Indledning
Tak for købetasing the Audiolab 6000A Stereo Integrated Amplifier. This manual provides essential information for setting up, operating, and maintaining your amplifier to ensure optimal performance and longevity. The Audiolab 6000A is a versatile 100-watt integrated amplifier with built-in Bluetooth connectivity and an ESS 9018K2M DAC, offering a high-quality audio experience.
Sikkerhedsoplysninger
- Strømforsyning: Sørg for ampapparatet er tilsluttet en strømforsyning, der matcher lydstyrkentage angivet på enheden.
- Ventilation: Bloker ikke ventilationsåbningerne. Sørg for tilstrækkelig plads omkring enheden til korrekt luftgennemstrømning for at forhindre overophedning.
- Fugtighed: Keep the unit away from water, moisture, and high humidity.
- Rensning: Disconnect from power before cleaning. Use a soft, dry cloth. Do not use liquid or aerosol cleaners.
- Service: Overlad al service til kvalificeret servicepersonale. Forsøg ikke selv at åbne eller reparere enheden.
- Placering: Place the unit on a stable, level surface. Avoid placing it near heat sources or in direct sunlight.
Hvad er der i æsken
Ved udpakning skal du kontrollere, at alle nedenstående varer er til stede:
- Audiolab 6000A 100-watt Stereo Integrated Amp/Bluetooth DAC - Silver
- Strømkabel
- Brugervejledning (dette dokument)
Produkt overview
Frontpanel
Figur 1: Forside view of the Audiolab 6000A integrated amplifier, showing the display, control knobs for selection, mode, and volume, and power button.
- SEL (Selection) Knob: Used to navigate menus and select inputs.
- MODE knap: Used to switch between different operating modes.
- Skærm: Shows current input, volume level, and operational status.
- VOL (lydstyrke)-knap: Justerer udgangslydstyrken.
- Hovedtelefonudgang: 6.35 mm stik til tilslutning af hovedtelefoner.
- IR-modtager: Til fjernbetjeningssignaler.
- Power knap: Turns the unit on/off or puts it into standby.
Bagpanel
Figur 2: Bagside view of the Audiolab 6000A integrated amplifier, showing various input and output terminals, power inlet, and antenna.
- Power Inlet & Fuse: Connects to AC power. Includes a fuse holder.
- Afbryderen: Hovedstrømknap.
- Højttalerudgange: Binding posts for connecting left and right speakers.
- Digitale indgange (optisk/koaksial): Til tilslutning af digitale lydkilder.
- USB-indgang: For firmware updates (not for audio playback).
- Bluetooth-antenne: Til trådløs Bluetooth-forbindelse.
- Analoge indgange (AUX1, AUX2, AUX3): RCA inputs for analog audio sources.
- Phono input: Dedicated RCA input for turntables (MM).
- Pre-Out: RCA outputs for connecting to an external power amplivligere.
Opsætning
1. Placering
Place the Audiolab 6000A on a flat, stable surface, ensuring adequate ventilation around the unit. Avoid direct sunlight, heat sources, and areas with high humidity.
2. Tilslutning af højttalere
Connect your passive speakers to the speaker output terminals on the rear panel. Ensure correct polarity (+ to + and - to -) for both left and right channels. Use high-quality speaker cables for optimal sound.
3. Tilslutning af lydkilder
- Analog Sources: Connect CD players, tuners, or other analog devices to the AUX1, AUX2, or AUX3 RCA inputs.
- Pladespiller: Connect a turntable with a Moving Magnet (MM) cartridge to the PHONO input.
- Digital Sources: Connect digital audio sources like TVs, game consoles, or media streamers to the OPT1, OPT2 (Optical) or COAX1, COAX2 (Coaxial) inputs.
4. Strømtilslutning
Once all audio connections are made, connect the supplied power cable to the AC inlet on the rear panel and then to a suitable wall outlet. Ensure the main power switch on the rear panel is in the OFF position before connecting.
Drift
1. Tænd/sluk
First, ensure the main power switch on the rear panel is in the ON position. Then, press the front panel Power button to turn the unit on or put it into standby mode.
2. Valg af input
Drej på SEL knob on the front panel to cycle through available input sources (e.g., AUX1, OPT1, Bluetooth, Phono). The selected input will be displayed on the screen.
3. Lydstyrkekontrol
Drej på BIND knob clockwise to increase volume and counter-clockwise to decrease volume. The current volume level will be shown on the display.
4. Driftstilstande
The Audiolab 6000A features three distinct operating modes, selectable via the MODE knop:
- Integreret tilstand: Standard amplifier operation, where the pre-amplifier og kraft amplifier sections work together.
- Forstrømstilstand: Pre-amplifier section is bypassed, allowing the 6000A to function purely as a power amplifier. Useful when connecting an external pre-amplivligere.
- før-AmpLifier Mode: Magten amplifier section is bypassed, allowing the 6000A to function purely as a pre-amplifier. Useful when connecting an external power amplifier via the Pre-Out terminals.
5. Bluetooth-parring
Sådan parrer du en Bluetooth-enhed:
- Select the Bluetooth input using the SEL knop.
- The display will show "PAIRING" or similar, indicating it's ready to connect.
- On your mobile device, enable Bluetooth and search for "Audiolab 6000A".
- Vælg amplifier from the list to complete pairing. Once connected, the display will confirm.
6. DAC Functionality
The Audiolab 6000A incorporates an ESS 9018K2M DAC, allowing for high-resolution digital audio playback. Connect your digital sources (e.g., CD transport, network streamer) to the optical or coaxial digital inputs to utilize the internal DAC.
Opretholdelse
- Rensning: Use a soft, dry, lint-free cloth to clean the exterior of the ampBrug ikke slibende rengøringsmidler, voks eller opløsningsmidler.
- Ventilation: Periodically check that the ventilation slots are clear of dust and debris.
- Opbevaring: Hvis enheden opbevares i længere tid, skal den afbrydes fra strømmen og opbevares et køligt og tørt sted.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen strøm | Power cable not connected; Rear power switch off; Blown fuse | Check power cable connection; Ensure rear power switch is ON; Replace fuse (refer to safety info) |
| Ingen lyd | Incorrect input selected; Speaker cables loose/incorrectly connected; Volume too low; Mute engaged | Select correct input; Check speaker connections and polarity; Increase volume; Check if mute is active |
| Bluetooth ikke parring | AmpFjernbetjeningen er ikke i parringstilstand; Enheden er for langt væk; Interferens | Ensure Bluetooth input is selected; Move device closer; Reduce interference from other wireless devices |
| Forvrænget lyd | Source signal too high; Speaker impedance mismatch; Damaged cables | Reduce source volume; Ensure speakers match amplifier impedance; Check/replace cables |
Specifikationer
- Model: Audiolab 6000A
- Udgangseffekt: 50W x 2 into 8 Ohms
- DAC: ESS 9018K2M
- Forbindelse: Bluetooth aktiveret
- Driftstilstande: Integreret, Pre-Power, Pre-Amplivligere
- Produktdimensioner: 13 x 17.5 x 3.15 tommer
- Vægt: 21.6 pund
- Voltage: 100 volt
- Minimumsforsyning Voltage: 15 volt (DC)
Garanti og support
For warranty information and technical support, please refer to the warranty card included with your product or visit the official Audiolab webwebsted. Gem din købsbevis i tilfælde af garantikrav.
Fabrikant: Audiolab
