BTMETER BT-100 Digital Handheld Anemometer User Manual

1. Introduktion

Thank you for choosing the BTMETER BT-100 Digital Handheld Anemometer. This device is designed for accurate measurement of wind speed, wind temperature, and wind chill. Its portable, lightweight design makes it suitable for various applications, from HVAC system diagnostics to outdoor activities.

The BT-100 features a bright backlit LCD screen, low battery indicator, and multiple measurement units for convenience. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance.

Hvad er inkluderet:

• BTMETER BT-100 Digital Anemometer
• Halsrem
• 2 x 1.5V AAA batterier
• Convenient carry bag
• Brugsanvisning

Figure 1: Package Contents of the BTMETER BT-100 Anemometer

2. Sikkerhedsoplysninger

• Forsøg ikke at adskille eller modificere enheden.
• Hold enheden væk fra vand og miljøer med høj luftfugtighed.
• Undgå at udsætte enheden for ekstreme temperaturer eller direkte sollys i længere perioder.
• Sørg for, at batterierne vender korrekt. Fjern batterierne, hvis enheden ikke skal bruges i længere tid.
• Opbevares utilgængeligt for børn.

3. Produktet er slutview

Figure 2: BTMETER BT-100 Anemometer Labeled Parts

1. Ventilatorblade: Measures wind speed. Features 8 sensitive blades for accurate readings.
2. LCD skærm: Digital display for readings, units, and indicators.
3. Tænd / sluk-knap: Tænder og slukker for enheden.
4. UNIT knap: Cycles through wind speed units (m/s, km/h, ft/min, knots, mph).
5. MAX/MIN knap: Displays maximum or minimum recorded wind speed.
6. ° F/° C knap: Switches between Fahrenheit and Celsius temperature units.
7. AVG Button: Displays average wind speed.
8. Baggrundslys knap: Activates/deactivates the LCD backlight.
9. Stativ hul: 1/4-inch metal screw hole for mounting on a tripod.

4. Opsætning

4.1 Batteriinstallation

1. Find batterirummet på bagsiden af ​​enheden.
2. Use a small Phillips head screwdriver (not included, but often provided with similar devices) to unscrew the battery cover.
3. Isæt to 1.5V AAA-batterier, og sørg for at polerne vender korrekt (+/-).
4. Sæt batteridækslet på igen og fastgør det med skruen.

4.2 Fastgørelse af halsremmen

1. Locate the small loop hole at the bottom of the device.
2. Thread the thin end of the neck strap through the loop.
3. Pass the thicker part of the strap through the threaded loop to secure it.

4.3 Montering af stativ (valgfrit)

The BTMETER BT-100 features a 1/4-inch metal screw hole at the bottom, allowing it to be mounted on a standard tripod for continuous, hands-free measurements.

Figure 3: Tripod Mounting Option

5. Betjeningsvejledning

5.1 Tænd/sluk

• For at tænde: Tryk på Tænd/sluk button once. The LCD screen will activate.
• For at slukke: Tryk og hold nede Tænd/sluk knappen i 2 sekunder.
• The device also features an automatic power-off function after 14 minutes of inactivity to conserve battery life.

5.2 Wind Speed Measurement

Hold the device so that the wind flows directly through the fan blades. The wind speed will be displayed on the LCD screen.

5.3 Valg af enhed

Tryk på ENHED knap til at gennemgå de tilgængelige vindhastighedsenheder:

• m/s (meter pr. sekund)
• km/t (kilometer i timen)
• ft/min (fod pr. minut)
• knob
• mph (mile i timen)

5.4 Temperaturmåling

The device displays ambient temperature. To switch between Fahrenheit and Celsius:

• Tryk på °F/°C knap.

5.5 Baggrundsbelysningsfunktion

To activate or deactivate the LCD backlight:

• Tryk på Baggrundsbelysning button. The backlight will automatically turn off after 12 seconds if no other button is pressed.

Figure 4: HD Backlit Screen for Clear Readability

5.6 MAX/MIN/AVG-tilstande

The device can display maximum, minimum, and average wind speeds:

• Trykke MAX/MIN to toggle between maximum and minimum wind speed readings.
• Trykke AVG to display the average wind speed.

6. Ansøgninger

The BTMETER BT-100 is a versatile tool suitable for a wide range of applications:

• VVS-systemer: Measure air flow velocity in ducts and vents for installation and diagnostics.
• Dronedrift: Monitor wind conditions for safe drone flying, RC planes, wings, helicopters, and quads.
• Udendørs aktiviteter: Ideal for shooting, boat sailing, kite flying, climbing, and other activities where wind speed is a critical factor.
• Wind Chill Monitoring: Provides wind chill indication when temperatures are below 0°C (32°F).

Figure 5: Diverse Applications of the BT-100 Anemometer

7. Vedligeholdelse

7.1 Rengøring

Tør enheden af ​​med en blød, tør klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.

7.2 Opbevaring

Store the device in its provided carry bag in a cool, dry place when not in use. Remove batteries if storing for extended periods.

7.3 Udskiftning af batteri

When the low battery indicator appears on the LCD, replace the AAA batteries as described in Section 4.1.

8. Fejlfinding

8.1 No Display / Device Not Turning On

• Kontroller, om batterierne er korrekt installeret med den rigtige polaritet.
• Udskift med friske AAA-batterier.

8.2 Unøjagtige aflæsninger

• Ensure the fan blades are unobstructed and clean.
• Verify the correct measurement unit is selected.
• Ensure the device is held directly into the airflow for accurate wind speed readings.

8.3 "Er2" Error Message

• This indicates a low battery level. Replace the AAA batteries.

9. Specifikationer

10. Garanti og support

BTMETER is committed to providing high-quality instruments. While specific warranty details are not provided in the product information, the manufacturer states that for any quality problems, they will replace the unit. For further support or inquiries, please refer to the contact information provided with your product packaging or visit the official BTMETER webwebsted.