MEAN WELL UHP-200-12 Slim Type PFC Switching Strømforsyning Brugermanual

1. Introduktion

This manual provides essential information for the safe and efficient operation of the MEAN WELL UHP-200-12 200W Slim Type Switching Power Supply. Please read this manual thoroughly before installation and use, and retain it for future reference. The UHP-200-12 is a 200W single-output slim type power supply with a 26mm low profile design, featuring a full range 90~264VAC input and built-in active PFC function.

Figur 1.1: Overview of the MEAN WELL UHP-200-12 power supply. This image displays the compact, slim design of the unit, highlighting its metallic casing with ventilation grilles and terminal block connections.

2. Funktioner

The UHP-200-12 power supply incorporates several key features designed for performance and reliability:

• Slank og lav profile (26 mm)
• Fanless design, 200W convection
• Tåler 300VAC overspændingsinput i 5 sekunder
• Indbygget aktiv PFC-funktion
• 150% peak load capability (100ms)
• 30~+70°C working temperature
• Beskyttelser: Kortslutning / Overbelastning / Over voltage / Overtemperatur
• DC OK active signal and redundant function (option)
• Driftshøjde op til 5000 meter (Note.5)
• LED-indikator for tænding
• 3 års garanti

3. Ansøgninger

The UHP-200-12 is suitable for a variety of applications due to its robust design and features:

• Industrielle automationsmaskiner
• Industrielt kontrolsystem
• Mekanisk og elektrisk udstyr
• Elektroniske instrumenter, udstyr eller apparater
• Husholdningsapparater
• LED display applikation

4. Sikkerhedsoplysninger og juridisk ansvarsfraskrivelse

ADVARSEL: Risk of electric shock. All installation and servicing must be performed by qualified personnel. Ensure the power supply is disconnected from the main power source before any installation, wiring, or maintenance procedures.

This device is designed for professional use and should be installed in an enclosure that provides adequate protection against accidental contact with live parts. Ensure proper grounding and ventilation as per local electrical codes and standards.

Juridisk ansvarsfraskrivelse: Part Status: Active. Type: Enclosed. Input: 90 ~ 264 VAC, 127 ~ 370 VDC. Applications: Household Appliances, ITE (Commercial). Voltage - Isolation: 3.75kV. Efficiency: 89%. Operating Temperature: -30°C ~ 70°C (With Derating).

5. Opsætning og installation

Follow these guidelines for proper setup and installation:

1. Montering: Mount the power supply in a well-ventilated area, ensuring adequate clearance for heat dissipation. The fanless design relies on convection cooling.
2. Indgangsledning: Connect the AC input (L, N, and FG) to the designated input terminals. Ensure the input voltage is within the specified range of 90-264VAC or 127-370VDC.
3. Udgangsledning: Connect the DC output (+V and -V) to your load. Observe correct polarity. Refer to the specifications for the output voltage og aktuelle vurderinger.
4. Jording: Ensure the Frame Ground (FG) terminal is properly connected to earth ground to prevent electrical shock and ensure stable operation.
5. Overvejelser om belastning: Do not exceed the rated output power. Consider the 150% peak load capability for short durations if your application requires it.

Figur 5.1: Detaljeret view of the MEAN WELL UHP-200-12 connection terminals. This image shows the input and output terminal blocks, along with product labeling and safety certifications, crucial for correct wiring.

6. Betjeningsvejledning

Once installed, the UHP-200-12 operates automatically. The power-on LED indicator will illuminate when the unit is receiving power and functioning correctly. Monitor the load to ensure it does not exceed the power supply's continuous rating. The unit is designed for convection cooling, so maintaining proper airflow around the unit is essential for optimal performance and longevity, especially in higher ambient temperatures.

7. Vedligeholdelse

The UHP-200-12 is designed for minimal maintenance. Periodically inspect the unit for:

• Accumulation of dust or debris on the casing, especially around ventilation areas. Clean with a soft, dry cloth or compressed air if necessary.
• Loose wiring connections. Ensure all input and output terminals are securely fastened.
• Tegn på fysisk skade eller overophedning.

Afbryd altid strømmen, før du udfører vedligeholdelse.

8. Fejlfinding

If the power supply is not functioning as expected, perform the following basic checks:

• No Output Voltage / Power LED Off:
  • Check the AC input power connection.
  • Bekræft input voltage er inden for det angivne område.
  • Ensure no short circuit exists at the output terminals.
• Udgang Voltage Fluctuating / Unstable:
  • Check if the load exceeds the rated power.
  • Ensure proper ventilation and operating temperature.
  • Bekræft, at alle forbindelser er sikre.
• Over-temperature Protection Activated:
  • Reducer omgivelsestemperaturen.
  • Improve ventilation around the unit.
  • Reduce the load if it is consistently high.

If issues persist after these checks, contact technical support.

9. Specifikationer

Detailed specifications for the MEAN WELL UHP-200-12:

Figur 9.1: Comprehensive specification table for the MEAN WELL UHP-200 series, including electrical characteristics, protection features, and environmental conditions. This image provides detailed technical data for various models within the series, with the UHP-200-12 being one of them.

10. Garanti og support

The MEAN WELL UHP-200-12 power supply comes with a 3 års garanti from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims or technical support, please contact your authorized MEAN WELL distributor or the manufacturer directly. Ensure you have your product model number (UHP-200-12) and proof of purchase available when seeking support.