Tenda TEG1124P-24-250W Unmanaged Gigabit PoE Ethernet Switch User Manual

1. Introduktion

This user manual provides detailed instructions for the installation, configuration, and operation of the Tenda TEG1124P-24-250W Unmanaged Gigabit PoE Ethernet Switch. Please read this manual thoroughly before using the device to ensure proper setup and optimal performance. Keep this manual for future reference.

2. Produktet er slutview

2.1 Nøglefunktioner

• 24 Gigabit Ethernet Ports (10/100/1000 Mbps)
• Power over Ethernet (PoE) support on all 24 ports
• Unmanaged switch for plug-and-play simplicity
• Total PoE power budget of 250 Watts
• Holdbart metal casing for robust performance
• Compatible with various PoE-powered devices such as IP cameras

2.2 Pakkens indhold

• Tenda TEG1124P-24-250W Unmanaged Gigabit PoE Ethernet Switch
• Rack Mount Kit
• 4 trædepuder
• Strømledning
• Hurtig installationsvejledning

Figur 1: Forside view of the Tenda TEG1124P-24-250W Unmanaged Gigabit PoE Ethernet Switch, showing 24 RJ45 ports and LED indicators.

3. Opsætning

3.1 Fysisk installation

The Tenda TEG1124P-24-250W switch can be installed on a desktop or mounted in a standard 19-inch equipment rack.

• Desktopplacering: Attach the included rubber foot pads to the bottom of the switch. Place the switch on a flat, stable surface with adequate ventilation.
• Rack montering: Use the provided rack mount brackets and screws to secure the switch into a standard 19-inch equipment rack. Ensure proper airflow around the device.

Figure 2: Diagram illustrating the dimensions of the Tenda TEG1124P-24-250W switch: approximately 24.64 cm length, 16.51 cm width, and 2.79 cm height.

3.2 Tilslutning af enheder

• Strømtilslutning: Connect the provided power cord to the power inlet on the rear panel of the switch and then to a suitable power outlet.
• Netværksenheder: Connect your network devices (e.g., computers, servers, NVRs) to any of the 24 RJ45 ports using standard Ethernet cables.
• PoE-enheder: For Power over Ethernet (PoE) compatible devices (e.g., IP cameras, VoIP phones, wireless access points), connect them to any of the 24 RJ45 ports. The switch will automatically detect and provide power to these devices if they are PoE compliant and within the switch's power budget.

4. Betjeningsvejledning

4.1 Tænd

After connecting the power cord, the switch will automatically power on. The Power LED indicator on the front panel should illuminate, indicating that the device is receiving power.

4.2 LED-indikatorer

Frontpanelet på kontakten har LED-indikatorer, der giver statusinformation:

• Power LED: Lyser, når kontakten er tændt.
• Link/Act-LED'er (pr. port):
  • Solid grøn: A stable network link is established.
  • Blinkende grønt: Data sendes eller modtages via porten.
  • Slukket: No network link is detected.
• PoE Status LEDs (per port):
  • Solid gul: PoE-strøm forsynes til den tilsluttede enhed.
  • Blinkende gul: PoE power fault or overload detected.
  • Slukket: No PoE device connected or no power being supplied.

4.3 PoE-funktionalitet

The TEG1124P-24-250W switch automatically detects and supplies power to IEEE 802.3af/at compliant Powered Devices (PDs) connected to its ports. It is an unmanaged switch, meaning no configuration is required for basic network and PoE operation. The total power budget for PoE is 250W. Ensure that the total power consumption of all connected PoE devices does not exceed this limit.

5. Vedligeholdelse

To ensure the longevity and reliable operation of your Tenda switch, follow these maintenance guidelines:

• Rensning: Rengør regelmæssigt ydersiden af ​​kontakten med en blød, tør klud. Brug ikke flydende rengøringsmidler eller rengøringsmidler på sprayform. Sørg for, at ventilationsåbningerne er fri for støv og blokeringer.
• Ventilation: Sørg for, at kontakten er placeret et godt ventileret område for at forhindre overophedning. Bloker ikke ventilationshullerne.
• Miljøforhold: Operate the switch within the recommended temperature and humidity ranges specified in the product specifications.
• Kabelstyring: Hold netværkskablerne organiseret og korrekt fastgjort for at forhindre utilsigtede afbrydelser eller beskadigelse.

6. Fejlfinding

If you encounter issues with your Tenda TEG1124P-24-250W switch, refer to the following common problems and solutions:

• Ingen strøm:
  • Sørg for, at netledningen er korrekt tilsluttet afbryderen og en fungerende stikkontakt.
  • Kontroller, at stikkontakten fungerer ved at tilslutte en anden enhed.
  • Check the Power LED on the front panel. If it is off, contact technical support.
• Ingen netværksforbindelse:
  • Check the Link/Act LED for the connected port. If it is off, ensure the Ethernet cable is properly connected at both ends.
  • Prøv et andet Ethernet-kabel eller en anden port.
  • Verify that the connected device (e.g., computer, router) is powered on and functioning correctly.
• PoE-enhed tænder ikke:
  • Check the PoE Status LED for the connected port. If it is off, ensure the device is PoE compliant (IEEE 802.3af/at).
  • If the PoE LED is flashing yellow, there might be a power fault or overload. Disconnect other PoE devices to reduce the total power load.
  • Ensure the connected PoE device is not drawing more power than the switch can provide per port or exceeding the total 250W budget.
  • Try connecting the PoE device to a different port.

7. Specifikationer

8. Garanti og support

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Tenda website. You may also contact your local distributor or reseller for assistance.