YAESU SBH-28 Desktop Rapid Charger Instruction Manual

1. Introduktion

The YAESU SBH-28 is a desktop rapid charger designed for use with the YAESU FT-70DR handheld transceiver and its compatible battery packs. This charger provides a convenient and efficient method for recharging your radio's battery, ensuring your device is always ready for operation. It requires an external AC adapter (such as SAD-18B, SAD-24B, or SAD-25B, typically supplied with the radio) or a 12V DC adapter (SDD-13) for power.

2. Sikkerhedsoplysninger

• Use only the specified YAESU AC adapters (SAD-18B, SAD-24B, SAD-25B) or the SDD-13 12V DC adapter. Using an incorrect power adapter may damage the charger or the radio and could pose a fire hazard.
• Udsæt ikke opladeren for vand eller fugt.
• Forsøg ikke at skille opladeren ad eller ændre den. Overlad al service til kvalificeret personale.
• Ensure the charger is placed on a stable, flat surface away from direct sunlight and heat sources.
• Opbevares utilgængeligt for børn.

3. Pakkens indhold

Bekræft, at din pakke indeholder følgende vare:

• YAESU SBH-28 Desktop Rapid Charger Unit

Note: The necessary AC power adapter (e.g., SAD-18B, SAD-24B, SAD-25B) or DC adapter (SDD-13) is ikke inkluderet with the SBH-28 charger and must be acquired separately or used from your FT-70DR radio's original accessories.

4. Opsætning

1. Tilslut strømadapteren: Insert the barrel connector of your compatible AC or DC power adapter into the DC IN jack located on the rear of the SBH-28 charger.
2. Tilslut til strømkilde: Plug the AC adapter into a standard wall outlet, or the DC adapter into a compatible 12V DC power source.

This image displays the Yaesu SBH-28 Desktop Rapid Charger. It is a compact, black plastic unit with a recessed area shaped to securely hold a Yaesu FT-70DR radio or its battery pack for charging. The charger features a power input port on the rear for connection to an external AC or DC adapter.

5. Betjeningsvejledning

To charge your FT-70DR radio or its battery pack:

1. Ensure the SBH-28 charger is properly connected to a power source as described in the Setup section.
2. Carefully place the FT-70DR radio (with its battery attached) or a standalone battery pack into the charging cradle. Ensure the contacts on the battery/radio align with the charging terminals in the SBH-28. The radio or battery should sit securely in the cradle.
3. Refer to your FT-70DR radio's instruction manual for details on the charging indicator light behavior (e.g., color changes, blinking patterns) to confirm charging status. The SBH-28 facilitates rapid charging.
4. Once the battery is fully charged, remove the radio or battery pack from the cradle.

6. Vedligeholdelse

• Keep the charging contacts clean and free of dust or debris. Use a dry, soft cloth to wipe them if necessary.
• Do not use harsh chemicals or abrasive cleaners on the charger.
• Opbevar opladeren et tørt sted, når den ikke er i brug.

7. Fejlfinding

• Charger not powering on or radio not charging:
  • Verify that the power adapter is securely connected to both the SBH-28 and the wall outlet/DC source.
  • Ensure you are using a compatible YAESU power adapter (SAD-18B, SAD-24B, SAD-25B, or SDD-13). Incorrect adapters may not provide sufficient power or may have incorrect voltage/polaritet.
  • Check the power outlet or DC source for functionality.
  • Ensure the radio or battery pack is correctly seated in the cradle, making proper contact with the charging terminals.
• Charging indicator light flickers or shows inconsistent status:
  • This can sometimes occur if the radio or battery is not perfectly seated. Try re-seating the radio/battery in the cradle.
  • Ensure the power adapter connection is firm.
  • Consult your FT-70DR radio's manual for specific interpretations of indicator light behavior.

8. Specifikationer

9. Garanti og support

For warranty information and technical support, please refer to the documentation provided with your original YAESU FT-70DR radio or visit the official YAESU webwebsted. Behold din købskvittering som købsbevis i tilfælde af garantikrav.