GREE XK-60

Gree XK-60 Wired Programmable Controller User Manual

For U-Match Systems

Indledning

This manual provides detailed instructions for the installation, operation, and maintenance of the Gree XK-60 Wired Programmable Controller. This controller is designed to interface with Gree U-Match air conditioning systems, offering precise control over your indoor climate. Please read this manual thoroughly before installation and operation to ensure proper use and optimal performance.

Produkt overview

The Gree XK-60 is a wired, programmable controller featuring a backlit LCD display and intuitive button controls. It allows users to manage various functions of their U-Match system, including operating modes, temperature settings, fan speeds, and programmable timers.

Gree XK-60 Wired Programmable Controller

Billedbeskrivelse: En front view of the Gree XK-60 wired programmable controller. The controller is white with a blue backlit LCD screen at the top. Below the screen are eight circular white buttons arranged in two rows of four. Text labels are printed below each button or pair of buttons. The GREE logo is centered between the screen and the buttons. The screen displays various icons for operating modes, fan speed, temperature, and timer settings.

Sikkerhedsoplysninger

  • Installation must be performed by a qualified and licensed HVAC technician.
  • Disconnect all power to the indoor and outdoor units before performing any wiring or maintenance.
  • Sørg for, at alle ledningsforbindelser overholder lokale og nationale elektriske forskrifter.
  • Forsøg ikke selv at reparere eller modificere controlleren. Kontakt kvalificeret servicepersonale.
  • Keep the controller away from water and excessive humidity.

Installation og opsætning

Montering af controlleren

The XK-60 controller is designed for wall mounting. Choose a location that is easily accessible, away from direct sunlight, heat sources, and drafts, which could affect temperature readings.

Ledningsinstruktioner

The controller connects to the indoor unit via a wired connection.

  1. Turn off the main power supply to the U-Match system.
  2. Open the wiring cover on the indoor unit and locate the control terminal block.
  3. Connect the communication wires from the XK-60 controller to the designated terminals on the indoor unit's control board. Refer to the U-Match system's indoor unit installation manual for specific wiring diagrams.
  4. Sørg for, at alle forbindelser er sikre og korrekt polariserede.
  5. Close the wiring cover and restore power to the system.

Note: Incorrect wiring can damage the controller or the U-Match system. If you are unsure, consult a professional technician.

Betjeningsvejledning

The Gree XK-60 controller features an LCD display and eight control buttons.

Knap funktioner

  • Indtast/Annuller: Bekræfter valg eller annullerer igangværende handlinger.
  • Pil op (▲): Increases temperature, fan speed, or navigates menu options upwards.
  • Pil ned (▼): Decreases temperature, fan speed, or navigates menu options downwards.
  • Fungere: Accesses advanced settings or special functions.
  • Ventilator: Justerer ventilatorhastigheden (Auto, Lav, Mellem, Høj).
  • Timer: Sets the On/Off timer.
  • Mode: Skifter mellem driftstilstande (Auto, Køling, Tørring, Varme, Ventilator).
  • Til/fra: Tænder eller slukker for enheden.

LCD display indikatorer

  • Temperaturvisning: Shows the current room temperature or set temperature in °F or °C.
  • Ikoner for driftstilstand:
    • Sun (Heat)
    • Snowflake (Cool)
    • Water Drop (Dry)
    • Fan Blade (Fan Only)
    • Auto (Automatic mode)
  • Indikator for blæserhastighed: Bar graph or specific icon showing current fan speed.
  • Timerindikator: "HOUR ON OFF" with numerical display for programmed times.
  • Special Function Indicators: "SHIELD", "MEMORY", "MASTER", "SAVE", "E-HEATER", "BLOW", "CO2", "QUIET" indicate active special features.

Grundlæggende betjening

  1. Tænd/sluk: Tryk på Til/Fra knappen for at tænde eller slukke for systemet.
  2. Vælg tilstand: Tryk på Mode button repeatedly to cycle through available operating modes (Auto, Cool, Dry, Heat, Fan).
  3. Indstil temperatur: In Cool or Heat mode, use the Pil op (▲) or Pil ned (▼) knapper for at justere den ønskede temperatur.
  4. Juster blæserhastighed: Tryk på Ventilator button repeatedly to select the desired fan speed (Auto, Low, Medium, High).
  5. Indstil timer: Tryk på Timer button to enter timer setting mode. Use the Pil op (▲) or Pil ned (▼) buttons to set the desired ON or OFF time, then press Indtast/annuller for at bekræfte.

Avancerede funktioner

To access advanced functions like "SHIELD" or "QUIET" mode, press the Fungere button. Use the arrow buttons to navigate through options and Indtast/annuller to select or confirm. Refer to the U-Match system's specific feature documentation for detailed explanations of each advanced function.

Opretholdelse

Rengøring af controlleren

  • Tør overfladen af ​​controlleren af ​​med en blød, tør klud.
  • Brug ikke slibende rengøringsmidler, opløsningsmidler eller kemiske spraymidler, da disse kan beskadige plastik- og elektroniske komponenter.
  • Ensure no liquid enters the controller casing.

System Filter Maintenance

While the controller itself does not require filter maintenance, regular cleaning or replacement of the U-Match indoor unit's air filters is crucial for optimal system performance and air quality. Refer to your U-Match indoor unit manual for filter maintenance instructions.

Fejlfinding

If you encounter issues with your Gree XK-60 controller, refer to the following common problems and solutions.

ProblemMulig årsagLøsning
Controllerens display er tomt.No power to the unit or controller.Check the main power supply to the U-Match system. Ensure wiring connections are secure.
Controller not responding to button presses.Temporary software glitch or communication error.Turn off power to the system for a few minutes, then restore power. If the issue persists, check wiring.
Forkert temperaturaflæsning.Controller located near a heat source or draft.Relocate the controller if possible, or ensure no external factors are influencing the sensor.
System not operating in selected mode.Communication error with indoor unit or system fault.Check for error codes on the indoor unit. Consult a qualified technician if the problem persists.

For complex issues or error codes not listed, contact a qualified HVAC technician or Gree customer support.

Specifikationer

  • Model: Gree XK-60
  • Kontroltype: Kablet programmerbar controller
  • Kompatibilitet: Gree U-Match Systems
  • Voltage: 230 volt
  • Speciel funktion: Programmable, Backlight
  • Kontrolmetode: Knap kontrol
  • Pakkedimensioner: Cirka 13.62 x 1.54 x 0.98 tommer
  • Varens vægt: Cirka 6.7 ounce

Garanti og support

For warranty information and technical support, please refer to the documentation provided with your Gree U-Match system or contact Gree customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

Gree Customer Support: Visit the official Gree webwebstedet eller kontakt din lokale distributør for support.