Ascher 60 Watt Equivalent E26 A19 LED Filament Light Bulbs User Manual

1. Introduktion

Thank you for choosing Ascher LED Filament Light Bulbs. This manual provides essential information for the safe and efficient use of your new light bulbs. These bulbs are designed to replace traditional 60W incandescent bulbs with energy-efficient 6W LEDs, offering a warm white 2700K light with a classic clear glass A19 design.

2. Vigtige sikkerhedsinstruktioner

• Ikke-dæmpbar: These E26 LED bulbs are NOT DIMMABLE. Do not use them with dimmer switches, as this may cause flickering, damage to the bulb, or reduce its lifespan.
• Ensure the power supply is turned off before installing or removing the bulb.
• For indoor use only. Do not expose to direct water or extreme humidity.
• Pæren må ikke skilles ad eller ændres.
• Avoid touching the bulb when it is operating or immediately after turning it off, as it may be hot.
• Install in appropriate fixtures with an E26 medium base.

Image: A warning indicating that the E26 LED bulb is not dimmable and should not be used with a dimmer switch.

3. Opsætning og installation

These bulbs are designed for easy installation into standard E26 medium base sockets.

1. Sluk for strømmen: Before installation, ensure the power to the light fixture is completely turned off at the circuit breaker or wall switch.
2. Indsæt pære: Carefully screw the Ascher LED bulb into the E26 medium base socket until it is snug. Do not overtighten.
3. Gendan strøm: Tænd for strømmen igen på afbryderen eller vægkontakten.

Image: A pack of six Ascher E26 A19 LED filament light bulbs, showcasing their clear glass design and standard base.

4. Betjeningsvejledning

Operating your Ascher LED Filament Light Bulbs is straightforward:

• Simply use the standard wall switch connected to your light fixture to turn the bulbs on or off.
• These bulbs provide instant-on illumination without any warm-up time.
• As previously noted, these bulbs are non-dimmable. Attempting to dim them may result in malfunction or damage.

5. Pleje og vedligeholdelse

To ensure the longevity and optimal performance of your Ascher LED bulbs:

• Rensning: Disconnect power before cleaning. Use a soft, dry cloth to wipe the bulb. Do not use liquid cleaners or abrasive materials.
• Udskiftning: When replacing a bulb, ensure the power is off and the bulb has cooled down completely.
• Avoid frequent switching on and off, as this can slightly reduce the lifespan of any LED bulb.

6. Fejlfinding

If you encounter any issues with your Ascher LED Filament Light Bulbs, please refer to the following common solutions:

• Pæren lyser ikke:
  • Kontroller, om afbryderen er tændt.
  • Sørg for, at pæren er skruet forsvarligt ind i fatningen.
  • Verify that the fixture itself is receiving power.
• Pære flimrende:
  • Confirm that the bulb is not connected to a dimmer switch. These bulbs are non-dimmable.
  • Kontroller for løse forbindelser i armaturet eller ledningerne.
• Light is Too Dim or Too Bright:
  • Sørg for, at pæren er varmtage and brightness (750 lumens) are suitable for your intended application.
  • Verify the color temperature (2700K Warm White) matches your preference.

Image: Illustrates the flicker-free performance of Ascher 6W bulbs compared to other brands that may exhibit frequent flickering.

7. Produktspecifikationer

Image: Detailed lighting facts for the A19 LED bulb, highlighting its 750 lumens brightness, 6W energy consumption, 20,000 hours lifespan, 2700K warm white color, 280-degree beam angle, and E26 base.

8. Garanti og kundesupport

Ascher products are manufactured with quality and reliability in mind. For specific warranty details and customer support, please refer to the information provided at the point of purchase or visit the official Ascher webwebsted. Gem din købskvittering for garantikrav.