Produkt overview
The Sonew IP67 RFID Card Door Access Controller Keypad is a multi-functional access control system designed for secure entry management. It supports access via PIN codes (4-6 digits), RFID cards, or a combination of both. The system features an administrator card for efficient user management, anti-stress and anti-submarine back functions, and intelligent keyboard lighting. Its robust zinc alloy electroplated anti-vandal case ensures durability and resistance against explosion and prying. This device is suitable for various applications including homes, offices, and residential areas.
Figur 1: Forside view of the Sonew IP67 RFID Card Door Access Controller Keypad.
Pakkens indhold
Når du åbner pakken, skal du kontrollere, at alle komponenter er til stede og ubeskadigede:
- 1 x Metal Access Controller Keypad
- 1 x Access Controller Card (Admin Card)
- 1 x Set of Installation Accessories (screws, anchors, hex key)
- 1 x Engelsk brugermanual (dette dokument)
Figure 2: Included components: the access controller, admin card, installation accessories, and user manual.
Opsætning og installation
1. Fysisk installation
The Sonew Access Controller is designed for both indoor and outdoor use with its IP67 waterproof rating. Choose a suitable mounting location near the door or gate where access control is required.
- Forbered monteringsoverfladen: Sørg for, at overfladen er flad og stabil.
- Markér borepunkter: Use the back plate of the controller as a template to mark the positions for drilling holes.
- Bore huller: Drill holes at the marked positions for the mounting screws and for routing the wiring.
- Secure the Back Plate: Attach the back plate to the wall using the provided screws and anchors.
- Rute ledninger: Pass the necessary wiring through the designated opening in the back plate. Refer to the wiring diagram in the manual for correct connections.
- Tilslut controlleren: Carefully align the controller with the back plate and secure it using the small hex screw at the bottom.
Figur 3: Bagside view of the access controller, indicating wiring connections and mounting points.
Figure 4: The IP67 waterproof design allows for reliable outdoor installation.
2. Elektriske forbindelser
The device operates on DC 12V. Ensure proper polarity and secure connections to avoid damage.
- Strømforsyning: Connect the DC 12V power supply to the designated power input terminals.
- Elektrisk lås: Connect the electric lock to the lock output terminals. The open time is adjustable from 0-120 seconds.
- Alarmoutput: If an external alarm device is used, connect it to the alarm output terminals.
- Dørklokke: Connect an external doorbell to the bell button interface.
- Wiegand output: For integration with other access control systems, connect the Wiegand output (Wg26 card number or Wg4 buttons) to the external reader.
Vigtig: Always disconnect power before making any electrical connections. Consult a qualified electrician if you are unsure about the wiring process.
Betjeningsvejledning
1. Initial Power-Up and Admin Card
Upon first power-up, the system will be in its default state. The administrator card is crucial for initial setup and user management.
- Activate Admin Card: Present the provided "Admin Card" to the keypad. This registers it as the master administrator card.
- Gå ind i programmeringstilstand: Once the Admin Card is registered, you can use it to enter programming mode for adding or deleting users.
Figure 5: The keypad offers a dexterity panel for secure and reliable operation.
Figure 6: The luminous keyboard ensures visibility and usability in low-light conditions.
2. Brugerstyring
The system supports up to 3000 users. Users can be added or deleted using the administrator card or directly via the keypad.
- Adding Users (Card): Enter programming mode, present the new user card to the keypad. The card will be registered.
- Adding Users (PIN): Enter programming mode, input a 4-6 digit PIN, then press #. The PIN will be registered.
- Deleting Users (Card): Enter programming mode, present the card to be deleted. The card will be removed from the system. This is useful if a card is lost.
- Deleting Users (PIN): Enter programming mode, input the PIN to be deleted, then press #. The PIN will be removed.
- User Modification Password: Users can revise their door password independently.
3. Adgangsmetoder
The system offers three methods for door access:
- Kortadgang: Present a registered RFID card to the keypad. The door will unlock if the card is valid.
- Code Access: Enter a registered 4-6 digit PIN code on the keypad, then press #. The door will unlock if the code is valid.
- Card + Code Access: Present a registered RFID card, then immediately enter the associated PIN code and press #. This method provides an additional layer of security.
The search speed to open the door is less than 0.1 seconds.
Opretholdelse
Regular maintenance ensures the longevity and optimal performance of your access controller.
- Rensning: Tør tastaturets overflade af med en blød kludamp klud. Undgå slibende rengøringsmidler eller opløsningsmidler, der kan beskadige overfladen eller elektronikken.
- Undersøg ledninger: Periodically check all wiring connections for any signs of wear, corrosion, or loose connections. Ensure all connections are secure.
- Miljøtjek: Although IP67 rated, ensure the unit is not constantly submerged or exposed to extreme conditions beyond its specified operating temperature and humidity ranges.
Fejlfinding
If you encounter issues with your Sonew Access Controller, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Keypad unresponsive / No power | No power supply; Loose wiring; Faulty power adapter. | Check DC 12V power connection. Ensure all wires are securely connected. Test power adapter. |
| Access denied (valid card/code) | Card/code not properly registered; Incorrect access mode (e.g., expecting card+code); System error. | Re-register the card/code. Verify the access mode setting. Power cycle the device. |
| Door does not unlock | Electric lock wiring issue; Lock mechanism fault; Incorrect open time setting. | Check electric lock connections. Ensure the lock is functional. Adjust the open time setting (0-120 seconds). |
| Alarmen lyder uventet | Tampering detected (demolition alarm); Short circuit in alarm output. | Tjek for fysisk tampering. Inspect alarm output wiring for short circuits. The system has an output short circuit protection. |
| Keyboard lights not working | Intelligent keyboard lamp feature not activated; Power issue. | Ensure the machine operation activates the digital light. Check power supply. |
Video 1: Demonstration of the Access Control System Kit, showing keypad interaction and internal components.
Specifikationer
Detailed technical specifications for the Sonew IP67 RFID Card Door Access Controller Keypad:
| Feature | Værdi |
|---|---|
| Varetype | Adgangscontroller |
| Farve | Sølv |
| Arbejde bindtage | DC 12V |
| Statisk strøm | ≤40mA |
| Læseområde | ≥30 mm |
| Brugerkapacitet | 3000 brugere |
| Omgivelsestemperatur | -40℃ til 60℃ (-40°F til 140°F) |
| Omgivende luftfugtighed | 10%-98% |
| Electricity Lock Output | ≤2A |
| Alarmudgang | ≤500mA |
| Open Time (Adjustable) | 0-120 sekunder |
| Varestørrelse (L*B*H) | 11 x 7.5 x 2.2 cm (4.33 x 2.95 x 0.86 tommer) |
| Varens vægt | 522 g (18.41 oz) |
| Beskyttelsesvurdering | IP67 vandtæt |
| Wiegand Output | Wg26 card number or Wg4 buttons |
Garanti og support
Sonew products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty information provided with your purchase documentation or contact Sonew customer support directly.
For technical assistance, troubleshooting beyond this manual, or inquiries regarding product functionality, please contact Sonew customer support through their official channels. Keep your product model number (AF00052) and purchase details ready when contacting support.