rullejalousi- og persienneafbryder - Tekniske specifikationer
Omfattende tekniske specifikationer for Legrand LE15130AA rullejalousi- og persienneafbryderen. Detaljerne omfatter elektriske mærkninger (250V~ 6AX), drifts- og opbevaringstemperaturer, ledningskrav (2 x 1.5 mm²) og mekaniske funktioner som låse- og tændingstid.
Preview Legrand 4 120 40/4 120 41 EMDX³ Energimåler Tekniske specifikationer og ledningsføringsvejledning
Detaljerede tekniske specifikationer, installationsvejledninger og ledningsdiagrammer for Legrand 4 120 40 og 4 120 41 EMDX³ trefasede energimålere. Inkluderer RS485 Modbus-tilslutning og sikkerhedsretningslinjer.
Preview Legrand Modulære Enheder og Fordelingstavler 2025 Katalog
Omfattende katalog over Legrand modulære enheder og fordelingstavler til elektriske installationer og datadistribution, inklusive afbrydere, fejlstrømsafbrydere, overspændingsafbrydere, afbrydere og fordelingstavler. Indeholder produktspecifikationer, tekniske detaljer og bestillingsinformation.
Preview Legrand Pass & Seymour NTL873W Enpolet/3-vejs afbryder med LED-natlys Installationsvejledning
Installationsvejledning til Legrand Pass & Seymour NTL873W, en enkeltpolet/3-vejs afbryder med integreret LED-natlys. Har omgivende lyssensor og justerbar lysstyrke. Indeholder ledningsdiagrammer og sikkerhedsforanstaltninger.
Preview Installing and Testing a GFCI Receptacle - Legrand Pass & Seymour Installation Guide
Detailed instructions for installing and testing a Legrand Pass & Seymour GFCI receptacle, covering wiring, features, safety precautions, and troubleshooting. Learn how to ensure proper GFCI protection in your electrical system.
Preview Legrand Keva Kanal- og Afslutningstilbehør - Tekniske Specifikationer
Omfattende teknisk katalog med detaljerede oplysninger om Legrands Keva-kanalsystemer og tilbehør til efterbehandling. Indeholder produktsortiment, dimensioner, tekniske specifikationer, installationsvejledning og tabeller over ledningskapacitet til elektriske installationer.